xwindow - вешается машина...

Ну и где рассказ о том, какая видеокарта, что написано в xorg.conf, что в dmesg, что в grub.conf ?

8) карта видео встроеная intel 82945G (8-64 Mb)

xorg.conf -------------------

# Xorg configuration created by system-config-display

Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection

Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts.

RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection

Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection

Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection

Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection

Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Unknown monitor" HorizSync 31.5 - 37.9 VertRefresh 50.0 - 70.0 Option "dpms" EndSection

Section "Device" Identifier "Videocard0" Driver "i810" VendorName "Videocard vendor" BoardName "Intel 945" EndSection

Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "800x600" "640x480" EndSubSection EndSection

Section "DRI" Group 0 Mode 0666 EndSection

dmesg

Bootdata ok (command line is ro root=LABEL=/ rhgb quiet) Linux version 2.6.9-42.ELsmp (bhcompile@ls20-bc1-13.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-2)) #1 SMP Wed Jul 12 23:32:02 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f790000 (usable) BIOS-e820: 000000003f790000 - 000000003f79e000 (ACPI data) BIOS-e820: 000000003f79e000 - 000000003f7e0000 (ACPI NVS) BIOS-e820: 000000003f7e0000 - 000000003f800000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fafb0 ACPI: RSDT (v001 A_M_I_ OEMRSDT 0x01000724 MSFT 0x00000097) @ 0x000000003f790000 ACPI: FADT (v001 A_M_I_ OEMFACP 0x01000724 MSFT 0x00000097) @ 0x000000003f790200 ACPI: MADT (v001 A_M_I_ OEMAPIC 0x01000724 MSFT 0x00000097) @ 0x000000003f790390 ACPI: OEMB (v001 A_M_I_ AMI_OEM 0x01000724 MSFT 0x00000097) @ 0x000000003f79e040 ACPI: HPET (v001 A_M_I_ OEMHPET 0x01000724 MSFT 0x00000097) @ 0x000000003f795060 ACPI: MCFG (v001 A_M_I_ OEMMCFG 0x01000724 MSFT 0x00000097) @ 0x000000003f7950a0 ACPI: DSDT (v001 A0605 A0605000 0x00000000 INTL 0x20051117) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000003f790000 Bootmem setup node 0 0000000000000000-000000003f790000 No mptable found. On node 0 totalpages: 259984 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 255888 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.4 present. ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:6 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:6 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) Setting APIC routing to flat ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x8086a201 base: 0xfed00000

ух.. напесало... режим не тот... шас попробуем продолжить по другому...

Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3f800000:c0380000)
Checking aperture...
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 14.318180 MHz HPET timer.
time.c: Detected 3000.028 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 1017864k/1039936k available (2105k kernel code, 0k reserved, 1297k data, 196k init)
Calibrating delay using timer specific routine.. 6004.76 BogoMIPS (lpj=3002381)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU0: Initial APIC ID: 0, Physical Processor ID: 0
Using IO APIC NMI watchdog
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU0: Initial APIC ID: 0, Physical Processor ID: 0
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 05
per-CPU timeslice cutoff: 615.86 usecs.
task migration cache decay timeout: 1 msecs.
Booting processor 1/1 rip 6000 rsp 1003e975f58
Initializing CPU#1
Calibrating delay using timer specific routine.. 5999.78 BogoMIPS (lpj=2999894)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU1: Initial APIC ID: 1, Physical Processor ID: 0
Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 05
Total of 2 processors activated (12004.55 BogoMIPS).
activating NMI Watchdog ... done.
testing NMI watchdog ... OK.
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
time.c: Using HPET/TSC based timekeeping.
checking if image is initramfs... it is
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at f0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)

usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 177
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 185
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 177
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 209
GSI 22 sharing vector 0xD9 and IRQ 22
ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 217
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 185
PCI-DMA: Disabling IOMMU.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1178281539.363:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 932641B92433EA6E
- User ID: Red Hat, Inc. (Kernel Module GPG key)

pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Processor [CPU2] (supports C1, 8 throttling states)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 945G Chipset.
agpgart: Maximum main memory to use for agp memory: 933M
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 209
ICH7: chipset revision 1
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: TSSTcorp CD-ROM SH-C522C, ATAPI CD/DVD-ROM drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: ATAPI 52X CD-ROM drive, 96kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 131072 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 131072)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
ACPI wakeup devices:
P0P1 P0P3 P0P9 P0P8 P0P7 P0P6 P0P5 P0P4 PS2K PS2M UAR1 USB2 USB3 USB4 MC97 USB1 EUSB
Freeing unused kernel memory: 196k freed
SCSI subsystem initialized
libata version 1.20 loaded.

ata_piix 0000:00:1f.2: version 1.05 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB400 irq 217 ata2: SATA max UDMA/133 cmd 0xC000 ctl 0xB802 bmdma 0xB408 irq 217 ata1: dev 0 cfg 49:2f00 82:346b 83:7fe9 84:4773 85:3469 86:bc01 87:4763 88:207f ata1: dev 0 ATA-7, max UDMA/133, 321672960 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ata2: SATA port has no device. scsi1 : ata_piix Vendor: ATA Model: Hitachi HDS72161 Rev: P22O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) SCSI device sda: drive cache: write back SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 security: 3 users, 4 roles, 355 types, 26 bools security: 55 classes, 22582 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda6, type ext2), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), not configured for labeling SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts inserting floppy driver for 2.6.9-42.ELsmp Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker

ыыы...

ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 185
divert: allocating divert_blk for eth0
eth0: VIA Rhine III at 0xdffffc00, 00:17:9a:bf:e9:ef, IRQ 185.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
hw_random: cannot enable RNG, aborting
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 177
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 177, pci mem ffffff0000068c00
SELinux: initialized (dev usbdevfs, type usbdevfs), uses genfs_contexts
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 177, io base 000000000000a000
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 185, io base 000000000000a400
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 193, io base 000000000000a800
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found

hub 4-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 201
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 201, io base 000000000000b000
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
ACPI: Power Button (FF) [PWRF]
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
cdrom: open failed.
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1052220k swap on /dev/sda5. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
microcode: No new microdata for cpu 1
microcode: No new microdata for cpu 0
IA-32 Microcode Update Driver v1.14 unregistered
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
i2c /dev entries driver
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff80405540(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
eth0: no IPv6 routers present

# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,5)
# kernel /boot/vmlinuz-version ro root=/dev/sda6
# initrd /boot/initrd-version.img
#boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,5)/boot/grub/splash.xpm.gz
hiddenmenu
title Red Hat Enterprise Linux AS (2.6.9-42.ELsmp)
root (hd0,5)
kernel /boot/vmlinuz-2.6.9-42.ELsmp ro root=LABEL=/ rhgb quiet
initrd /boot/initrd-2.6.9-42.ELsmp.img
title Red Hat Enterprise Linux AS-up (2.6.9-42.EL)
root (hd0,5)
kernel /boot/vmlinuz-2.6.9-42.EL ro root=LABEL=/ rhgb quiet
initrd /boot/initrd-2.6.9-42.EL.img
title Other
rootnoverify (hd0,0)
chainloader +1