Ситуация такова:
Имеется мать Tyan Tiger MPX с двумя процессорами..
И установлен Debian Etch. Раньше, на Sarge, все работало, после обновления - работает наполовину :(
sensors.conf
chip "w83781d-*"
ignore in0
ignore in1
ignore in5
ignore in7
ignore vid
label in2 "AGP V"
label in3 " +5 V"
label in4 "DDR V"
label in6 "3 VSB"
label in8 "Bat V"
label fan1 "chs1 Fan"
label fan2 "chs2 Fan"
label fan3 "chs3 Fan"
label temp1 "VRM2 Temp"
label temp2 "CPU1 Temp"
label temp3 "CPU2 Temp"
compute in3 ((6.8/10)+1)*@ , @/((6.8/10)+1)
# set limits to 5% for the critical voltages
# set limits to 10% for the non-critical voltages
# set limits to 20% for the battery voltage
set in2_min 3.3 * 0.95
set in2_max 3.3 * 1.05
set in3_min 5.0 * 0.95
set in3_max 5.0 * 1.05
set in6_max 3.0 * 1.05
set in6_min 3.0 * 0.95
set in8_min 3.3 * 0.80
set in8_max 3.3 * 1.20
# thermal sensor types (do not adjust)
set sensor1 2
set sensor2 2
set sensor3 2
# examples for temperature limits
set temp1_over 40
set temp1_hyst 60
set temp2_over 70
set temp2_hyst 80
set temp3_over 70
set temp3_hyst 80
chip "w83627hf-*"
ignore in3
ignore in6
ignore in7
ignore in8
ignore vid
ignore fan3
label in0 "VCore1"
label in1 "VCore2"
label in2 "+3.3 V"
label in4 " +12 V"
label in5 " -12 V"
label temp1 "VRM1 Temp"
label temp2 "AGP Temp"
label temp3 "DDR Temp"
label fan1 "CPU1 Fan"
label fan2 "CPU2 Fan"
compute in4 ((3.8/1)+1)*@ , @/((3.8/1)+1)
compute in5 (5.14*@)-14.91 , (@+14.91)/5.14
# set limits to 5% for the critical voltages
# set limits to 10% for the non-critical voltages
# set limits to 20% for the battery voltage
set in0_min vid*0.95
set in0_max vid*1.05
set in1_min vid*0.95
set in1_max vid*1.05
set in2_min 3.3*0.95
set in2_max 3.3*1.05
set in4_max 12 * 0.90
set in4_min 12 * 1.10
set in5_max -12 * 0.90
set in5_min -12 * 1.10
# thermal sensor types (do not adjust)
set sensor1 2
set sensor2 2
set sensor3 2
# examples for temperature limits
set temp1_over 40
set temp1_hyst 37
set temp2_over 52
set temp2_hyst 47
set temp3_over 52
set temp3_hyst 47
set beep_enable 0
Загруженные модули:
# lsmod
Module Size Used by
w83781d 30312 0
hwmon_vid 3008 1 w83781d
i2c_isa 5952 1 w83781d
i2c_amd756 7428 0
i2c_core 21824 3 w83781d,i2c_isa,i2c_amd756
Проблема в следующем: sensors -A выводит ровно половину..
Т.е. данные по чипу w83781d тупо не отображаются..
Долгое и нудное мучение гугла показало, что, вроде как, модуль w83781d может обслуживать оба чипа.. Но почему-то нифига не обслуживает :(
Вот вывод sensors -A:
# sensors -A
w83627hf-i2c-0-2c
VCore1: +1.60 V (min = +1.57 V, max = +1.73 V)
VCore2: +1.62 V (min = +1.57 V, max = +1.73 V)
+3.3 V: +3.10 V (min = +3.14 V, max = +3.46 V) ALARM
+12 V: +11.37 V (min = +13.21 V, max = +10.83 V) ALARM
-12 V: -12.44 V (min = -13.18 V, max = -10.88 V)
CPU1 Fan: 2922 RPM (min = 2710 RPM, div = 2)
CPU2 Fan: 2934 RPM (min = 4753 RPM, div = 2) ALARM
VRM1 Temp: +31 C (high = +40 C, hyst = +37 C) sensor = transistor
AGP Temp: +0.5 C (high = +52 C, hyst = +47 C) sensor = transistor
DDR Temp: +13.0 C (high = +52 C, hyst = +47 C) sensor = transistor
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm disabled
Подскажите пожалуйста, как это лечить? :)>>>