LINUX.ORG.RU
← Radeon 5770 fglrx 11.3 direct rendering: No
настройка тюнера →

Он уже есть. Опиши проблему. Хочешь чтобы у тебя в Nautilus/Konqueror было подписано что есть SD, а что CF? Это есть уже очень очень много лет.

ZenitharChampion ★★★★★
()
Ответ на: комментарий от ZenitharChampion

>Он уже есть. Опиши проблему. Хочешь чтобы у тебя в Nautilus/Konqueror было подписано что есть SD, а что CF? Это есть уже очень очень много лет.

Да, я хочу чтобы sd показывалась в Nautilus

Petrovich_Vrag
() автор топика
Ответ на: комментарий от Petrovich_Vrag

А ты не подумал, что для этого, как минимум, нам необходимо знать, что это за кардридер?!

lnx ★
()
Ответ на: комментарий от AITap

[code] [179996.520617] sd 9:0:0:0: [sdb] Assuming drive cache: write through [179996.525859] sd 9:0:0:0: [sdb] Assuming drive cache: write through [179996.525869] sdb: sdb1 [179996.532360] sd 9:0:0:0: [sdb] Assuming drive cache: write through [179996.532366] sd 9:0:0:0: [sdb] Attached SCSI removable disk [179997.408512] SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts [180406.224395] usb 1-1: USB disconnect, address 13 [180463.630038] mmc0: error -110 whilst initialising SD card [180640.333026] mmc0: error -110 whilst initialising SD card [181340.087030] mmc0: error -110 whilst initialising SD card [/code]

Petrovich_Vrag
() автор топика
Ответ на: комментарий от Petrovich_Vrag

Да, я хочу чтобы sd показывалась в Nautilus

То есть после втыкания SD-карточки в ридер ничего не происходит?

Нужна следующая информация:

  • Версия дистрибутива.
  • Когда софт в последний раз обновлялся.
  • Модель SD-карточки.
  • uname -a
  • lspci -nn
  • lsusb
  • dmesg после втыкания карточки.
Deleted
()
Ответ на: комментарий от AITap 
ОС - Fedora 14 
Update вчера 
Transcend 512mb 
Linux localhost.localdomain 2.6.35.11-83.fc14.i686 #1 SMP Mon Feb 7 07:04:18 UTC 2011 i686 i686 i386 GNU/Linux
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02) 00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 01) 00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01) 00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01) 01:00.0 VGA compatible controller [0300]: nVidia Corporation G84 [GeForce 8600M GT] [10de:0407] (rev a1) 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12) 03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB360 AHCI Controller [197b:2360] (rev 02) 05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) 08:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) 08:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) 08:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12) 08:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12) Bus 005 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 005 Device 002: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 046d:c01e Logitech, Inc. MX518 Optical Mouse Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 009: ID 04e8:6761 Samsung Electronics Co., Ltd Bus 001 Device 004: ID 05e3:0503 Genesys Logic, Inc. Webcam Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Petrovich_Vrag
() автор топика

у меня так цеплялся

shty ★★★★★
()
Ответ на: комментарий от Petrovich_Vrag 
# dmesg | tail
[179996.520617] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[179996.525859] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[179996.525869]  sdb: sdb1
[179996.532360] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[179996.532366] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[179997.408512] SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
[180406.224395] usb 1-1: USB disconnect, address 13
[180463.630038] mmc0: error -110 whilst initialising SD card
[180640.333026] mmc0: error -110 whilst initialising SD card
[181340.087030] mmc0: error -110 whilst initialising SD card
[root@localhost bin]# uname -a
Linux localhost.localdomain 2.6.35.11-83.fc14.i686 #1 SMP Mon Feb 7 07:04:18 UTC 2011 i686 i686 i386 GNU/Linux
[root@localhost bin]# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01)
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 01)
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G84 [GeForce 8600M GT] [10de:0407] (rev a1)
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB360 AHCI Controller [197b:2360] (rev 02)
05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)
08:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
08:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
08:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
08:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
[root@localhost bin]# lsusb
Bus 005 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 005 Device 002: ID 0b05:1712 ASUSTek Computer, Inc. BT-183 Bluetooth 2.0+EDR adapter
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046d:c01e Logitech, Inc. MX518 Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 009: ID 04e8:6761 Samsung Electronics Co., Ltd 
Bus 001 Device 004: ID 05e3:0503 Genesys Logic, Inc. Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Разобрался)

Petrovich_Vrag
() автор топика
Ответ на: комментарий от Petrovich_Vrag

Ошибка 110 - это /* Connection timed out */, обычно, когда нет электрического контакта.
Попробуй перезагрузить подули

 $modprobe -r sdhci
$modprobe -r mmc_core
$modprobe mmc_core
$modprobe sdhci

fluorite ★★★★★
()
Ответ на: комментарий от Petrovich_Vrag

с правами рута. Анонимусы советуют также проделать следующую манипуляцию: 

setpci -s 08:01.1 0xCA=0x57 #Write Enable
setpci -s 08:01.1 0xCB=0x02 #MMC Disable
setpci -s 08:01.1 0xCA=0x00 #Write Disable

fluorite ★★★★★
()
Ответ на: комментарий от fluorite 
[root@localhost Загрузки]# setpci -s 08:01.1 0xCA=0x57 #Write Enable
setpci: Missing width.
Try `setpci --help' for more information.
[root@localhost Загрузки]# setpci -s 08:01.1 0xCB=0x02 #MMC Disable
setpci: Missing width.
Try `setpci --help' for more information.
[root@localhost Загрузки]# setpci -s 08:01.1 0xCA=0x00 #Write Disable
setpci: Missing width.
Try `setpci --help' for more information.
Petrovich_Vrag
() автор топика
Вы не можете добавлять комментарии в эту тему: топик перемещен в архив.
← Radeon 5770 fglrx 11.3 direct rendering: No
Linux-hardware
настройка тюнера →