LINUX.ORG.RU

Canon i-Sensys MF231

 , ,


0

1

I install printer driver for this device from Canon official site. All is good, and I can print documents. But with scanner situation is bad. I see in SANE project page that Canon MF231 is fully supported but system doesn't see any scanner device from USB.

When I check «lsusb», I get:

Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 004: ID 1c4f:0026 SiGma Micro Keyboard Bus 003 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 003 Device 002: ID 04a9:27d1 Canon, Inc. Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub When I enter the command «scanimage -L»:

No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). I read many issues in internet but they very old (since 2007-2011). SANE is fully supported MF231 scan, then why Ubuntu doesn't see scanner of this device?

Can you help me?

Thanks.

(Mozhno otvetit i na russkom/skopiroval s AskUbuntu. Yesli koneshno kto nebud znaet resheniye).


Попробуй установить последнюю git-версию sane. Для ubuntu вот сборка: https://launchpad.net/~rolfbensch/ archive/ubuntu/sane-git

У меня было другое МФУ Cannon, тоже с поддержкой Linux (что для Canon редкость), так там официальный драйвер сканнера можно было использовать только через их собственную малофункциональную программу для сканирования.

te111011010 ()
Ответ на: комментарий от te111011010

Zdelal

Privet. Zdelal kak vi skazali. Posle proizvel find scanner:

orkhan@orkhan-P85-D3:~$ sudo sane-find-scanner

# sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Pipe error could not fetch string descriptor: Pipe error found USB scanner (vendor=0x04a9 [Language Error], product=0x27d1 [Language Error]) at libusb:003:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program.

Vrode snovo tozhe samoe.

Oder ()

Problema reshena.

Okazivaetsa SANE podderzhivaet etot printer pod SANE-Pixma. A paketı dla etovo oboruduvaniye (SANE Pixma) naxoditsa v libsane-dev.

Dla etovo prosto vvodim komandu v terminale:

sudo apt install libsane-dev

Vse. Scanner zarabotal :).

P.S Yesli vdruq u kovo-to budut problemi PO pod root, nuzhno vvesti komandu:

ls -l /usr/bin/simple-scan

i mozhno budet zapuskat pod obicnom polzovatelem simple-scan i skanirovat dokument.

Oder ()
4 июля 2018 г.
16 августа 2018 г.
Ответ на: комментарий от AfterWork

Printer

Zdarova!

Skacay driver ot Linux =https://www.canon.ru/support/ otsuda.[/url Razarxiviruy fayli kuda nebud. Otkroy readme file i procitay kakiye biblioteki ti dolzhen ustonovit dla svoyey OS do nacalo instalacii. Posle etovo otkroy terminal na etoy papke i vvedi komandu:

./install.sh
. V processe ustonovki otkroetsa okno shtobi ti smoq zaregestrirovat` printer v sisteme (u mena podkluceno cerez USB - esli u teba tak zhe viberi USB).

I vse. Printer dolzhen rabotat.

Oder ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.