LINUX.ORG.RU

smart. Как я понял моему диску pre-fail ?

 , ,


1

1

Или ещё поживёт?

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   064   055   006    Pre-fail  Always       -       160655004
  3 Spin_Up_Time            0x0003   099   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       1006
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   090   060   030    Pre-fail  Always       -       957887060
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       20267
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   095   095   020    Old_age   Always       -       6081
194 Temperature_Celsius     0x0022   039   059   000    Old_age   Always       -       39
195 Hardware_ECC_Recovered  0x001a   064   055   000    Old_age   Always       -       160655004
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       4
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       4
199 UDMA_CRC_Error_Count    0x003e   200   191   000    Old_age   Always       -       76
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

☆☆☆

Последнее исправление: CYB3R (всего исправлений: 1)

Ответ на: комментарий от anonymous

Более того, тебе тоже.

А мне то почему?

rezedent12 ☆☆☆
() автор топика

Да тут по-моему и спрашивать нечего. С таким количеством ошибок диск давно пора менять. Пока не поздно.

shell-script ★★★★★
()
Ответ на: комментарий от rezedent12

Если «вроде» стремится к вероятности в 99.999999999999%, то лучше проверьте фирменной утилитой. Seagate в 1 атрибут пишет свои значения, обычный smartctl считает, но интерпретировать значение пользователь может неверно.

aludov
()

Как я понял моему диску pre-fail ?

pre-fail — это тип параметра, а не состояние. Его приближение к границе означает предаварийное состояние. Old_age — увеличивается с возрастом. Там же в заголовке таблицы написано: TYPE.

i-rinat ★★★★★
()
Ответ на: комментарий от shell-script

нет, это кое-кому давно пора научиться читать smart

anonymous
()
Ответ на: комментарий от aludov

Seagate в 1 атрибут пишет свои значения

Не только в первый, но и в седьмой (Seek_Error_Rate), и в 195-й (Hardware_ECC_Recovered). Общественность предполагает, что:

а) у Raw_Read_Error_Rate и Hardware_ECC_Recovered threshold должен быть 36 (труп), а стартовое нормализованное значение — 120;

б) в Seek_Error_Rate младшие четыре байта суть кол-во позиционирования по секторам вообще, а в старших двух — кол-во ошибок позиционирования.

У меня, например, есть такой 7200.14:

7  Seek_Error_Rate  0x000f  062  060  030  Pre-fail  Always  -  21485287646

Т. е., ошибок позиционирования было пять — и таки да, раз пять он пискнул.

ksa242
()

У сигейтов большой Raw Read Error ЕМНИМС является нормальным. Про то как читать Seek Error Rate - тебе уже выше подсказали.

В целом винт пока живой.

svr4
()
Ответ на: комментарий от shell-script

Какие ошибки??? 4 пендинга????? И 0 римэпов????

Винт в общем-то в отлином состоянии. Прогнать badblocks, и прописать нечитающиеся LBA (ну или whdd поюзать). И все.

А, да, чуть не забыл. Озаботиться нормальным охлаждением. Перегрев до 59 градусов - сильно нехорошо.

ЗЫ если есть настроение - снять плату, и тщательно промыть спиртом контакты... Даже если чистые. Для долгой счастливой жизни.

NiTr0 ★★★★★
()

это ты pre-fail. А smartctl пишет тип датчика

cvs-255 ★★★★★
()
Ответ на: комментарий от NiTr0

То есть всё дело исключительно в перегреве? Я снял крышку системного блока и поставил диск вертикально, вроде пока работает.

rezedent12 ☆☆☆
() автор топика
Ответ на: комментарий от NiTr0
=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus
Device Model:     ST340014A
Serial Number:    5JX50NM3
Firmware Version: 3.06
User Capacity:    40 019 582 464 bytes [40,0 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Fri Nov  1 17:23:13 2013 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  31) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   064   055   006    Pre-fail  Always       -       192870265
  3 Spin_Up_Time            0x0003   098   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       1006
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   090   060   030    Pre-fail  Always       -       959363944
  9 Power_On_Hours          0x0032   077   077   000    Old_age   Always       -       20287
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   095   095   020    Old_age   Always       -       6092
194 Temperature_Celsius     0x0022   038   059   000    Old_age   Always       -       38
195 Hardware_ECC_Recovered  0x001a   064   055   000    Old_age   Always       -       192870265
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       4
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       4
199 UDMA_CRC_Error_Count    0x003e   200   191   000    Old_age   Always       -       76
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 3109 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
rezedent12 ☆☆☆
() автор топика
Ответ на: комментарий от NiTr0
Error 3109 occurred at disk power-on lifetime: 11144 hours (464 days + 8 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 01 00 00 00 e0  Error: ICRC, ABRT 1 sectors at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 01 00 00 00 e0 00      00:00:27.062  READ DMA
  b0 da 00 00 4f c2 e0 00      00:00:27.062  SMART RETURN STATUS
  b0 d2 00 00 4f c2 e0 00      00:00:27.061  SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE
  b0 d8 00 00 4f c2 e0 00      00:00:27.061  SMART ENABLE OPERATIONS
  f5 00 00 00 00 00 e0 00      00:00:27.061  SECURITY FREEZE LOCK

Error 3108 occurred at disk power-on lifetime: 8581 hours (357 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 ca 9b eb e0  Error: UNC at LBA = 0x00eb9bca = 15440842

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 01 ca 9b eb e0 00      00:32:02.764  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:32:02.749  READ DMA
  40 00 01 c9 9b eb e0 00      00:32:02.736  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:32:02.723  READ DMA
  40 00 02 c9 9b eb e0 00      00:32:02.711  READ VERIFY SECTOR(S)

Error 3107 occurred at disk power-on lifetime: 8581 hours (357 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 ca 9b eb e0  Error: UNC at LBA = 0x00eb9bca = 15440842

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 02 c9 9b eb e0 00      00:32:02.764  READ VERIFY SECTOR(S)
  c8 00 01 fc 08 fa e0 00      00:32:02.749  READ DMA
  40 00 02 c7 9b eb e0 00      00:32:02.736  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:32:02.723  READ DMA
  40 00 04 cb 9b eb e0 00      00:32:02.711  READ VERIFY SECTOR(S)

Error 3106 occurred at disk power-on lifetime: 8581 hours (357 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 01 ca 9b eb e0  Error: UNC at LBA = 0x00eb9bca = 15440842

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 04 c7 9b eb e0 00      00:31:51.827  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:31:51.818  READ DMA
  40 00 08 c7 9b eb e0 00      00:31:48.238  READ VERIFY SECTOR(S)
  40 00 08 bf 9b eb e0 00      00:31:48.226  READ VERIFY SECTOR(S)
  c8 00 01 fc 08 fa e0 00      00:31:48.211  READ DMA

Error 3105 occurred at disk power-on lifetime: 8581 hours (357 days + 13 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 ca 9b eb e0  Error: UNC at LBA = 0x00eb9bca = 15440842

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  40 00 08 c7 9b eb e0 00      00:31:51.827  READ VERIFY SECTOR(S)
  40 00 08 bf 9b eb e0 00      00:31:51.818  READ VERIFY SECTOR(S)
  c8 00 01 fc 08 fa e0 00      00:31:48.238  READ DMA
  40 00 10 cf 9b eb e0 00      00:31:48.226  READ VERIFY SECTOR(S)
  c8 00 01 00 00 00 e0 00      00:31:48.211  READ DMA

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
rezedent12 ☆☆☆
() автор топика

20к часов - много. Вроде как гарантийный срок, что ли... Вообще многовато ошибок, даже для Сигейта. Очень советую скорее бэкапить хоть куда и отложить денежку на новый винт. На всякий случай.

abcarado
()
Ответ на: комментарий от NiTr0

LBA 15440842 пропишите нулями. Потом останется еще 3 пендинг сектора найти...

А как напрямую нули прописать?

rezedent12 ☆☆☆
() автор топика
Ответ на: комментарий от pekmop1024

Ну не сказал бы, Current_Pending не нулевой. Оно, конечно, само по себе ещё ничего не говорит, но звонок уже прозвенел. А ложное срабатывание или нет - это уже только постоянным мониторингом понять можно.

redgremlin ★★★★★
()
Ответ на: комментарий от redgremlin

Current_Pending

Ну оно чаще всего софтовое от случайных вибраций...

pekmop1024 ★★★★★
()
21 февраля 2015 г.
Ответ на: комментарий от abcarado

20к часов - много

та ладно?

# smartctl -a /dev/sdb
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.18.1-gentoo] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12
Device Model:     ST31000528AS
Serial Number:    9VPB0XY9
LU WWN Device Id: 5 000c50 02d71c4db
Firmware Version: CC46
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sat Feb 21 17:03:28 2015 ALMT

...

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   118   099   006    Pre-fail  Always       -       189763219
  3 Spin_Up_Time            0x0003   094   094   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   097   097   020    Old_age   Always       -       3475
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   077   060   030    Pre-fail  Always       -       58708198
  9 Power_On_Hours          0x0032   073   073   000    Old_age   Always       -       24356
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1735
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   097   000    Old_age   Always       -       65961
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   065   053   045    Old_age   Always       -       35 (Min/Max 17/35)
194 Temperature_Celsius     0x0022   035   047   000    Old_age   Always       -       35 (0 13 0 0 0)
195 Hardware_ECC_Recovered  0x001a   029   021   000    Old_age   Always       -       189763219
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       29066 (152 34 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       2850292620
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       4284620871

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     24163         -
# 2  Extended offline    Completed without error       00%     22636         -
# 3  Extended offline    Completed without error       00%     20305         -
# 4  Extended offline    Completed without error       00%     19375         -
# 5  Extended offline    Completed without error       00%     15682         -
Alyssa
()
Ответ на: комментарий от Alyssa

это при том, что я пьяным несколько раз пинал ногой системник, отчего плаксиво умер намного более новый двухтерабайтник Hitachi

Alyssa
()
Ответ на: комментарий от Alyssa
  9 Power_On_Hours          0x0032   073   073   000    Old_age   Always       -       23795

я тебя всё ещё не догнал. :(

ну зато

  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       401
wakuwaku ★★★★
()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.