LINUX.ORG.RU

изменить частоту кулера на ноуте

 , , ,


0

3

Доброго дня Не получилось наладить управление курером ноута. Ниже листинг ...из последеней строчки я так понял управления кулером мне не видать...верно?? под Виндой кулер работает нормально.

mainuser@mainUserF5Z:/home/user$ sudo sensors-detect # sensors-detect revision 6284 (2015-05-31 14:00:33 +0200) # System: ASUSTeK Computer Inc. F5Z [1.0] (laptop) # Kernel: 4.8.0-22-generic i686 # Processor: AMD Athlon(tm) X2 Dual-Core QL-60 (17/3/1)

This program will help you determine which kernel modules you need to load to use lm_sensors most effectively. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors. Do you want to scan for them? This is totally safe. (YES/no): y Module cpuid loaded successfully. Silicon Integrated Systems SIS5595... No VIA VT82C686 Integrated Sensors... No VIA VT8231 Integrated Sensors... No AMD K8 thermal sensors... No AMD Family 10h thermal sensors... No AMD Family 11h thermal sensors... Success! (driver `k10temp') AMD Family 12h and 14h thermal sensors... No AMD Family 15h thermal sensors... No AMD Family 16h thermal sensors... No AMD Family 15h power sensors... No AMD Family 16h power sensors... No Intel digital thermal sensor... No Intel AMB FB-DIMM thermal sensor... No Intel 5500/5520/X58 thermal sensor... No VIA C7 thermal sensor... No VIA Nano thermal sensor... No

Some Super I/O chips contain embedded sensors. We have to write to standard I/O ports to probe them. This is usually safe. Do you want to scan for Super I/O sensors? (YES/no): y Probing for Super-I/O at 0x2e/0x2f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No Probing for Super-I/O at 0x4e/0x4f Trying family `National Semiconductor/ITE'... No Trying family `SMSC'... No Trying family `VIA/Winbond/Nuvoton/Fintek'... No Trying family `ITE'... No

Some hardware monitoring chips are accessible through the ISA I/O ports. We have to write to arbitrary I/O ports to probe them. This is usually safe though. Yes, you do have ISA I/O ports even if you do not have any ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y Probing for `National Semiconductor LM78' at 0x290... No Probing for `National Semiconductor LM79' at 0x290... No Probing for `Winbond W83781D' at 0x290... No Probing for `Winbond W83782D' at 0x290... No

Lastly, we can probe the I2C/SMBus adapters for connected hardware monitoring devices. This is the most risky part, and while it works reasonably well on most systems, it has been reported to cause trouble on some systems. Do you want to probe the I2C/SMBus adapters now? (YES/no): y Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus

Next adapter: Radeon i2c bit bus 0x90 (i2c-0) Do you want to scan it? (yes/NO/selectively): y

Next adapter: Radeon i2c bit bus 0x91 (i2c-1) Do you want to scan it? (yes/NO/selectively): y

Next adapter: Radeon i2c bit bus 0x92 (i2c-2) Do you want to scan it? (yes/NO/selectively): y Next adapter: Radeon i2c bit bus 0x93 (i2c-3) Do you want to scan it? (yes/NO/selectively): y

Next adapter: Radeon i2c bit bus 0x14 (i2c-4) Do you want to scan it? (yes/NO/selectively): y

Next adapter: SMBus PIIX4 adapter at 0b00 (i2c-5) Do you want to scan it? (YES/no/selectively): y Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip) Probing for `EDID EEPROM'... No Client found at address 0x51 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No Probing for `SPD EEPROM'... Yes (confidence 8, not a hardware monitoring chip)

Now follows a summary of the probes I have just done. Just press ENTER to continue:

Driver `k10temp' (autoloaded): * Chip `AMD Family 11h thermal sensors' (confidence: 9)

No modules to load, skipping modules configuration.

Unloading cpuid... OK

mainuser@mainUserF5Z:/home/user$ sudo systemctl enable lm_sensors default Failed to enable unit: No such file or directory

mainuser@mainUserF5Z:/home/user$ sudo systemctl start lm_sensors Failed to start lm_sensors.service: Unit lm_sensors.service not found.

mainuser@mainUserF5Z:/home/user$ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +69.0°C (crit = +108.0°C)

k10temp-pci-00c3 Adapter: PCI adapter temp1: +68.6°C (high = +70.0°C)

mainuser@mainUserF5Z:/home/user$ sudo pwmconfig # pwmconfig revision 6243 (2014-03-20) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm.

We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed.

/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed

заранее спасибо за ответ)

изменить частоту кулера на ноуте

Нет. Портянку без форматирования даже читать не стал.

anonymous ()

Пользуйся разметкой

ZERG ★★★★★ ()

чё за ад, как это читать? Какой ноут? Гуглить запросом «название_ноута pwmconfig/fancontrol» пробовал?

mahalaka ★★ ()
Ответ на: комментарий от mahalaka

Спасибо за "название_ноута pwmconfig/fancontrol"...появились варианты

прошу прощение за форматирование...за его отсутствие.

не знал как из терминала передать в форуме листинг терминала...(хотя пока и не знаю как делать вот так например:Проблема с заходом на сервер по ключу )

...читаю описание разметки.

sokol_syb ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.