Оптимизация SATA харда

Купил SATA хaрд на замену ide. Как его стоит оптимизировать и стоит ли вообще?

# hdparm -i /dev/sda

/dev/sda:

Model=WDC, FwRev=01.00A01, SerialNo=WD-WCAVU0239296
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=2930277168
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7

* signifies the current active mode


# hdparm /dev/sda

/dev/sda:
multcount = 16 (on)
IO_support = 0 (default)
readonly = 0 (off)
readahead = 256 (on)
geometry = 182401/255/63, sectors = 2930277168, start = 0



# hdparm -t /dev/sda

/dev/sda:
Timing buffered disk reads: 290 MB in 3.01 seconds = 96.29 MB/sec