curl -q -s --interface 192.168.1.1 'api.myip.com'

$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute
       valid_lft forever preferred_lft forever
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether bc:ae:c5:bb:d8:e8 brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.107/24 metric 1024 brd 192.168.0.255 scope global enp2s0
       valid_lft forever preferred_lft forever
    inet6 fe80::beae:c5ff:febb:d8e8/64 scope link proto kernel_ll
       valid_lft forever preferred_lft forever
4: enp2s0.100@enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether bc:ae:c5:bb:d8:e8 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.1/24 brd 192.168.1.255 scope global enp2s0.100
       valid_lft forever preferred_lft forever
    inet6 fe80::beae:c5ff:febb:d8e8/64 scope link proto kernel_ll
       valid_lft forever preferred_lft forever
5: wg1: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1420 qdisc noqueue state UNKNOWN group default qlen 1000
    link/none
    inet 10.2.0.2/32 scope global wg1
       valid_lft forever preferred_lft forever

$ ip r
default via 192.168.0.1 dev enp2s0 proto dhcp src 192.168.0.107 metric 1024
109.86.15.0/24 via 192.168.0.1 dev enp2s0
192.168.0.0/24 dev enp2s0 proto kernel scope link src 192.168.0.107 metric 1024
192.168.0.1 dev enp2s0 proto dhcp scope link src 192.168.0.107 metric 1024
192.168.1.0/24 dev enp2s0.100 proto kernel scope link src 192.168.1.1

$ cat /etc/systemd/network/20-enp2s0.network
[Match]
Name=enp2s0

[Network]
DHCP=yes

VLAN=enp2s0.100

$  cat /etc/systemd/network/21-enp2s0.100.netdev
[NetDev]
Name=enp2s0.100
Kind=vlan

[VLAN]
Id=100

$ cat /etc/systemd/network/22-enp2s0.100.network
[Match]
Name=enp2s0.100

[Address]
Address=192.168.1.1/24

[Route]
Gateway=192.168.0.1

arecord --duration=5 --format=dat test-mic.wav

Recording WAVE 'test-mic.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
arecord: pcm_read:2272: read error: Ошибка ввода/вывода

aplay /usr/share/sounds/alsa/Front_Center.wav

aplay: main:850: audio open error: Устройство или ресурс занято

cat /etc/asound.conf

pcm.!default {
    type hw
    card SB
}

ctl.!default {
    type hw
    card SB
}

sudo fuser -v /dev/snd/*

                     ПОЛЬЗ-ЛЬ    PID ДОСТУП КОМАНДА
/dev/snd/controlC0:  dmp         394 F.... wireplumber
/dev/snd/pcmC0D0p:   dmp         393 F...m pipewire
/dev/snd/seq:        dmp         393 F.... pipewire

arecord -l

**** List of CAPTURE Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: VT1708S Analog [VT1708S Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

arecord -L

null
    Discard all samples (playback) or generate zero samples (capture)
lavrate
    Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pipewire
    PipeWire Sound Server
pulse
    PulseAudio Sound Server
speex
    Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
sysdefault:CARD=SB
    HDA ATI SB, VT1708S Analog
    Default Audio Device
front:CARD=SB,DEV=0
    HDA ATI SB, VT1708S Analog
    Front output / input
usbstream:CARD=SB
    HDA ATI SB
    USB Stream Output