SELECT DATE(t1.starttime) AS day, sum(t1.sessiontime) AS calltime,
sum(t1.sessionbill) AS cost, count(*) as nbcall,
sum(t1.buycost) AS buy, sum(case when t1.sessiontime>0 then
1 else 0 end) as success_calls
FROM cc_call t1 LEFT OUTER JOIN cc_trunk t3 ON
t1.id_trunk = t3.id_trunk
LEFT OUTER JOIN cc_ratecard t4 ON t1.id_ratecard = t4.id
WHERE t1.starttime >= ('2017-12-1') AND t1.starttime <=
('2017-12-31 23:59:59')
AND (t1.terminatecauseid=1) GROUP BY day ORDER BY day;

emerge --ask --changed-use --deep @world

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R    ] virtual/libintl-0-r2  ABI_X86="32*" 
[ebuild   R    ] sys-libs/ncurses-6.0-r1  USE="-gpm*" ABI_X86="32*" 
[ebuild   R    ] app-arch/bzip2-1.0.6-r8  ABI_X86="32*" 
[ebuild   R    ] virtual/libiconv-0-r2  ABI_X86="32*" 
[ebuild   R    ] dev-libs/lzo-2.09  ABI_X86="32*" 
[ebuild  N     ] dev-db/lmdb-0.9.18  USE="-static-libs" 
[ebuild  N     ] sys-libs/libutempter-1.1.6-r2  USE="-static-libs" 
[ebuild   R    ] sys-libs/zlib-1.2.11-r1  ABI_X86="32*" 
[ebuild   R    ] dev-libs/gmp-6.1.2  ABI_X86="32*" 
[ebuild   R    ] dev-libs/libunistring-0.9.7  ABI_X86="32*" 
[ebuild   R    ] dev-libs/libffi-3.2.1  ABI_X86="32*" 
[ebuild   R    ] media-libs/libpng-1.6.29  ABI_X86="32*" 
[ebuild   R    ] virtual/libffi-3.0.13-r1  ABI_X86="32*" 
[ebuild   R    ] media-libs/libjpeg-turbo-1.5.1  ABI_X86="32*" 
[ebuild   R    ] virtual/jpeg-0-r2  ABI_X86="32*" 
[ebuild   R    ] dev-libs/openssl-1.0.2n  ABI_X86="32*" 
[ebuild     U  ] net-misc/iputils-20171016_pre [20151218] USE="openssl%* -nettle%" 
[ebuild     U  ] dev-libs/expat-2.2.5 [2.2.1] ABI_X86="32*" 
[ebuild   R    ] media-libs/tiff-4.0.8  ABI_X86="32*" 
[ebuild   R    ] dev-libs/nspr-4.13.1  ABI_X86="32*" 
[ebuild   R    ] dev-libs/nettle-3.3-r2  ABI_X86="32*" 
[ebuild   R    ] media-libs/alsa-lib-1.1.2  ABI_X86="32*" 
[ebuild  N     ] app-arch/lz4-1.7.5-r1  USE="-static-libs" ABI_X86="(64) -32 (-x32)" 
[ebuild   R    ] media-gfx/graphite2-1.3.10  ABI_X86="32*" 
[ebuild   R    ] media-libs/openal-1.15.1-r2  ABI_X86="32*" 
[ebuild   R    ] dev-libs/libtasn1-4.12-r1  ABI_X86="32*" 
[ebuild   R    ] net-dns/libidn2-2.0.4  ABI_X86="32*" 
[ebuild   R    ] dev-libs/newt-0.52.15  USE="-gpm*" 
[ebuild   R    ] x11-proto/xproto-7.0.31  ABI_X86="32*" 
[ebuild   R    ] x11-proto/xextproto-7.3.0  ABI_X86="32*" 
[ebuild   R    ] sys-libs/readline-6.3_p8-r3  ABI_X86="32*" 
[ebuild   R    ] dev-db/sqlite-3.20.1-r1  ABI_X86="32*" 
[ebuild   R    ] media-libs/freetype-2.8  ABI_X86="32*" 
[ebuild   R    ] media-libs/fontconfig-2.12.4  ABI_X86="32*" 
[ebuild   R    ] sys-apps/attr-2.4.47-r2  ABI_X86="32*" 
[ebuild   R    ] sys-libs/libcap-2.24-r2  ABI_X86="32*" 
[ebuild   R    ] dev-libs/libxml2-2.9.6  ABI_X86="32*" 
[ebuild   R    ] sys-devel/gettext-0.19.8.1  ABI_X86="32*" 
[ebuild  NS    ] app-text/docbook-xml-dtd-4.5-r1 [4.1.2-r6, 4.2-r2, 4.3-r1, 4.4-r2]
[ebuild   R    ] dev-libs/libgpg-error-1.27-r1  ABI_X86="32*" 
[ebuild   R    ] sys-libs/binutils-libs-2.29.1-r1  ABI_X86="32*" 
[ebuild   R    ] dev-libs/libgcrypt-1.8.1  ABI_X86="32*" 
[ebuild   R    ] x11-proto/inputproto-2.3.2  ABI_X86="32*" 
[ebuild   R    ] x11-proto/kbproto-1.0.7  ABI_X86="32*" 
[ebuild   R    ] x11-proto/renderproto-0.11.1-r1  ABI_X86="32*" 
[ebuild   R    ] dev-libs/libpcre-8.41-r1  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXdmcp-1.1.2-r1  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXau-1.0.8  ABI_X86="32*" 
[ebuild   R    ] x11-proto/damageproto-1.2.1-r1  ABI_X86="32*" 
[ebuild   R    ] net-nds/openldap-2.4.44  USE="-minimal*" ABI_X86="32*" 
[ebuild   R    ] x11-libs/pixman-0.34.0  ABI_X86="32*" 
[ebuild   R    ] dev-libs/icu-58.2-r1  ABI_X86="32*" 
[ebuild   R    ] x11-proto/xf86vidmodeproto-2.3.1-r1  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libpciaccess-0.13.4  ABI_X86="32*" 
[ebuild   R    ] x11-proto/xcb-proto-1.12-r2  ABI_X86="32*" 
[ebuild   R    ] x11-proto/randrproto-1.5.0  ABI_X86="32*" 
[ebuild   R    ] dev-libs/libpthread-stubs-0.4  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libxcb-1.12-r2  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libdrm-2.4.88  ABI_X86="32*" 
[ebuild   R    ] x11-proto/compositeproto-0.4.2-r1  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libxshmfence-1.2  ABI_X86="32*" 
[ebuild   R    ] x11-proto/fixesproto-5.0-r1  ABI_X86="32*" 
[ebuild   R    ] sys-devel/llvm-4.0.1-r1  ABI_X86="32*" 
[ebuild   R    ] x11-proto/xf86bigfontproto-1.2.0-r1  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libX11-1.6.5  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXext-1.3.3  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXrender-0.9.10  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXfixes-5.0.3  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXi-1.7.9  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXrandr-1.5.1  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXft-2.3.2  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXdamage-1.1.4-r1  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXcursor-1.1.15  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXcomposite-0.4.4-r1  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXxf86vm-1.1.4  ABI_X86="32*" 
[ebuild   R    ] x11-proto/dri2proto-2.8-r1  ABI_X86="32*" 
[ebuild   R    ] x11-proto/glproto-1.4.17-r1  ABI_X86="32*" 
[ebuild   R    ] x11-proto/dri3proto-1.0  ABI_X86="32*" 
[ebuild   R    ] x11-proto/xf86driproto-2.1.1-r1  ABI_X86="32*" 
[ebuild   R    ] x11-proto/presentproto-1.1  ABI_X86="32*" 
[ebuild   R    ] media-libs/mesa-17.2.7  USE="gles2*" ABI_X86="32*" 
[ebuild   R    ] media-libs/libtxc_dxtn-1.0.1-r1  ABI_X86="32*" 
[ebuild   R    ] x11-proto/scrnsaverproto-1.2.2-r1  ABI_X86="32*" 
[ebuild   R    ] x11-libs/libXScrnSaver-1.2.2-r1  ABI_X86="32*" 
[ebuild  N     ] x11-apps/xclock-1.0.7 
[ebuild  N     ] x11-apps/xsm-1.0.3  USE="-rsh" 
[ebuild  N     ] x11-wm/twm-1.0.9 
[ebuild  N     ] x11-apps/xmessage-1.0.4 
[ebuild  N     ] x11-apps/luit-1.1.1 
[ebuild  N     ] media-fonts/font-alias-1.0.3-r1 
[ebuild  N     ] x11-libs/libXfont-1.5.4  USE="bzip2 ipv6 truetype -doc -static-libs" 
[ebuild  N     ] x11-apps/bdftopcf-1.0.5 
[ebuild  N     ] media-fonts/font-misc-misc-1.1.2-r1  USE="X nls" 
[ebuild  N     ] x11-terms/xterm-327  USE="openpty truetype unicode -Xaw3d -toolbar -xinerama" 
[ebuild   R    ] www-client/w3m-0.5.3-r9  USE="-gpm*" 
[ebuild   R    ] sys-apps/util-linux-2.30.2  ABI_X86="32*" 
[ebuild  N     ] sys-fs/udev-233  USE="acl kmod (-selinux)" ABI_X86="32 (64) (-x32)" 
[ebuild   R    ] virtual/libudev-232  ABI_X86="32*" 
[ebuild   R    ] dev-libs/glib-2.50.3-r1  ABI_X86="32*" 
[ebuild   R    ] dev-util/pkgconfig-0.29.2  ABI_X86="32*" 
[ebuild   R    ] virtual/pkgconfig-0-r1  ABI_X86="32*" 
[ebuild   R    ] x11-libs/cairo-1.14.8  ABI_X86="32*" 
[ebuild   R    ] x11-libs/gdk-pixbuf-2.36.10-r2  ABI_X86="32*" 
[ebuild   R    ] net-misc/curl-7.57.0  ABI_X86="32*" 
[ebuild   R    ] dev-libs/atk-2.22.0  ABI_X86="32*" 
[ebuild   R    ] net-libs/gnutls-3.5.15  ABI_X86="32*" 
[ebuild   R    ] dev-libs/libcroco-0.6.12-r1  ABI_X86="32*" 
[ebuild   R    ] dev-libs/nss-3.29.5  ABI_X86="32*" 
[ebuild   R    ] x11-apps/xinit-1.3.4-r3  USE="-minimal*" 
[ebuild   R    ] app-misc/mc-4.8.18-r1  USE="-gpm*" 
[ebuild   R    ] media-libs/harfbuzz-1.7.2  ABI_X86="32*" 
[ebuild   R    ] x11-libs/pango-1.40.12  ABI_X86="32*" 
[ebuild   R    ] gnome-base/librsvg-2.40.18  ABI_X86="32*" 
[ebuild  N     ] sys-apps/systemd-233-r6  USE="acl gcrypt kmod lz4 pam policykit seccomp ssl (-apparmor) -audit -build -cryptsetup -curl -doc -elfutils -gnuefi -http -idn -importd -lzma -nat -qrcode (-selinux) -sysv-utils {-test} -vanilla -xkb" ABI_X86="(64) -32 (-x32)" 
[ebuild   R    ] sys-apps/dbus-1.10.18  USE="systemd*" ABI_X86="32*" 
[ebuild  N     ] sys-apps/gentoo-systemd-integration-7 
[ebuild   R    ] net-print/cups-2.1.4  ABI_X86="32*" 
[ebuild   R    ] sys-auth/pambase-20150213-r1  USE="systemd*" 
[ebuild  N     ] gnome-extra/nm-applet-1.8.6  USE="introspection modemmanager -gcr (-selinux) -teamd" 
[ebuild   R    ] x11-libs/gtk+-2.24.31-r1  ABI_X86="32*" 
[blocks B      ] sys-fs/eudev ("sys-fs/eudev" is blocking sys-apps/systemd-233-r6, sys-apps/gentoo-systemd-integration-7)
[blocks B      ] sys-apps/systemd ("sys-apps/systemd" is blocking sys-fs/udev-233)
[blocks B      ] sys-fs/udev ("sys-fs/udev" is blocking sys-fs/eudev-3.1.5)
[blocks B      ] sys-apps/systemd ("sys-apps/systemd" is blocking sys-fs/eudev-3.1.5)
[blocks B      ] sys-fs/udev ("sys-fs/udev" is blocking sys-apps/systemd-233-r6, sys-apps/gentoo-systemd-integration-7)
[blocks B      ] sys-apps/gentoo-systemd-integration ("sys-apps/gentoo-systemd-integration" is blocking sys-fs/eudev-3.1.5)
[blocks B      ] sys-apps/gentoo-systemd-integration ("sys-apps/gentoo-systemd-integration" is blocking sys-fs/udev-233)

 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.

  (sys-fs/udev-233:0/0::gentoo, ebuild scheduled for merge) pulled in by
    >=sys-fs/udev-232:0/0[abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_ppc_32(-)?,abi_ppc_64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] (>=sys-fs/udev-232:0/0[abi_x86_32(-),abi_x86_64(-)]) required by (virtual/libudev-232:0/1::gentoo, ebuild scheduled for merge)

  (sys-fs/eudev-3.1.5:0/0::gentoo, installed) pulled in by
    >=sys-fs/eudev-2.1.1 required by (virtual/udev-217:0/0::gentoo, installed)

  (sys-apps/systemd-233-r6:0/2::gentoo, ebuild scheduled for merge) pulled in by
    >=sys-apps/systemd-207 required by (sys-apps/gentoo-systemd-integration-7:0/0::gentoo, ebuild scheduled for merge)
    sys-apps/systemd required by (virtual/tmpfiles-0:0/0::gentoo, installed)
    sys-apps/systemd:0= required by (sys-apps/dbus-1.10.18:0/0::gentoo, ebuild scheduled for merge)
    sys-apps/systemd[pam] required by (sys-auth/pambase-20150213-r1:0/0::gentoo, ebuild scheduled for merge)


For more information about Blocked Packages, please refer to the following
section of the Gentoo Linux x86 Handbook (architecture is irrelevant):

https://wiki.gentoo.org/wiki/Handbook:X86/Working/Portage#Blocked_packages

03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2200 [8086:0891] (rev c4)
        Subsystem: Intel Corporation Centrino Wireless-N 2200 BGN [8086:4222]
        Flags: fast devsel, IRQ 17
        Memory at f1c00000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: [c8] Power Management version 3
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [e0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Device Serial Number 9c-4e-36-ff-ff-ba-4c-e4
        Kernel modules: iwlwifi

cd /var/lib/postgresql/9.6/
tar -cvzf main_backup-`date +%s`.tgz main
rm -rf main
mkdir main
chmod go-rwx main
pg_basebackup -P -R -X stream -c fast -h x.x.x.x -U postgres \
  -D ./main

~/9.6$ pg_basebackup -P -R -X stream -c fast -h x.x.x.x -U postgres -D ./main
Пароль:
pg_basebackup: не удалось получить заголовок резервной копии: ОШИБКА:  не удалось открыть каталог "./main": Отказано в доступе

# ping ya.ru
PING ya.ru(ya.ru (2a02:6b8::2:242)) 56 data bytes

# pveam update

Loading x86_64 4.12.12-gentoo...
Loading initial ramdisk...

1.6 GHz quad-core Intel N3160 “Braswell” Celeron processor with turbo boost to 2.24 GHz and Intel HD Graphics 400
4 GB of DDR3 RAM
32 GB eMMC flash for local storage (comes with 100GB Google Drive)
14.0″ 1920×1080 IPS display
2x USB 3.1 ports
HDMI out for external display
Combo headphone/microphone jack
“HD” webcam
802.11ac 2×2 dual-band WiFi
Bluetooth 4.2
3.42 Pounds
“14 hours” Quoted Battery Life
Kensington Lock

# fdisk -l | grep dev
Disk /dev/ram0: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram1: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram2: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram3: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram4: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram5: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram6: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram7: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram8: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram9: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram10: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram11: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram12: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram13: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram14: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/ram15: 8 MiB, 8388608 bytes, 16384 sectors
Disk /dev/loop0: 236 MiB, 247492608 bytes, 483384 sectors (хз что это)
Disk /dev/sda: 14.7 GiB, 15724707840 bytes, 30712320 sectors (это live-usb)
/dev/sda4  *      256 30712319 30712064 14.7G  c W95 FAT32 (LBA)

# lspci
00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 35)
00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 35)
00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 35)
00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 35)
00:1b.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller (rev 35)
00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 35)
00:1c.2 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #3 (rev 35)
00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 35)
02:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)

deb http://mirror.yandex.ru/debian jessie main contrib non-free

Version: 1:13.14.1~dfsg-2+deb9u2
Version: 1:13.14.1~dfsg-2+deb9u1
Version: 1:11.13.1~dfsg-2+deb8u2

# apt-get -t jessie install asterisk
Чтение списков пакетов… Готово
Построение дерева зависимостей
Чтение информации о состоянии… Готово
Некоторые пакеты невозможно установить. Возможно, вы просите невозможного,
или же используете нестабильную версию дистрибутива, где запрошенные вами
пакеты ещё не созданы или были удалены из Incoming.
Следующая информация, возможно, поможет вам:

Пакеты, имеющие неудовлетворённые зависимости:
 asterisk : Зависит: asterisk-modules (= 1:11.13.1~dfsg-2+deb8u2) но он не будет установлен
E: Невозможно исправить ошибки, у вас отложены (held) битые пакеты.

Po3 is up (connected)
  Interface index is 1002
  Hardware is aggregated ethernet interface(s), MAC address is xx:xx:xx:xx:xx:xx
  Interface MTU is 9000
  Link is up for 0 days, 0 hours, 36 minutes and 4 seconds
    Link aggregation type is static LAG
    No. of members in this port-channel: 2 (active 2)
      tengigabitethernet1/0/3, full-duplex, 10000Mbps (active)
      tengigabitethernet1/0/15, full-duplex, 10000Mbps (active)
    Active bandwidth is 20000Mbps

auto bond0
allow-hotplug bond0
iface bond0 inet static
address x.x.x.0/24
gateway x.x.x.y
dns-nameservers x.x.x.z
up /sbin/ifenslave bond0 eno7
up /sbin/ifenslave bond0 eno8
postup ifconfig eno7 mtu 9000 && ifconfig eno8 mtu 9000 && ifconfig bond0 mtu 9000

USE="cpu_flags_x86_mmxext" emerge www-client/firefox

[quote][quote][quote] Emerging (1 of 4) media-sound/lame-3.99.5-r1::gentoo[br][/quote][/quote][/quote] * lame-3.99.5.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ...                                                                                                                             [ ok ]
 * lame-3.99.5-automake-2.12.patch.gz SHA256 SHA512 WHIRLPOOL size ;-) ...                                                                                                             [ ok ]
[quote][quote][quote] Unpacking source...[br] Unpacking lame-3.99.5.tar.gz to /var/tmp/portage/media-sound/lame-3.99.5-r1/work[br] Unpacking lame-3.99.5-automake-2.12.patch.gz to /var/tmp/portage/media-sound/lame-3.99.5-r1/work[br] Source unpacked in /var/tmp/portage/media-sound/lame-3.99.5-r1/work[br] Preparing source in /var/tmp/portage/media-sound/lame-3.99.5-r1/work/lame-3.99.5 ...[br][/quote][/quote][/quote] * Applying lame-3.96-ccc.patch ...                                                                                                                                                    [ ok ]
 * Applying lame-3.98-gtk-path.patch ...                                                                                                                                               [ ok ]
 * Applying lame-3.99.5-tinfo.patch ...                                                                                                                                                [ ok ]
 * Applying lame-3.99.5-msse.patch ...                                                                                                                                                 [ ok ]
 * Applying lame-3.99.5-automake-2.12.patch ...                                                                                                                                        [ ok ]
 * Running eautoreconf in '/var/tmp/portage/media-sound/lame-3.99.5-r1/work/lame-3.99.5' ...
 * Running libtoolize --install --copy --force --automake ...                                                                                                                          [ ok ]
 * Running aclocal -I . ...                                                                                                                                                            [ ok ]
 * This package has a configure.in file which has long been deprecated.  Please
 * update it to use configure.ac instead as newer versions of autotools will die
 * when it finds this file.  See https://bugs.gentoo.org/426262 for details.
 * Running autoconf -I . --force ...                                                                                                                                                   [ !! ]

 * Failed Running autoconf !
 *
 * Include in your bugreport the contents of:
 *
 *   /var/tmp/portage/media-sound/lame-3.99.5-r1/temp/autoconf.out

 * ERROR: media-sound/lame-3.99.5-r1::gentoo failed (prepare phase):
 *   Failed Running autoconf !
 *
 * Call stack:
 *     ebuild.sh, line  115:  Called src_prepare
 *   environment, line 2761:  Called eautoreconf
 *   environment, line  793:  Called eautoconf '--force'
 *   environment, line  706:  Called autotools_run_tool '--at-m4flags' 'autoconf' '--force'
 *   environment, line  525:  Called die
 * The specific snippet of code:
 *           die "Failed Running $1 !";
 *
 * If you need support, post the output of `emerge --info '=media-sound/lame-3.99.5-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=media-sound/lame-3.99.5-r1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/media-sound/lame-3.99.5-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/media-sound/lame-3.99.5-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/media-sound/lame-3.99.5-r1/work/lame-3.99.5'
 * S: '/var/tmp/portage/media-sound/lame-3.99.5-r1/work/lame-3.99.5'

[quote][quote][quote] Failed to emerge media-sound/lame-3.99.5-r1, Log file:[br][/quote][/quote][/quote][quote][quote][quote]  '/var/tmp/portage/media-sound/lame-3.99.5-r1/temp/build.log'[br][/quote][/quote][/quote] * Messages for package media-sound/lame-3.99.5-r1:

 * Failed Running autoconf !
 *
 * Include in your bugreport the contents of:
 *
 *   /var/tmp/portage/media-sound/lame-3.99.5-r1/temp/autoconf.out
 * ERROR: media-sound/lame-3.99.5-r1::gentoo failed (prepare phase):
 *   Failed Running autoconf !
 *
 * Call stack:
 *     ebuild.sh, line  115:  Called src_prepare
 *   environment, line 2761:  Called eautoreconf
 *   environment, line  793:  Called eautoconf '--force'
 *   environment, line  706:  Called autotools_run_tool '--at-m4flags' 'autoconf' '--force'
 *   environment, line  525:  Called die
 * The specific snippet of code:
 *           die "Failed Running $1 !";
 *
 * If you need support, post the output of `emerge --info '=media-sound/lame-3.99.5-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=media-sound/lame-3.99.5-r1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/media-sound/lame-3.99.5-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/media-sound/lame-3.99.5-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/media-sound/lame-3.99.5-r1/work/lame-3.99.5'
 * S: '/var/tmp/portage/media-sound/lame-3.99.5-r1/work/lame-3.99.5'

 # emerge xfce-extra/xfce4-mixer

 * IMPORTANT: 1 news items need reading for repository 'gentoo'.
 * Use eselect news read to view new items.

Calculating dependencies... done!

emerge: there are no ebuilds to satisfy "xfce-extra/xfce4-mixer".

emerge: searching for similar names...
emerge: Maybe you meant any of these: xfce-extra/xfce4-dict, xfce-extra/xfce4-taskmanager, xfce-extra/xfce4-vala?

ceph osd pool create ssd 128 128
ceph osd pool set ssd size 3
ceph osd pool set ssd min_size 2
# правило, размещающее пул только на SSD
ceph osd pool set ssd crush_rule replicated_rule_ssd
rbd create ssd/ssd --size 588G
rbd feature disable ssd/ssd object-map fast-diff deep-flatten
ceph osd pool application enable ssd proxmox

rbd: ceph-storage
        monhost x.x.x.x y.y.y.y z.z.z.z
        pool ssd
        content rootdir,images
        username admin

[client.admin] 
    key = мой_ключ

CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m

usbcore: registred new interface driver asix

# ceph osd pool delete cephfs_data cephfs_data --yes-i-really-really-mean-it
Error EBUSY: pool 'cephfs_data' is in use by CephFS

# ceph fs rm cephfs
Error EINVAL: all MDS daemons must be inactive before removing filesystem

ceph mds stop 0
Error EINVAL: can't tell the root (0) or tableserver (0) to deactivate

TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x700000e (or later)

[Пт окт 6 15:37:25 2017] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x700000e
[Пт окт 6 15:37:25 2017] microcode: microcode updated early to revision 0x700000d, date = 2016-10-12

ceph-disk prepare --bluestore /dev/sdc --block.db /dev/sdm6

Setting name!
partNum is 0
REALLY setting name!
The operation has completed successfully.
prepare_device: OSD will not be hot-swappable if block.db is not the same device as the osd data
prepare_device: Block.db /dev/sdm6 was not prepared with ceph-disk. Symlinking directly.
Setting name!
partNum is 1
REALLY setting name!
The operation has completed successfully.
The operation has completed successfully.
meta-data=/dev/sdc1 isize=2048 agcount=4, agsize=6400 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=0
data = bsize=4096 blocks=25600, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=1608, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot or after you
run partprobe(8) or kpartx(8)
The operation has completed successfully.

ceph-disk activate-all 

got monmap epoch 1
2017-09-12 14:07:33.711863 7f0fba54be00 -1 bdev(0x55b99f8c6fc0 /var/lib/ceph/tmp/mnt.vyVmpd/block.db) open open got: (13) Permission denied
2017-09-12 14:07:33.711875 7f0fba54be00 -1 bluestore(/var/lib/ceph/tmp/mnt.vyVmpd) _open_db add block device(/var/lib/ceph/tmp/mnt.vyVmpd/block.db) returned: (13) Permission denied
2017-09-12 14:07:33.993025 7f0fba54be00 -1 bluestore(/var/lib/ceph/tmp/mnt.vyVmpd) mkfs failed, (13) Permission denied
2017-09-12 14:07:33.993063 7f0fba54be00 -1 OSD::mkfs: ObjectStore::mkfs failed with error (13) Permission denied
2017-09-12 14:07:33.993275 7f0fba54be00 -1 ** ERROR: error creating empty object store in /var/lib/ceph/tmp/mnt.vyVmpd: (13) Permission denied
mount_activate: Failed to activate
ceph-disk: Command '['/usr/bin/ceph-osd', '--cluster', 'ceph', '--mkfs', '-i', u'2', '--monmap', '/var/lib/ceph/tmp/mnt.vyVmpd/activate.monmap', '--osd-data', '/var/lib/ceph/tmp/mnt.vyVmpd', '--osd-uuid', u'1b0a0046-1cca-4684-93a2-8012320109d8', '--setuser', 'ceph', '--setgroup', 'ceph']' returned non-zero exit status 1
Removed symlink /etc/systemd/system/ceph-osd.target.wants/ceph-osd@1.service.
Created symlink from /etc/systemd/system/ceph-osd.target.wants/ceph-osd@1.service to /lib/systemd/system/ceph-osd@.service.
Removed symlink /etc/systemd/system/ceph-osd.target.wants/ceph-osd@0.service.
Created symlink from /etc/systemd/system/ceph-osd.target.wants/ceph-osd@0.service to /lib/systemd/system/ceph-osd@.service.
ceph-disk: Error: One or more partitions failed to activate

[ceph_deploy.conf][DEBUG ] found configuration file at: /home/cephuser/.cephdeploy.conf
[ceph_deploy.cli][INFO ] Invoked (1.5.38): /usr/bin/ceph-deploy new ceph1
[ceph_deploy.cli][INFO ] ceph-deploy options:
[ceph_deploy.cli][INFO ] username : None
[ceph_deploy.cli][INFO ] verbose : False
[ceph_deploy.cli][INFO ] overwrite_conf : False
[ceph_deploy.cli][INFO ] quiet : False
[ceph_deploy.cli][INFO ] cd_conf : 
[ceph_deploy.cli][INFO ] cluster : ceph
[ceph_deploy.cli][INFO ] ssh_copykey : True
[ceph_deploy.cli][INFO ] mon : ['ceph1']
[ceph_deploy.cli][INFO ] func : 
[ceph_deploy.cli][INFO ] public_network : None
[ceph_deploy.cli][INFO ] ceph_conf : None
[ceph_deploy.cli][INFO ] cluster_network : None
[ceph_deploy.cli][INFO ] default_release : False
[ceph_deploy.cli][INFO ] fsid : None
[ceph_deploy.new][DEBUG ] Creating new cluster named ceph
[ceph_deploy.new][INFO ] making sure passwordless SSH succeeds
[ceph1][DEBUG ] connected to host: ceph-deploy
[ceph1][INFO ] Running command: ssh -CT -o BatchMode=yes ceph1
sh: 1: python2: not found
[ceph_deploy][ERROR ] RuntimeError: connecting to host: ceph1 resulted in errors: IOError cannot send (already closed?)

sudo apt-get install python-minimal
Чтение списков пакетов… Готово
Построение дерева зависимостей
Чтение информации о состоянии… Готово
Уже установлен пакет python-minimal самой новой версии (2.7.11-1).
обновлено 0, установлено 0 новых пакетов, для удаления отмечено 0 пакетов, и 14 пакетов не обновлено.

Не удалось установить GRUB на /dev/md.
Не удалось выполнить команду 'grub-install /dev/md'.
Это неисправимая ошибка.

grub-installer: mdadm: /dev/md does not appear to be an md device
grub-installer: grub-installer: error:
grub-installer: ioctl RAID_VERSION errorL Inappropriate ioctl for device.
grub-installer: error: Running 'grub-install --force "/dev/md" failed.

Personalities : [raid1]
md1 : active raid1 sdm5[0] sdo5[2] sdn5[1]
        2050011728 blocks super 1.2 [3/3] [UUU]
md0 : active raid1 sdm1[0] sdo1[2] sdn1[1]
        29279232 blocks super 1.2 [3/3] [UUU]
unused devices: <none>