~ $ sudo emerge -av qterminal
Пароль: 

These are the packages that would be merged, in order:

Calculating dependencies -

!!! Problem resolving dependencies for x11-terms/qterminal
... done!

!!! The ebuild selected to satisfy "qterminal" has unmet requirements.
- x11-terms/qterminal-0.6.0::gentoo USE="qt4 qt5 -debug" ABI_X86="64"

  The following REQUIRED_USE flag constraints are unsatisfied:
    exactly-one-of ( qt4 qt5 )

lxqt-base/lxqt-globalkeys-9999::qt

$ sudo emerge -av lxqt-base/lxqt-meta
Пароль: 

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild     U *] lxqt-base/lxqt-globalkeys-9999::qt [0.9.0::gentoo] 0 KiB
[ebuild     U *] lxqt-base/lxqt-qtplugin-9999::qt [0.9.0::gentoo] 0 KiB
[ebuild     U *] lxqt-base/lxqt-config-9999::qt [0.9.0::gentoo] 0 KiB
[ebuild     U *] lxqt-base/lxqt-about-9999::qt [0.9.0::gentoo] 0 KiB
[ebuild     U *] lxqt-base/lxqt-runner-9999::qt [0.9.0::gentoo] 0 KiB
[ebuild     U *] lxqt-base/lxqt-common-9999::qt [0.9.1::gentoo] 0 KiB
[ebuild     U *] lxqt-base/lxqt-session-9999::qt [0.9.0-r1::gentoo] 0 KiB
[ebuild     U *] lxqt-base/lxqt-notificationd-9999::qt [0.9.0-r1::gentoo] 0 KiB
[ebuild     U *] lxqt-base/lxqt-policykit-9999::qt [0.9.0::gentoo] 0 KiB
[ebuild     U *] lxqt-base/liblxqt-mount-9999::qt [0.9.0::gentoo] USE="udisks" 0 KiB
[ebuild     U *] lxqt-base/lxqt-panel-9999::qt [0.9.0::gentoo] USE="alsa clock desktopswitch kbindicator mainmenu mount quicklaunch showdesktop taskbar tray volume -colorpicker -cpuload -dom -networkmonitor -pulseaudio -screensaver -sensors -sysstat -worldclock" 0 KiB
[ebuild     U *] x11-misc/pcmanfm-qt-9999::qt [0.9.0::gentoo] 0 KiB
[ebuild     U *] lxqt-base/lxqt-meta-9999::qt [0.9.0-r2::gentoo] USE="filemanager icons (policykit) -admin -lightdm -lximage -minimal -powermanagement -sddm -ssh-askpass (-oxygen%*)" 0 KiB

Total: 13 packages (13 upgrades), Size of downloads: 0 KiB

Would you like to merge these packages? [Yes/No] y

>>> Verifying ebuild manifests

>>> Emerging (1 of 13) lxqt-base/lxqt-globalkeys-9999::qt
>>> Unpacking source...
 * Fetching git://git.lxde.org/git/lxde/lxqt-globalkeys.git ...
git fetch git://git.lxde.org/git/lxde/lxqt-globalkeys.git +HEAD:refs/git-r3/HEAD
git symbolic-ref refs/git-r3/lxqt-base/lxqt-globalkeys/0/__main__ refs/heads/master
 * Checking out git://git.lxde.org/git/lxde/lxqt-globalkeys.git to /var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999 ...
git checkout --quiet master
GIT update -->
   repository:               git://git.lxde.org/git/lxde/lxqt-globalkeys.git
   at the commit:            2693406dc16972b506a9b3db5b20bf0617a8761d
>>> Source unpacked in /var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work
>>> Preparing source in /var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999 ...
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999 ...
>>> Working in BUILD_DIR: "/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999_build"
 * Declaring mycmakeargs as a variable is deprecated. Please use an array instead.
cmake --no-warn-unused-cli -C /var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999_build/gentoo_common_config.cmake -G Unix Makefiles -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Gentoo -DCMAKE_INSTALL_DO_STRIP=OFF -DCMAKE_USER_MAKE_RULES_OVERRIDE=/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999_build/gentoo_rules.cmake -DCMAKE_TOOLCHAIN_FILE=/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999_build/gentoo_toolchain.cmake  /var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999
Not searching for unused variables given on the command line.
loading initial cache file /var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999_build/gentoo_common_config.cmake
-- The C compiler identification is GNU 4.9.3
-- The CXX compiler identification is GNU 4.9.3
-- Check for working C compiler: /usr/bin/x86_64-pc-linux-gnu-gcc
-- Check for working C compiler: /usr/bin/x86_64-pc-linux-gnu-gcc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/x86_64-pc-linux-gnu-g++
-- Check for working CXX compiler: /usr/bin/x86_64-pc-linux-gnu-g++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:28 (include):
  include could not find load file:

    LXQtCompilerSettings


-- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so
-- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so - found
-- Looking for gethostbyname
-- Looking for gethostbyname - found
-- Looking for connect
-- Looking for connect - found
-- Looking for remove
-- Looking for remove - found
-- Looking for shmat
-- Looking for shmat - found
-- Looking for IceConnectionNumber in ICE
-- Looking for IceConnectionNumber in ICE - found
-- Found X11: /usr/lib64/libX11.so
CMake Error at daemon/CMakeLists.txt:145 (lxqt_enable_target_exceptions):
  Unknown CMake command "lxqt_enable_target_exceptions".


-- Configuring incomplete, errors occurred!
See also "/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999_build/CMakeFiles/CMakeOutput.log".
 * ERROR: lxqt-base/lxqt-globalkeys-9999::qt failed (configure phase):
 *   cmake failed
 * 
 * Call stack:
 *     ebuild.sh, line   93:  Called src_configure
 *   environment, line 3376:  Called cmake-utils_src_configure
 *   environment, line  931:  Called _execute_optionally 'src_configure'
 *   environment, line  294:  Called enable_cmake-utils_src_configure
 *   environment, line 1274:  Called die
 * The specific snippet of code:
 *       "${CMAKE_BINARY}" "${cmakeargs[@]}" "${CMAKE_USE_DIR}" || die "cmake failed";
 * 
 * If you need support, post the output of `emerge --info '=lxqt-base/lxqt-globalkeys-9999::qt'`,
 * the complete build log and the output of `emerge -pqv '=lxqt-base/lxqt-globalkeys-9999::qt'`.
 * The complete build log is located at '/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/temp/environment'.
 * Working directory: '/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999_build'
 * S: '/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999'

>>> Failed to emerge lxqt-base/lxqt-globalkeys-9999, Log file:

>>>  '/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/temp/build.log'

 * Messages for package lxqt-base/lxqt-globalkeys-9999:

 * ERROR: lxqt-base/lxqt-globalkeys-9999::qt failed (configure phase):
 *   cmake failed
 * 
 * Call stack:
 *     ebuild.sh, line   93:  Called src_configure
 *   environment, line 3376:  Called cmake-utils_src_configure
 *   environment, line  931:  Called _execute_optionally 'src_configure'
 *   environment, line  294:  Called enable_cmake-utils_src_configure
 *   environment, line 1274:  Called die
 * The specific snippet of code:
 *       "${CMAKE_BINARY}" "${cmakeargs[@]}" "${CMAKE_USE_DIR}" || die "cmake failed";
 * 
 * If you need support, post the output of `emerge --info '=lxqt-base/lxqt-globalkeys-9999::qt'`,
 * the complete build log and the output of `emerge -pqv '=lxqt-base/lxqt-globalkeys-9999::qt'`.
 * The complete build log is located at '/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/temp/environment'.
 * Working directory: '/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999_build'
 * S: '/var/tmp/portage/lxqt-base/lxqt-globalkeys-9999/work/lxqt-globalkeys-9999'

~ $ sudo echo "source /var/lib/layman/make.conf" >> /etc/portage/make.conf
bash: /etc/portage/make.conf: Отказано в доступе

~ $ cat /etc/portage/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-march=k8 -O2 -pipe"
MAKEOPTS="-j5"
CXXFLAGS="${CFLAGS}"

# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="x86_64-pc-linux-gnu"

# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
USE="infinality consolekit gtk X qt4 qt5 bindist mmx sse sse2 dbus polkit udisk"
CPU_FLAGS_X86="aes avx mmx mmxext popcnt sse sse2 sse3 sse4_1 sse4_2 ssse3"

PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
PKGDIR="${PORTDIR}/packages"
VIDEO_CARDS="nvidia"
LINGUAS="ru"
INPUT_DEVICES="evdev"
PORTDIR_OVERLAY="${PORTDIR_OVERLAY}"

!!! Multiple package instances within a single package slot have been pulled
!!! into the dependency graph, resulting in a slot conflict:

dev-libs/libxml2:2

  (dev-libs/libxml2-2.9.2-r1:2/2::gentoo, ebuild scheduled for merge) pulled in by
    dev-libs/libxml2:=[icu] required by (www-client/chromium-46.0.2490.71:0/0::gentoo, ebuild scheduled for merge)
                       ^^^                                                                                                                            

  (dev-libs/libxml2-2.9.2-r1:2/2::gentoo, installed) pulled in by
    dev-libs/libxml2:2[!icu?,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,
abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] 
required by (dev-qt/qtwebkit-4.8.6-r1:4/4::gentoo, installed)
                       ^^^^^                                                   

/etc/portage/package.accept_keywords

kde-apps/konsole