LINUX.ORG.RU

Сообщения Azq2

 

Alt + Shift блокирует ввод текста в Ubuntu 17.10 (Unity)

Всегда использовал такой способ: Жму Alt + Shift что бы сменить раскладку и отпускаю ТОЛЬКО alt, что бы дальше продолжить вводить символ или большую букву.

А сейчас в Ubuntu что-то сломали или (намеренно сделали) и пока зажат шифт - ввод текста не работает!

Т.е. баг повторяется так:

1. Жмём alt

2. Жмём shift

3. Отпускаем только alt

4. Пробуем вводить текст - он не вводится. Окно даже не в фокусе.

Если использовать Shift-Alt, то баг не повторяется.

Кто нибудь сталкивался с этим багом?

Просто жить не даёт, не могу даже просто текст набирать.

 , ,

Azq2
()

Не работает route в OpenVPN Connect (Android)

Удалял:

push "redirect-gateway def1 bypass-dhcp"
Не помогло. Всё равно весь трафик идёт через VPN.

Добавлял насильно:

push "route 178.63.151.224 255.255.255.255 net_gateway"

И ещё множество разных вариаций с net_gateway/vpn_getaway и без них.

Всё равно трафик для 178.63.151.224 (айпи 2ip.ru для теста) идёт через VPN.

Добавлял route-nopull/route-noexec и на сервере и на кленте. Ничего не помогает.

В идеале хочется пробросить только одну подсеть через VPN (что бы не открывать её миру), а что бы остальное шло напрямую. Но клиент OpenVPN Сonnect и OpenVPN for Android почему-то весь трафик пускают через VPN.

Кто нибудь сталкивался с таким?

##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server.     #
#                                            #
# This configuration can be used by multiple #
# clients, however each client should have   #
# its own cert and key files.                #
#                                            #
# On Windows, you might want to rename this  #
# file so it has a .ovpn extension           #
##############################################

# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client

# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one.  On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap

# Are we connecting to a TCP or
# UDP server?  Use the same setting as
# on the server.
;proto tcp
proto udp

# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote *****************
;remote my-server-2 1194

# Choose a random host from the remote
# list for load-balancing.  Otherwise
# try hosts in the order specified.
;remote-random

# Keep trying indefinitely to resolve the
# host name of the OpenVPN server.  Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite

# Most clients don't need to bind to
# a specific local port number.
nobind

# Downgrade privileges after initialization (non-Windows only)
user nobody
group nogroup

# Try to preserve some state across restarts.
persist-key
persist-tun

# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here.  See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]

# Wireless networks often produce a lot
# of duplicate packets.  Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings

# SSL/TLS parms.
# See the server config file for more
# description.  It's best to use
# a separate .crt/.key file pair
# for each client.  A single ca
# file can be used for all clients.
#ca ca.crt
#cert client.crt
#key client.key

# Verify server certificate by checking that the
# certicate has the correct key usage set.
# This is an important precaution to protect against
# a potential attack discussed here:
#  http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the keyUsage set to
#   digitalSignature, keyEncipherment
# and the extendedKeyUsage to
#   serverAuth
# EasyRSA can do this for you.
remote-cert-tls server

# If a tls-auth key is used on the server
# then every client must also have the key.
;tls-auth ta.key 1

# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x

# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo

# Set log file verbosity.
verb 3

# Silence repeating messages
;mute 20

cipher AES-128-CBC
auth SHA256
key-direction 1

# script-security 2
# up /etc/openvpn/update-resolv-conf
# down /etc/openvpn/update-resolv-conf

#################################################
# Sample OpenVPN 2.0 config file for            #
# multi-client server.                          #
#                                               #
# This file is for the server side              #
# of a many-clients <-> one-server              #
# OpenVPN configuration.                        #
#                                               #
# OpenVPN also supports                         #
# single-machine <-> single-machine             #
# configurations (See the Examples page         #
# on the web site for more info).               #
#                                               #
# This config should work on Windows            #
# or Linux/BSD systems.  Remember on            #
# Windows to quote pathnames and use            #
# double backslashes, e.g.:                     #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
#                                               #
# Comments are preceded with '#' or ';'         #
#################################################

# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d

# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one.  You will need to
# open up this port on your firewall.
port ********

# TCP or UDP server?
;proto tcp
proto udp

# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one.  On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap

# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key).  Each client
# and the server must have their own cert and
# key file.  The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys.  Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca ca.crt
cert server.crt
key server.key  # This file should be kept secret

# Diffie hellman parameters.
# Generate your own with:
#   openssl dhparam -out dh2048.pem 2048
dh dh2048.pem

# Network topology
# Should be subnet (addressing via IP)
# unless Windows clients v2.0.9 and lower have to
# be supported (then net30, i.e. a /30 per client)
# Defaults to net30 (not recommended)
;topology subnet

# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0

# Maintain a record of client <-> virtual IP address
# associations in this file.  If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt

# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface.  Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0.  Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients.  Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100

# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses.  You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge

# Push routes to the client to allow it
# to reach other private subnets behind
# the server.  Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"

# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).

# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
#   iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN.  This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.

# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
#   ifconfig-push 10.9.0.1 10.9.0.2

# Suppose that you want to enable different
# firewall access policies for different groups
# of clients.  There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
#     group, and firewall the TUN/TAP interface
#     for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
#     modify the firewall in response to access
#     from different clients.  See man
#     page for more info on learn-address script.
;learn-address ./script

# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
push "redirect-gateway def1 bypass-dhcp"

# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses.  CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
push "dhcp-option DNS 208.67.222.222"
push "dhcp-option DNS 208.67.220.220"

# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
client-to-client

# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names.  This is recommended
# only for testing purposes.  For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn

# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120

# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
#   openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
tls-auth ta.key 0 # This file is secret
key-direction 0

# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
;cipher BF-CBC        # Blowfish (default)
cipher AES-128-CBC   # AES
;cipher DES-EDE3-CBC  # Triple-DES
auth SHA256

# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo

# The maximum number of concurrently connected
# clients we want to allow.
max-clients 10000

# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
user nobody
group nogroup

# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun

# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log

# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it.  Use one
# or the other (but not both).
log         openvpn.log
log-append  openvpn.log

# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3

# Silence repeating messages.  At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20

push "route 178.63.151.224 255.255.255.255 net_gateway"

 

Azq2
()

Неправильный размер 10 размера шрифта?

Есть два ос - Ubuntu 14.04 и 16.10

Одинаковый шрифт Monospace:

azq2@zhumarin:~$ fc-match Monospace
DejaVuSansMono.ttf: "DejaVu Sans Mono" "Book"

Но рендерится по разному! В 14.04 размер для 10-го шрифта «p» 11px, а в 16.10 он уже ровно 10px. При этом 11-й шрифт в 16.10 уже целых 12px

Получается теперь, что при 10px плохо видно, а при 11px слишком большой шрифт.

Вот нарисовал, где хорошо видно проблему: http://i.imgur.com/diHfM3K.png

Ктоо-нибудь сталкивался с таким? Сам шрифт не имеет значения, я его пытался откатывать.

 , ,

Azq2
()

Странные мигания, если используется опенгл

Пример: https://youtu.be/cpC-uHu6NUA (под конец хорошо видно)

Убунту 16.04, Интел хд 2000, драйвер 1.4.0

От убунту 15.04 появился такой баг. Ещё и адово тормозить супертукс стал. Залипает бывает. На ранних версиях убунты всё норм было.

Такие мигания иногда есть даже если просто мышью водить по рабочему столу.

Апгрейд ядра и драйвера не помогло.

Кто нибудь сталкивался?

 , ,

Azq2
()

Yosemite (amd) и GT430

Это, наверное, суицид писать про хакинтошь на лоре :D

https://pp.vk.me/c631721/v631721747/2b859/wizrDW3lOLM.jpg

https://pp.vk.me/c631721/v631721747/2b863/yge3Fe-5JW0.jpg

Падает хром и сафари + артефакты. Остальной гуй норм выглядит, анимции плавные. Куда копать?

 

Azq2
()

Проблемы с ШГ в Xenial :(

http://i.imgur.com/sV7N4KB.png

1. Шрифт в Xenial, Monospace 10

2. Шрифт в Trusty, Monospace 10 (то, что я хочу!)

3. Шрфит в Xenail, Monospace 11

Может показаться что всё ок, но в Xenial почему-то текст меньше на 1px! http://i.imgur.com/8biaNM4.png

Я пробовал увеличить высоту шрифта, но получилось как в п3 Либо меньше, либо больше. Третьего не дано. fc-match везде выдаёт Dejavu Mono Book

Я пробовал брать fonts-dejavu с trusty - не помогло. Как такое возможно? Как исправить шрифты?

 ,

Azq2
()

s.hklmm.com добавился в hosts O_O

azq2@zhumarin:~$ cat /etc/hosts
127.0.0.1 s.hklmm.com

Откуда-то добавилось первой записью в hosts. Никто не знает что это и кто добавляет? Может было у кого?

 , ,

Azq2
()

Чем распаковать emmc раздел?

Что-то аццки туплю.

Есть раздел с ядром и рутфс.

root@android:/ # hexdump -C -n128 /dev/block/mmcblk0boot0                      
00000000  45 4d 4d 43 5f 42 4f 4f  54 00 00 00 01 00 00 00  |EMMC_BOOT.......|
00000010  00 02 00 00 ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
00000020  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
00000080

Подскажите, чем его распаковать. И обратно запаковать. Если что - MT6589, Android.

 ,

Azq2
()

niki-bot, взлом меня

Привет всем!

Меня тут немного скомпрометировали. Была слита судя по всему переписка из pidgin. В худшем случае - история google chrome. Судя по всему при запуске говна какого-то под wine. Дак вот, теперь по ссылкам, которые знаю только я, ходит странная ересь:

Дата: 2014-05-29 08:34:01 
IP-адрес: 64.79.85.202 
Браузер: niki-bot 

Кто-нибудь что-то знает о сабже? Через что слили, я так и не нашёл. Сканил ~/.wine через clamav, почти ничего. Гуглировал - не помогло, нет инфы по этому боту. Боты с одного хвостинга.

Кто-нибудь сталкивался?

Azq2
()

gstreamer. flv в YUY2

Есть flv с кодеком h263. Нужно сконвертировать в поток YUY2 для v4l через gst-launch.

Что только не пробовал - не хочет. Работает только

gst-launch videotestsrc ! ffmpegcolorspace ! «video/x-raw-yuv,format=(fourcc)YUY2» ! v4l2sink device=/dev/video0

И всё. Как реализовать сабж?

 ,

Azq2
()

Ubuntu 14.04, Unity. Пропадает скайп с трея.

Сразу после запуска он там появляется. Через секунду пропадает. Но если при этом запустить любую другую прожку, которая добавляется в трей - норм всё, после этого больше не пропадает oO

Wtf? Кто-нибудь сталкивался, лечил этот сабж?

 , , ,

Azq2
()

Клиенты не доходят до сервера

http://dumpz.org/1030969/ - исходники недосервера

Тестирую через ab:

azq2@zhumarin:~/проекты/ololo$ ab -n200000 http://127.0.0.1:1488/
This is ApacheBench, Version 2.3 <$Revision: 655654 $>
Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/
Licensed to The Apache Software Foundation, http://www.apache.org/

Benchmarking 127.0.0.1 (be patient)
Completed 20000 requests
Completed 40000 requests
Completed 60000 requests
Completed 80000 requests
Completed 100000 requests
Completed 120000 requests
Completed 140000 requests
Completed 160000 requests
Completed 180000 requests
apr_poll: The timeout specified has expired (70007)
Total of 189744 requests completed

Почему оно внезапно падает по таймауту? До сервера просто не доходят коннекты, висит на __accept_nocancel

Как только не пробовал. Виснет постоянно на одном и том же месте. (кол-ве запросов) И только с моим недосервером.

Azq2
()

Помогите распаковать dll :D

http://rghost.ru/51398832

Запакован UPX-ом. Со всякими OllyDbg не дружу ))

 ,

Azq2
()

Проблема с бутом

Есть Acronis и gparted. Записали их на флешку через UltraISO, оба не бутятся:

gparted:

 vesamenu.c32: Not a COM32R image 

Acronis:

Disk formatted with UltraISO 9.0
no systemdisk booting from harddisk

Ubuntu не пробовали, ещё качается. Так вот, ЧЯДНТ? Как пофиксить? Бутится через дисковод никак, он сломан.

dd не предлагать, я за 600 км от того ПК, нет возможности =))

 , ,

Azq2
()

Посоветуйте ноут

Главное, что бы ммммаксимум долго держал заряд и экран не меньше 15.6"

Производительность не так важна, генты собирать не собираюсь, в основном покодить и чтобы хром нитармазил ))

// Сорри, иф запрещено по правилам или не в тот раздел =))

 

Azq2
()

На всех разрешениях, кроме full hd - мыло

Ужасное мыло. Как-то можно исправить?

Azq2
()

FULL HD, плющит изображение по ширине o_O

Купил себе full hd Монитор. Но изображение почему-то сплющенное по ширине!

Монитор: http://hard.rozetka.com.ua/asus_vs229hr/p242079/

ОС: Ubuntu 13.04

Видео карта: GeForce GT 430

Квадрат 50x50 рендерится как прямоугольник, например. :(

Как исправить?

Фото: http://fc13.spaces.ru/f/08017010015815511817318008807519719922306716508800603...

 ,

Azq2
()

Помогите определить, в каком формате это ядро

http://zhumarin.spaces.ru/files/?read=44592302

Помогите определить, в каком формате это ядро и как сделать так же.

И не zImage и не uImage и даже не Image. Хотя при этом бутлоадер называется u-boot o_O

 , ,

Azq2
()

Asus Xonar DSX, не работает аналоговый выход

При этом цифровой - норм. На аналоговом молчит.

04:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio]
ii  alsa-base                                                   1.0.25+dfsg-0ubuntu4                       all          ALSA driver configuration files
ii  alsa-utils                                                  1.0.25-4ubuntu2                            amd64        Utilities for configuring and using ALSA
ii  bluez-alsa:amd64                                            4.101-0ubuntu8b1                           amd64        Bluetooth ALSA support
ii  bluez-alsa:i386                                             4.101-0ubuntu8b1                           i386         Bluetooth ALSA support
ii  gstreamer0.10-alsa:amd64                                    0.10.36-1.1ubuntu1                         amd64        GStreamer plugin for ALSA
ii  gstreamer1.0-alsa:amd64                                     1.0.6-1                                    amd64        GStreamer plugin for ALSA
azq2@zhumarin:~$ uname -a
Linux zhumarin 3.12.0+ #1 SMP Tue Nov 12 22:34:41 EET 2013 x86_64 x86_64 x86_64 GNU/Linux
azq2@zhumarin:~$ aplay -L
default
    Playback/recording through the PulseAudio sound server
sysdefault:CARD=DSX
    Xonar DSX, Multichannel
    Default Audio Device
front:CARD=DSX,DEV=0
    Xonar DSX, Multichannel
    Front speakers
surround40:CARD=DSX,DEV=0
    Xonar DSX, Multichannel
    4.0 Surround output to Front and Rear speakers
surround41:CARD=DSX,DEV=0
    Xonar DSX, Multichannel
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=DSX,DEV=0
    Xonar DSX, Multichannel
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=DSX,DEV=0
    Xonar DSX, Multichannel
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=DSX,DEV=0
    Xonar DSX, Multichannel
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=DSX,DEV=0
    Xonar DSX, Multichannel
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=DSX,DEV=0
    Xonar DSX, Multichannel
    Direct sample mixing device
dmix:CARD=DSX,DEV=1
    Xonar DSX, Digital
    Direct sample mixing device
dsnoop:CARD=DSX,DEV=0
    Xonar DSX, Multichannel
    Direct sample snooping device
dsnoop:CARD=DSX,DEV=1
    Xonar DSX, Digital
    Direct sample snooping device
hw:CARD=DSX,DEV=0
    Xonar DSX, Multichannel
    Direct hardware device without any conversions
hw:CARD=DSX,DEV=1
    Xonar DSX, Digital
    Direct hardware device without any conversions
plughw:CARD=DSX,DEV=0
    Xonar DSX, Multichannel
    Hardware device with all software conversions
plughw:CARD=DSX,DEV=1
    Xonar DSX, Digital
    Hardware device with all software conversions
sysdefault:CARD=NVidia
    HDA NVidia, ALC887-VD Analog
    Default Audio Device
front:CARD=NVidia,DEV=0
    HDA NVidia, ALC887-VD Analog
    Front speakers
surround40:CARD=NVidia,DEV=0
    HDA NVidia, ALC887-VD Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
    HDA NVidia, ALC887-VD Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
    HDA NVidia, ALC887-VD Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
    HDA NVidia, ALC887-VD Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
    HDA NVidia, ALC887-VD Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=NVidia,DEV=0
    HDA NVidia, ALC887-VD Digital
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=NVidia,DEV=0
    HDA NVidia, ALC887-VD Analog
    Direct sample mixing device
dmix:CARD=NVidia,DEV=1
    HDA NVidia, ALC887-VD Digital
    Direct sample mixing device
dsnoop:CARD=NVidia,DEV=0
    HDA NVidia, ALC887-VD Analog
    Direct sample snooping device
dsnoop:CARD=NVidia,DEV=1
    HDA NVidia, ALC887-VD Digital
    Direct sample snooping device
hw:CARD=NVidia,DEV=0
    HDA NVidia, ALC887-VD Analog
    Direct hardware device without any conversions
hw:CARD=NVidia,DEV=1
    HDA NVidia, ALC887-VD Digital
    Direct hardware device without any conversions
plughw:CARD=NVidia,DEV=0
    HDA NVidia, ALC887-VD Analog
    Hardware device with all software conversions
plughw:CARD=NVidia,DEV=1
    HDA NVidia, ALC887-VD Digital
    Hardware device with all software conversions
hdmi:CARD=NVidia_1,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia_1,DEV=1
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia_1,DEV=2
    HDA NVidia, HDMI 0
    HDMI Audio Output
hdmi:CARD=NVidia_1,DEV=3
    HDA NVidia, HDMI 0
    HDMI Audio Output
dmix:CARD=NVidia_1,DEV=3
    HDA NVidia, HDMI 0
    Direct sample mixing device
dmix:CARD=NVidia_1,DEV=7
    HDA NVidia, HDMI 0
    Direct sample mixing device
dmix:CARD=NVidia_1,DEV=8
    HDA NVidia, HDMI 0
    Direct sample mixing device
dmix:CARD=NVidia_1,DEV=9
    HDA NVidia, HDMI 0
    Direct sample mixing device
dsnoop:CARD=NVidia_1,DEV=3
    HDA NVidia, HDMI 0
    Direct sample snooping device
dsnoop:CARD=NVidia_1,DEV=7
    HDA NVidia, HDMI 0
    Direct sample snooping device
dsnoop:CARD=NVidia_1,DEV=8
    HDA NVidia, HDMI 0
    Direct sample snooping device
dsnoop:CARD=NVidia_1,DEV=9
    HDA NVidia, HDMI 0
    Direct sample snooping device
hw:CARD=NVidia_1,DEV=3
    HDA NVidia, HDMI 0
    Direct hardware device without any conversions
hw:CARD=NVidia_1,DEV=7
    HDA NVidia, HDMI 0
    Direct hardware device without any conversions
hw:CARD=NVidia_1,DEV=8
    HDA NVidia, HDMI 0
    Direct hardware device without any conversions
hw:CARD=NVidia_1,DEV=9
    HDA NVidia, HDMI 0
    Direct hardware device without any conversions
plughw:CARD=NVidia_1,DEV=3
    HDA NVidia, HDMI 0
    Hardware device with all software conversions
plughw:CARD=NVidia_1,DEV=7
    HDA NVidia, HDMI 0
    Hardware device with all software conversions
plughw:CARD=NVidia_1,DEV=8
    HDA NVidia, HDMI 0
    Hardware device with all software conversions
plughw:CARD=NVidia_1,DEV=9
    HDA NVidia, HDMI 0
    Hardware device with all software conversions

 ,

Azq2
()

ШГ в хроме ((((

http://i.imgur.com/aUeEfnF.png

Внезапно вот таким шрифт стал. И именно в хроме. После юзания KDE. Никак не могу пофиксить. Что с ним? :(

 ,

Azq2
()

RSS подписка на новые темы