Void plasma автологин
Привет Лор! Сабж.
В настройках plasma ничего не нашел, может какой пакет недоустановил? В других дистрибутивах это присутствовало.
Сообщения xaTa
Не работают правила udev
Привет ЛОР. Перенес недавно рабочие правила с Arch на VoidLinux. На втором отказываются работать.
Допустим имея в /etc/udev/rules.d/60-battery.rules:
SUBSYSTEM=="power_supply", ENV{POWER_SUPPLY_NAME}=="BAT0", ENV{POWER_SUPPLY_TYPE}=="Battery", ENV{POWER_SUPPLY_STATUS}=="Not charging" RUN+="/usr/local/bin/powerrules"
Скрипт powerrules не запускается. В логах ничего нет, хотя указал режим отладки. Куда копать-смотреть?
Не могу стартануть nvidia-xrun в отдельном tty
Добрый день ЛОР. Сабж.
Делал по арчвики. В первом tty у меня hyprland без xwayland, во втором пытаюсь стартовать nvidia-xrun. BUS ID по моему указыны правильно.
Лог xorg:
[ 2020.296]
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[ 2020.298] Current Operating System: Linux laptop 6.6.56-1-lts #1 SMP PREEMPT_DYNAMIC Thu, 10 Oct 2024 12:04:53 +0000 x86_64
[ 2020.298] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts root=UUID=3302a76f-553c-4f06-b6d2-82c24115e279 rw rootflags=subvol=@ intel_idle.max_cstate=1 intel_pstate=disable vt.global_cursor_default=0 quiet loglevel=2 splash
[ 2020.300]
[ 2020.301] Current version of pixman: 0.43.4
[ 2020.302] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2020.302] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2020.306] (==) Log file: "/home/imax/.local/share/xorg/Xorg.0.log", Time: Thu Oct 17 11:26:00 2024
[ 2020.306] (++) Using config file: "/etc/X11/nvidia-xorg.conf"
[ 2020.307] (++) Using config directory: "/etc/X11/nvidia-xorg.conf.d"
[ 2020.307] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2020.307] (==) ServerLayout "layout"
[ 2020.307] (**) |-->Screen "nvidia" (1)
[ 2020.307] (**) | |-->Monitor "<default monitor>"
[ 2020.308] (**) | |-->Device "nvidia"
[ 2020.308] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 2020.308] (**) |-->Inactive Device "intel"
[ 2020.308] (**) Allowing byte-swapped clients
[ 2020.308] (==) Automatically adding devices
[ 2020.308] (==) Automatically enabling devices
[ 2020.308] (==) Automatically adding GPU devices
[ 2020.308] (==) Automatically binding GPU devices
[ 2020.308] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 2020.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[ 2020.308] Entry deleted from font path.
[ 2020.308] (Run 'mkfontdir' on "/usr/share/fonts/misc").
[ 2020.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[ 2020.308] Entry deleted from font path.
[ 2020.308] (Run 'mkfontdir' on "/usr/share/fonts/TTF").
[ 2020.308] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 2020.308] Entry deleted from font path.
[ 2020.308] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 2020.308] Entry deleted from font path.
[ 2020.308] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 2020.308] Entry deleted from font path.
[ 2020.308] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 2020.308] Entry deleted from font path.
[ 2020.308] (==) FontPath set to:
[ 2020.308] (**) ModulePath set to "/usr/lib/nvidia,/usr/lib32/nvidia,/usr/lib32/nvidia/xorg/modules,/usr/lib32/xorg/modules,/usr/lib64/nvidia/xorg/modules,/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[ 2020.308] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2020.308] (II) Module ABI versions:
[ 2020.308] X.Org ANSI C Emulation: 0.4
[ 2020.308] X.Org Video Driver: 25.2
[ 2020.308] X.Org XInput driver : 24.4
[ 2020.308] X.Org Server Extension : 10.0
[ 2020.308] (++) using VT number 2
[ 2020.308] (--) controlling tty is VT number 2, auto-enabling KeepTty
[ 2020.309] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[ 2020.311] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2020.311] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 2020.311] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[ 2020.312] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 2020.312] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 2020.312] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 14 paused 0
[ 2020.314] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/nvidia,/usr/lib32/nvidia,/usr/lib32/nvidia/xorg/modules,/usr/lib32/xorg/modules,/usr/lib64/nvidia/xorg/modules,/usr/lib64/nvidia/xorg,/usr/lib64/xorg/modules"
[ 2020.315] (--) PCI:*(0@0:2:0) 8086:0166:17aa:21f4 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64, BIOS @ 0x????????/131072
[ 2020.315] (--) PCI: (1@0:0:0) 10de:0def:17aa:21f4 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 2020.315] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2020.315] (II) LoadModule: "glx"
[ 2020.315] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 2020.319] (II) Module glx: vendor="NVIDIA Corporation"
[ 2020.319] compiled for 4.0.2, module version = 1.0.0
[ 2020.319] Module class: X.Org Server Extension
[ 2020.319] (II) NVIDIA GLX Module 390.157 Wed Oct 12 09:19:15 UTC 2022
[ 2020.319] (II) LoadModule: "nvidia"
[ 2020.319] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 2020.319] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 2020.319] compiled for 4.0.2, module version = 1.0.0
[ 2020.319] Module class: X.Org Video Driver
[ 2020.319] (II) LoadModule: "modesetting"
[ 2020.319] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2020.344] (II) Module modesetting: vendor="X.Org Foundation"
[ 2020.344] compiled for 1.21.1.13, module version = 1.21.1
[ 2020.344] Module class: X.Org Video Driver
[ 2020.344] ABI class: X.Org Video Driver, version 25.2
[ 2020.344] (II) NVIDIA dlloader X Driver 390.157 Wed Oct 12 09:21:41 UTC 2022
[ 2020.344] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 2020.344] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2020.344] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 2020.344] (II) systemd-logind: releasing fd for 226:0
[ 2020.357] (II) Loading sub module "fb"
[ 2020.357] (II) LoadModule: "fb"
[ 2020.357] (II) Module "fb" already built-in
[ 2020.357] (II) Loading sub module "wfb"
[ 2020.357] (II) LoadModule: "wfb"
[ 2020.358] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 2020.358] (II) Module wfb: vendor="X.Org Foundation"
[ 2020.358] compiled for 1.21.1.13, module version = 1.0.0
[ 2020.358] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2020.358] (II) Loading sub module "ramdac"
[ 2020.358] (II) LoadModule: "ramdac"
[ 2020.358] (II) Module "ramdac" already built-in
[ 2020.358] (WW) Falling back to old probe method for modesetting
[ 2020.371] (II) modeset(G0): using drv /dev/dri/card1
[ 2020.371] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 2020.371] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 2020.371] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 2020.371] (==) NVIDIA(0): RGB weight 888
[ 2020.371] (==) NVIDIA(0): Default visual is TrueColor
[ 2020.371] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2020.371] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 2020.371] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 2020.371] (**) NVIDIA(0): Enabling 2D acceleration
[ 2020.372] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 2020.372] (--) NVIDIA(0): CRT-0
[ 2020.372] (--) NVIDIA(0): DFP-0
[ 2020.372] (--) NVIDIA(0): DFP-1
[ 2020.372] (--) NVIDIA(0): DFP-2
[ 2020.372] (--) NVIDIA(0): DFP-3
[ 2020.372] (--) NVIDIA(0): DFP-4
[ 2020.372] (--) NVIDIA(0): DFP-5
[ 2020.372] (--) NVIDIA(0): DFP-6
[ 2020.374] (II) NVIDIA(0): NVIDIA GPU NVS 5400M (GF108) at PCI:1:0:0 (GPU-0)
[ 2020.374] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 2020.374] (--) NVIDIA(0): VideoBIOS: 70.08.b7.05.01
[ 2020.374] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 2020.375] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 2020.375] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 2020.375] (--) NVIDIA(GPU-0):
[ 2020.377] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 2020.377] (--) NVIDIA(GPU-0): DFP-0: Internal LVDS
[ 2020.377] (--) NVIDIA(GPU-0): DFP-0: 330.0 MHz maximum pixel clock
[ 2020.377] (--) NVIDIA(GPU-0):
[ 2020.377] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 2020.377] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 2020.377] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 2020.377] (--) NVIDIA(GPU-0):
[ 2020.377] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 2020.377] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 2020.377] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 2020.377] (--) NVIDIA(GPU-0):
[ 2020.377] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 2020.377] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 2020.377] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 2020.377] (--) NVIDIA(GPU-0):
[ 2020.377] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 2020.377] (--) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 2020.377] (--) NVIDIA(GPU-0): DFP-4: 480.0 MHz maximum pixel clock
[ 2020.377] (--) NVIDIA(GPU-0):
[ 2020.378] (--) NVIDIA(GPU-0): DFP-5: disconnected
[ 2020.378] (--) NVIDIA(GPU-0): DFP-5: Internal DisplayPort
[ 2020.378] (--) NVIDIA(GPU-0): DFP-5: 480.0 MHz maximum pixel clock
[ 2020.378] (--) NVIDIA(GPU-0):
[ 2020.378] (--) NVIDIA(GPU-0): DFP-6: disconnected
[ 2020.378] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[ 2020.378] (--) NVIDIA(GPU-0): DFP-6: 480.0 MHz maximum pixel clock
[ 2020.378] (--) NVIDIA(GPU-0):
[ 2020.378] (==) NVIDIA(0):
[ 2020.378] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 2020.378] (==) NVIDIA(0): will be used as the requested mode.
[ 2020.378] (==) NVIDIA(0):
[ 2020.378] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[ 2020.378] (--) NVIDIA(0): AllowEmptyInitialConfiguration is enabled
[ 2020.378] (II) NVIDIA(0): Validated MetaModes:
[ 2020.378] (II) NVIDIA(0): "NULL"
[ 2020.378] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 2020.378] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 2020.378] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 2020.378] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 2020.378] (**) modeset(G0): Option "AccelMethod" "none"
[ 2020.378] (==) modeset(G0): RGB weight 888
[ 2020.378] (==) modeset(G0): Default visual is TrueColor
[ 2020.378] (**) modeset(G0): glamor disabled
[ 2020.378] (II) modeset(G0): ShadowFB: preferred YES, enabled YES
[ 2020.378] (II) modeset(G0): Double-buffered shadow updates: off
[ 2020.378] (II) modeset(G0): Output LVDS-1-1 has no monitor section
[ 2020.379] (II) modeset(G0): Output VGA-1-1 has no monitor section
[ 2020.380] (II) modeset(G0): EDID for output LVDS-1-1
[ 2020.380] (II) modeset(G0): Manufacturer: CMN Model: 1471 Serial#: 0
[ 2020.380] (II) modeset(G0): Year: 2011 Week: 35
[ 2020.380] (II) modeset(G0): EDID Version: 1.3
[ 2020.380] (II) modeset(G0): Digital Display Input
[ 2020.380] (II) modeset(G0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 2020.380] (II) modeset(G0): Gamma: 2.20
[ 2020.380] (II) modeset(G0): No DPMS capabilities specified
[ 2020.380] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2020.380] (II) modeset(G0): First detailed timing is preferred mode
[ 2020.380] (II) modeset(G0): redX: 0.608 redY: 0.349 greenX: 0.340 greenY: 0.556
[ 2020.380] (II) modeset(G0): blueX: 0.169 blueY: 0.137 whiteX: 0.313 whiteY: 0.329
[ 2020.380] (II) modeset(G0): Manufacturer's mask: 0
[ 2020.380] (II) modeset(G0): Supported detailed timing:
[ 2020.380] (II) modeset(G0): clock: 69.3 MHz Image Size: 309 x 174 mm
[ 2020.380] (II) modeset(G0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1466 h_border: 0
[ 2020.380] (II) modeset(G0): v_active: 768 v_sync: 769 v_sync_end 773 v_blanking: 788 v_border: 0
[ 2020.380] (II) modeset(G0): N140BGE-L32
[ 2020.380] (II) modeset(G0): CMN
[ 2020.380] (II) modeset(G0): N140BGE-L32
[ 2020.380] (II) modeset(G0): EDID (in hex):
[ 2020.380] (II) modeset(G0): 00ffffffffffff000dae711400000000
[ 2020.380] (II) modeset(G0): 23150103801f11780ad1459b59578e2b
[ 2020.380] (II) modeset(G0): 23505400000001010101010101010101
[ 2020.380] (II) modeset(G0): 010101010101121b5664500014303020
[ 2020.380] (II) modeset(G0): 140035ae10000018000000fe004e3134
[ 2020.380] (II) modeset(G0): 304247452d4c33320a20000000fe0043
[ 2020.380] (II) modeset(G0): 4d4e0a202020202020202020000000fe
[ 2020.380] (II) modeset(G0): 004e3134304247452d4c33320a200009
[ 2020.380] (II) modeset(G0): Printing probed modes for output LVDS-1-1
[ 2020.380] (II) modeset(G0): Modeline "1366x768"x60.0 69.30 1366 1414 1446 1466 768 769 773 788 -hsync -vsync (47.3 kHz eP)
[ 2020.380] (II) modeset(G0): Modeline "1280x720"x120.0 156.12 1280 1376 1512 1744 720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1280x720"x120.0 120.75 1280 1304 1320 1360 720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1280x720"x59.9 74.50 1280 1344 1472 1664 720 723 728 748 -hsync +vsync (44.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x576"x119.9 98.50 1024 1092 1200 1376 576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x576"x119.9 78.38 1024 1048 1064 1104 576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x600"x119.9 96.62 960 1028 1128 1296 600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x540"x119.9 86.50 960 1024 1124 1288 540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "800x450"x119.9 59.12 800 848 928 1056 450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "800x450"x119.6 48.75 800 824 840 880 450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "700x450"x119.9 51.75 700 740 812 924 450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "700x450"x119.8 43.25 700 724 740 780 450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "684x384"x119.8 42.62 684 720 788 892 384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "684x384"x119.7 36.12 684 708 724 764 384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x400"x119.8 41.75 640 676 740 840 400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x400"x120.0 35.50 640 664 680 720 400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x360"x119.7 37.25 640 672 736 832 360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x360"x119.7 31.88 640 664 680 720 360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "512x288"x120.0 23.25 512 532 580 648 288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "512x288"x119.8 21.00 512 536 552 592 288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "480x270"x119.3 20.38 480 496 544 608 270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "480x270"x119.6 18.62 480 504 520 560 270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "432x243"x119.8 16.25 432 444 484 536 243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "432x243"x119.1 15.25 432 456 472 512 243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "360x202"x119.0 11.25 360 372 404 448 202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "360x202"x118.3 10.88 360 384 400 440 202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "320x180"x119.7 9.00 320 332 360 400 180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[ 2020.380] (II) modeset(G0): Modeline "320x180"x118.6 8.88 320 344 360 400 180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[ 2020.382] (II) modeset(G0): EDID for output VGA-1-1
[ 2020.382] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 2020.382] (==) modeset(G0): DPI set to (96, 96)
[ 2020.382] (II) Loading sub module "fb"
[ 2020.382] (II) LoadModule: "fb"
[ 2020.382] (II) Module "fb" already built-in
[ 2020.382] (II) Loading sub module "shadow"
[ 2020.382] (II) LoadModule: "shadow"
[ 2020.382] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 2020.382] (II) Module shadow: vendor="X.Org Foundation"
[ 2020.382] compiled for 1.21.1.13, module version = 1.1.0
[ 2020.382] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2020.382] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[ 2020.382] (II) NVIDIA: access.
[ 2020.385] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 2020.385] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 2020.385] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 2020.385] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 2020.385] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 2020.385] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 2020.385] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 2020.385] (II) NVIDIA(0): Config Options in the README.
[ 2020.405] (II) NVIDIA(0): Setting mode "NULL"
[ 2020.410] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 2020.410] (==) NVIDIA(0): Backing store enabled
[ 2020.410] (==) NVIDIA(0): Silken mouse enabled
[ 2020.410] (==) NVIDIA(0): DPMS enabled
[ 2020.410] (II) Loading sub module "dri2"
[ 2020.410] (II) LoadModule: "dri2"
[ 2020.410] (II) Module "dri2" already built-in
[ 2020.410] (II) NVIDIA(0): [DRI2] Setup complete
[ 2020.410] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 2020.410] (==) modeset(G0): Backing store enabled
[ 2020.410] (==) modeset(G0): Silken mouse enabled
[ 2020.435] (II) modeset(G0): Initializing kms color map for depth 24, 8 bpc.
[ 2020.435] (==) modeset(G0): DPMS enabled
[ 2020.435] (EE)
[ 2020.435] (EE) Backtrace:
[ 2020.435] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 2020.435] (EE) 0: /usr/lib/Xorg (?+0x0) [0x617b13dcdced]
[ 2020.436] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 2020.436] (EE) 1: /usr/lib/libc.so.6 (?+0x0) [0x73b65331e1d0]
[ 2020.436] (EE) 2: /usr/lib/Xorg (InitOutput+0x5b1) [0x617b13df1b11]
[ 2020.436] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 2020.436] (EE) 3: /usr/lib/Xorg (?+0x0) [0x617b13cb9f93]
[ 2020.436] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 2020.436] (EE) 4: /usr/lib/libc.so.6 (?+0x0) [0x73b653306e08]
[ 2020.437] (EE) 5: /usr/lib/libc.so.6 (__libc_start_main+0x8c) [0x73b653306ecc]
[ 2020.437] (EE) 6: /usr/lib/Xorg (_start+0x25) [0x617b13cbb5c5]
[ 2020.437] (EE)
[ 2020.437] (EE) Segmentation fault at address 0x10
[ 2020.437] (EE)
Fatal server error:
[ 2020.437] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 2020.437] (EE)
[ 2020.437] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2020.437] (EE) Please also check the log file at "/home/imax/.local/share/xorg/Xorg.0.log" for additional information.
[ 2020.437] (EE)
[ 2020.470] (EE) Server terminated with error (1). Closing log file.
Конфиг nvidia:
Section "Files"
ModulePath "/usr/lib/nvidia"
ModulePath "/usr/lib32/nvidia"
ModulePath "/usr/lib32/nvidia/xorg/modules"
ModulePath "/usr/lib32/xorg/modules"
ModulePath "/usr/lib64/nvidia/xorg/modules"
ModulePath "/usr/lib64/nvidia/xorg"
ModulePath "/usr/lib64/xorg/modules"
EndSection
Section "ServerLayout"
Identifier "layout"
Screen 1 "nvidia"
Inactive "intel"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:01:00:0"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
# Option "AllowEmptyInitialConfiguration" "Yes"
# Option "UseDisplayDevice" "none"
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
Option "AccelMethod" "none"
EndSection
Section "Screen"
Identifier "intel"
Device "intel"
EndSection
Почему xorg сегфолтится?
Подмена html тегов markdown на свои в django
Добрый день ЛОР. Ткните кто нибудь носом где реализовывается подмена html кода? Допустим имея стандартную разметку markdown:
<ul>
<li></li>
<li></li>
</ul>
подменять ее на свою типа:
<ul class='my_ul_class'>
<li class='my_li_class'><i class='my_i_class'></i></li>
<li class='my_li_class'><i class='my_i_class'></i></li>
</ul>
Задача на python
Доброй ночи ЛОР. Прошу помощи реализовать одну задачу:
Есть число, пускай будет 4. Нужно из числа 4 сделать 4 любых символа. Что бы 4 = 1234.
Как len(), только в обратном порядке.
Перемещено leave из talks
Шифрование всего диска archlinux. Не могу привязать ключ.
Добрый день ЛОР.
Сабж. При загрузке просит пароль (так и должно быть), далее в процессе загрузки initramfs не может найти ключ, и просит еще раз ввести пароль от контейнера.
В mkinitcpio.conf в разделе FILES указан путь до ключа.
Проблема с bumblebee
Доброго веремени суток ЛОР. Проблема следующая : При запуске optirun или primusrun приложения отрисовываются через встроеную карту intel а не nvidia.
optirun -vv glxinfo | grep OpenGL
[20113.033823] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[20113.034173] [INFO]Configured driver: nvidia
[20113.055278] [DEBUG]optirun version 3.2.1-2021-01-12-Format:%h$ starting...
[20113.055318] [DEBUG]Active configuration:
[20113.055333] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[20113.055342] [DEBUG] X display: :8
[20113.055353] [DEBUG] LD_LIBRARY_PATH: /usr/lib64/extensions/nvidia:/usr/lib64:/usr/lib
[20113.055366] [DEBUG] Socket path: /var/run/bumblebee.socket
[20113.055376] [DEBUG] Accel/display bridge: primus
[20113.055386] [DEBUG] VGL Compression: jpeg
[20113.055396] [DEBUG] VGLrun extra options:
[20113.055409] [DEBUG] Primus LD Path: /usr/lib64/primus:/usr/lib/primus:/usr/lib64:/usr/lib
[20114.381122] [INFO]Response: Yes. X is active.
[20114.381148] [INFO]Running application using primus.
[20114.381460] [DEBUG]Process glxinfo started, PID 8251.
OpenGL vendor string: Intel
OpenGL renderer string: Mesa Intel(R) HD Graphics 4000 (IVB GT2)
OpenGL core profile version string: 4.2 (Core Profile) Mesa 24.0.7
OpenGL core profile shading language version string: 4.20
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 4.2 (Compatibility Profile) Mesa 24.0.7
OpenGL shading language version string: 4.20
OpenGL context flags: (none)
OpenGL profile mask: compatibility profile
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 24.0.7
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00
OpenGL ES profile extensions:
[20114.493554] [DEBUG]SIGCHILD received, but wait failed with No child processes
[20114.493582] [DEBUG]Socket closed.
[20114.493618] [DEBUG]Killing all remaining processes.
Перемещено hobbit из general
kbdd для hyprland
Привет ЛОР. Сабж. Перебрался bspwm на hyprland, теперь голову ломаю как раскладку привязать к окну.
Пробросить физический usb порт в гостевую ОС virtualbox
Добрый день ЛОР. Сабж. Возможно ли вообще такое? Мне гостевая система нужна для прошивки окирпиченого девайса. Проброс устройств не предлагать.
Как изменить цвет фона tty?
Добрый день лор. Сабж.
Проблемы с разрешением plymouth
Привет лор! Сабж. Готовил все по стандарту, но разрешение сплеша при загрузке слишком низкое. Ниже конфиги. Заранее благодарен.
# GRUB boot loader configuration
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet rd.luks.name=da754ec6-92c5-4b59-a930-4e477bf599e7=cryptlvm root=/dev/vg0/root splash udev.log_priority=3"
GRUB_CMDLINE_LINUX=""
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable booting from LUKS encrypted devices
#GRUB_ENABLE_CRYPTODISK=y
# Set to 'countdown' or 'hidden' to change timeout behavior,
# press ESC key to display menu.
GRUB_TIMEOUT_STYLE=menu
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `videoinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
# Uncomment to make GRUB remember the last selection. This requires
# setting 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT=true
# Uncomment to disable submenus in boot menu
#GRUB_DISABLE_SUBMENU=y
# Probing for other operating systems is disabled for security reasons. Read
# documentation on GRUB_DISABLE_OS_PROBER, if still want to enable this
# functionality install os-prober and uncomment to detect and include other
# operating systems.
#GRUB_DISABLE_OS_PROBER=false
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES=(usbhid xhci_hcd)
MODULES=()
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=()
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
FILES=()
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No RAID, lvm2, or encrypted root is needed.
# HOOKS=(base)
#
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS=(base udev autodetect modconf block filesystems fsck)
#
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS=(base udev modconf block filesystems fsck)
#
## This setup assembles a mdadm array with an encrypted root file system.
## Note: See 'mkinitcpio -H mdadm_udev' for more information on RAID devices.
# HOOKS=(base udev modconf keyboard keymap consolefont block mdadm_udev encrypt filesystems fsck)
#
## This setup loads an lvm2 volume group.
# HOOKS=(base udev modconf block lvm2 filesystems fsck)
#
## NOTE: If you have /usr on a separate partition, you MUST include the
# usr and fsck hooks.
#HOOKS=(base udev autodetect modconf kms keyboard keymap consolefont block encrypt lvm2 filesystems fsck)
#HOOKS=(base systemd plymouth autodetect modconf kms keyboard sd-vconsole block sd-encrypt lvm2 filesystems fsck)
#HOOKS=(base udev autodetect kms modconf block keyboard keymap consolefont plymouth encrypt lvm2 filesystems fsck)
HOOKS=(base systemd plymouth autodetect modconf kms keyboard sd-vconsole block sd-encrypt lvm2 filesystems fsck)
# COMPRESSION
# Use this to compress the initramfs image. By default, zstd compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="zstd"
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=()
# MODULES_DECOMPRESS
# Decompress kernel modules during initramfs creation.
# Enable to speedup boot process, disable to save RAM
# during early userspace. Switch (yes/no).
#MODULES_DECOMPRESS="yes"
Есть ли для linux бесплатные pdf редакторы?
Существуют ли такие? Без накладки логотипа при сохранении.
Как заставить thunderbird загружать более 1000 писем по imap?
Сабж.
polybar отсутствует команда polybar-msg
Привет ЛОР.
Сабж. Мне нужна эта команда для того чтоб скрывать панель.
bspwm убрать скругление окон
Добрый день ЛОР.
Сабж. По умолчанию включено скругление.
Какой профит от миграции с udev на eudev в gentoo?
Сабж.
i3lock wrong password
Здравствуй ЛОР. Ситуация следующая: После переноса системы на другой носитель i3lock перестал принимать пароль. Пароль заведомо правильный ввожу. В debug нет ничего странного. Начитавшись форумов советуют решить это chmod +r /etc/shadow. Присвоив права чтения всем блокировщик работает адекватно, но не считаю это правильным решением. Мож у кого какие мысли будут?
pcmanfm не работаетcopy --> paste
Сабж. Ctrl+C –> Ctrl+V работает. Средсвами меню нет.
Поделитесь кто нить рабочим ebuild splashutils
Сабж
Поделитесь успешным опытом использования connman как bluetooth менеджер
Сабж
| следующие → |