LINUX.ORG.RU
решено Форум — Linux-hardware  

Не работает Ralink 3070 в Debian 9

 ,


0

4

В Арче проблема отсутствует. 

dmesg:
[  252.547207] IPv6: ADDRCONF(NETDEV_UP): wlx000db002eda2: link is not ready
[  254.423888] wlx000db002eda2: authenticate with f8:1a:67:14:31:2d
[  254.487578] wlx000db002eda2: send auth to f8:1a:67:14:31:2d (try 1/3)
[  254.490702] wlx000db002eda2: authenticated
[  259.492757] wlx000db002eda2: aborting authentication with f8:1a:67:14:31:2d by local choice (Reason: 3=DEAUTH_LEAVING)
[  261.136751] wlx000db002eda2: authenticate with f8:1a:67:14:31:2d
[  261.205466] wlx000db002eda2: send auth to f8:1a:67:14:31:2d (try 1/3)
[  261.207981] wlx000db002eda2: authenticated
[  268.261830] wlx000db002eda2: authenticate with f8:1a:67:14:31:2d
[  268.333373] wlx000db002eda2: send auth to f8:1a:67:14:31:2d (try 1/3)
[  268.336675] wlx000db002eda2: authenticated
[  273.334740] wlx000db002eda2: aborting authentication with f8:1a:67:14:31:2d by local choice (Reason: 3=DEAUTH_LEAVING)
[  275.886332] wlx000db002eda2: authenticate with f8:1a:67:14:31:2d
[  275.957477] wlx000db002eda2: send auth to f8:1a:67:14:31:2d (try 1/3)
[  275.960240] wlx000db002eda2: authenticated
[  278.003445] wlx000db002eda2: aborting authentication with f8:1a:67:14:31:2d by local choice (Reason: 3=DEAUTH_LEAVING)
[  278.042932] IPv6: ADDRCONF(NETDEV_UP): wlx000db002eda2: link is not ready
[  278.971240] IPv6: ADDRCONF(NETDEV_UP): wlx000db002eda2: link is not ready

Лог Network-manager:
Июл 21 21:09:41  NetworkManager[410]: <info>  [1500660581.1364] device (wlx000db002eda2): Activation: starting connection '' (c23f96e0-a7ca-40b9-9ef2-b81b08d80cdf)
Июл 21 21:09:41  NetworkManager[410]: <info>  [1500660581.3157] audit: op="connection-activate" uuid="c23f96e0-a7ca-40b9-9ef2-b81b08d80cdf" name="" pid=1016 uid=1000 result="success"
Июл 21 21:09:41  NetworkManager[410]: <info>  [1500660581.3165] device (wlx000db002eda2): state change: disconnected -> prepare (reason 'none') [30 40 0]
Июл 21 21:09:41  NetworkManager[410]: <info>  [1500660581.8257] device (wlx000db002eda2): set-hw-addr: reset MAC address to 00:0D:B0:02:ED:A2 (preserve)
Июл 21 21:09:42  NetworkManager[410]: <info>  [1500660582.2789] device (wlx000db002eda2): state change: prepare -> config (reason 'none') [40 50 0]
Июл 21 21:09:42  NetworkManager[410]: <info>  [1500660582.2800] device (wlx000db002eda2): Activation: (wifi) access point '' has security, but secrets are required.
Июл 21 21:09:42  NetworkManager[410]: <info>  [1500660582.2801] device (wlx000db002eda2): state change: config -> need-auth (reason 'none') [50 60 0]
Июл 21 21:09:42  NetworkManager[410]: <info>  [1500660582.3979] device (wlx000db002eda2): state change: need-auth -> prepare (reason 'none') [60 40 0]
Июл 21 21:09:42  NetworkManager[410]: <info>  [1500660582.4064] device (wlx000db002eda2): state change: prepare -> config (reason 'none') [40 50 0]
Июл 21 21:09:42  NetworkManager[410]: <info>  [1500660582.4084] device (wlx000db002eda2): Activation: (wifi) connection '' has security, and secrets exist.  No new secrets needed.
Июл 21 21:09:42  NetworkManager[410]: <info>  [1500660582.4092] Config: added 'ssid' value ''
Июл 21 21:09:42  NetworkManager[410]: <info>  [1500660582.4317] Config: added 'scan_ssid' value '1'
Июл 21 21:09:42  NetworkManager[410]: <info>  [1500660582.4318] Config: added 'key_mgmt' value 'WPA-PSK'
Июл 21 21:09:42  NetworkManager[410]: <info>  [1500660582.4319] Config: added 'psk' value '<hidden>'
Июл 21 21:09:42  NetworkManager[410]: <info>  [1500660582.6336] device (wlx000db002eda2): supplicant interface state: inactive -> scanning
Июл 21 21:09:44  NetworkManager[410]: <info>  [1500660584.2165] device (wlx000db002eda2): supplicant interface state: scanning -> authenticating
Июл 21 21:09:49  NetworkManager[410]: <info>  [1500660589.2643] device (wlx000db002eda2): supplicant interface state: authenticating -> disconnected
Июл 21 21:09:49  NetworkManager[410]: <info>  [1500660589.3644] device (wlx000db002eda2): supplicant interface state: disconnected -> scanning
Июл 21 21:09:50  NetworkManager[410]: <info>  [1500660590.9410] device (wlx000db002eda2): supplicant interface state: scanning -> authenticating
Июл 21 21:09:55  NetworkManager[410]: <info>  [1500660595.9959] device (wlx000db002eda2): supplicant interface state: authenticating -> disconnected
Июл 21 21:09:56  NetworkManager[410]: <info>  [1500660596.4964] device (wlx000db002eda2): supplicant interface state: disconnected -> scanning
Июл 21 21:09:58  NetworkManager[410]: <info>  [1500660598.0631] device (wlx000db002eda2): supplicant interface state: scanning -> authenticating
Июл 21 21:10:03  NetworkManager[410]: <info>  [1500660603.1043] device (wlx000db002eda2): supplicant interface state: authenticating -> disconnected
Июл 21 21:10:04  NetworkManager[410]: <info>  [1500660604.1054] device (wlx000db002eda2): supplicant interface state: disconnected -> scanning
Июл 21 21:10:05  NetworkManager[410]: <info>  [1500660605.6869] device (wlx000db002eda2): supplicant interface state: scanning -> authenticating
Июл 21 21:10:07  NetworkManager[410]: <warn>  [1500660607.7302] device (wlx000db002eda2): Activation: (wifi) association took too long, failing activation
Июл 21 21:10:07  NetworkManager[410]: <info>  [1500660607.7303] device (wlx000db002eda2): state change: config -> failed (reason 'ssid-not-found') [50 120 53]
Июл 21 21:10:07  NetworkManager[410]: <warn>  [1500660607.7620] device (wlx000db002eda2): Activation: failed for connection ''
Июл 21 21:10:07  NetworkManager[410]: <info>  [1500660607.7645] device (wlx000db002eda2): state change: failed -> disconnected (reason 'none') [120 30 0]
Июл 21 21:10:08  NetworkManager[410]: <info>  [1500660608.2292] device (wlx000db002eda2): set-hw-addr: set MAC address to 42:C2:99:B3:3B:15 (scanning)
Июл 21 21:10:08  NetworkManager[410]: <warn>  [1500660608.7075] sup-iface[0x55b5e4d2ce60,wlx000db002eda2]: connection disconnected (reason -3)
Июл 21 21:10:08  NetworkManager[410]: <info>  [1500660608.7087] device (wlx000db002eda2): supplicant interface state: authenticating -> disconnected

Лог wpa_supplicant:
Июл 21 21:05:51  wpa_supplicant[474]: Successfully initialized wpa_supplicant
Июл 21 21:09:44  wpa_supplicant[474]: wlx000db002eda2: SME: Trying to authenticate with f8:1a:67:14:31:2d (SSID='' freq=2462 MHz)
Июл 21 21:09:50  wpa_supplicant[474]: wlx000db002eda2: SME: Trying to authenticate with f8:1a:67:14:31:2d (SSID='' freq=2462 MHz)
Июл 21 21:09:55  wpa_supplicant[474]: wlx000db002eda2: SME: Deauth request to the driver failed
Июл 21 21:09:57  wpa_supplicant[474]: wlx000db002eda2: SME: Trying to authenticate with f8:1a:67:14:31:2d (SSID='' freq=2462 MHz)
Июл 21 21:10:05  wpa_supplicant[474]: wlx000db002eda2: SME: Trying to authenticate with f8:1a:67:14:31:2d (SSID='' freq=2462 MHz)
Июл 21 21:10:07  wpa_supplicant[474]: wlx000db002eda2: CTRL-EVENT-DISCONNECTED bssid=f8:1a:67:14:31:2d reason=3 locally_generated=1



Последнее исправление: hubcap (всего исправлений: 1)

Я отказываюсь читать ЭТО.

Как исправить уже написали выше.

r3lgar ★★★★★
()

Скорее всего, не установлен пакет с прошивкой (firmware) для этой карты. Особенно учитывая что это дебиан.

curufinwe ★★★★★
()
Ответ на: комментарий от curufinwe

Это из олдстейбла(я эту прошивку тоже пробовал). В текующем стабильном прошивна находится в firmware-linux-nonfree, который подтянулся за firmware-linux. Судя по dmesg(в теме не указано), прошивка грузится успешно 

[   12.812044] usb 5-7: reset high-speed USB device number 3 using ehci-pci
[   12.970499] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[   12.998748] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[   13.070874] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.071407] usbcore: registered new interface driver rt2800usb
[   13.187403] rt2800usb 5-7:1.0 wlx000db002eda2: renamed from wlan0
[   13.280061] floppy0: no floppy controllers found
[   13.840738] Adding 1992700k swap on /dev/sda2.  Priority:-1 extents:1 across:1992700k FS
[   19.111192] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   19.111529] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   19.111600] atl2: enp2s0 NIC Link is Up<100 Mbps Full Duplex>
[   19.111616] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   19.150503] IPv6: ADDRCONF(NETDEV_UP): wlx000db002eda2: link is not ready
[   19.150594] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[   19.207567] rt2800usb 5-7:1.0: firmware: direct-loading firmware rt2870.bin
[   19.207579] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[   19.687079] IPv6: ADDRCONF(NETDEV_UP): wlx000db002eda2: link is not ready
[   20.607080] IPv6: ADDRCONF(NETDEV_UP): wlx000db002eda2: link is not ready
[   21.998579] IPv6: ADDRCONF(NETDEV_UP): wlx000db002eda2: link is not ready

hubcap
() автор топика
Ответ на: комментарий от hubcap

Странно то, что грузится прошивка 2870, а не 3070, хотя она тоже в этом пакете есть. Есть возможность в арче снять тот же лог?

curufinwe ★★★★★
()
Последнее исправление: curufinwe (всего исправлений: 1)
Ответ на: комментарий от curufinwe

А, понял. rt3070.bin это просто симлинк на rt2870.bin. Получается, что с этим все нормально.

curufinwe ★★★★★
()
Ответ на: комментарий от ving2 
add this to /etc/NetworkManager/NetworkManager.conf
per bug #835553

[device]
wifi.scan-rand-mac-address=no

Вот это помогло. Спасибо.

hubcap
() автор топика
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
Linux-hardware