LINUX.ORG.RU

проблема с pptpd


0

0

вот лог. НА клиенсткой машине вылитает при сообщении "регистрация компьюетра в сети" May 29 12:22:31 [pptpd] CTRL: Client 10.250.16.12 control connection finished May 29 12:22:33 [pptpd] MGR: Max connections reached, extra IP addresses ignored May 29 12:22:33 [pptpd] MGR: Manager process started May 29 12:22:33 [pptpd] MGR: Maximum of 100 connections available May 29 12:22:48 [pptpd] CTRL: Client 192.168.0.3 control connection started May 29 12:22:48 [pptpd] CTRL: Starting call (launching pppd, opening GRE) May 29 12:22:48 [pppd] Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. May 29 12:22:48 [pppd] pppd 2.4.2 started by root, uid 0 May 29 12:22:48 [pppd] Using interface ppp0 May 29 12:22:48 [pppd] Connect: ppp0 <--> /dev/pts/0 May 29 12:22:48 [pptpd] GRE: Bad checksum from pppd. May 29 12:22:51 [pptpd] CTRL: Ignored a SET LINK INFO packet with real ACCMs! May 29 12:22:51 [pppd] found interface eth1 for proxy arp May 29 12:22:51 [pppd] local IP address 192.168.0.1 May 29 12:22:51 [pppd] remote IP address 192.168.0.3 May 29 12:22:51 [pppd] IPCP terminated by peer (E`^EN^@<M-Mt^@^@^@4) May 29 12:22:52 [pppd] LCP terminated by peer (E`^EN^@<M-Mt^@^@^@^@) May 29 12:22:55 [pppd] Connection terminated. May 29 12:22:55 [pppd] Connect time 0.1 minutes. May 29 12:22:55 [pppd] Sent 223508 bytes, received 117 bytes. May 29 12:22:55 [pppd] tcflush failed: Input/output error May 29 12:22:55 [pppd] Connect time 0.1 minutes. May 29 12:22:55 [pppd] Sent 223508 bytes, received 117 bytes. May 29 12:22:55 [pppd] Exit.

anonymous

Re: проблема с pptpd

Когда сообщение напишешь, то над кнопочкой "Post / Отправить", в выпадающем списке поставть "User line breaks". А то вот это прочитать нереально.

kuz ()

Re: проблема с pptpd

Ваще ругается на то что пара логин/пароль неправильная, хотя это может быть и не только ЭТО :)

cat /etc/pptpd.conf в студию покажи

gizmo ()
Ответ на: Re: проблема с pptpd от gizmo

Re: проблема с pptpd

###############################################################################
# $Id: pptpd.conf,v 1.8 2004/04/28 11:36:07 quozl Exp $
#
# Sample Poptop configuration file /etc/pptpd.conf
#
# Changes are effective when pptpd is restarted.
###############################################################################

# TAG: ppp
#Path to the pppd program, default '/usr/sbin/pppd' on Linux
#
ppp /usr/sbin/pppd

# TAG: option
#Specifies the location of the PPP options file.
#By default PPP looks in '/etc/ppp/options'
#
option /etc/ppp/options.pptpd

# TAG: debug
#Turns on (more) debugging to syslog
#
#debug

# TAG: stimeout
#Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10

# TAG: noipparam
# Suppress the passing of the client's IP address to PPP, which is
# done by default otherwise.
#
#noipparam

# TAG: logwtmp
#Use wtmp(5) to record client connections and disconnections.
#
logwtmp

# TAG: bcrelay <if>
#Turns on broadcast relay to clients from interface <if>
#
#bcrelay eth1

# TAG: localip
# TAG: remoteip
#Specifies the local and remote IP address ranges.
#
# Any addresses work as long as the local machine takes care of the
# routing. But if you want to use MS-Windows networking, you should
# use IP addresses out of the LAN address space and use the proxyarp
# option in the pppd options file, or run bcrelay.
#
#You can specify single IP addresses seperated by commas or you can
#specify ranges, or both. For example:
#
#192.168.0.234,192.168.0.245-249,192.168.0.254
#
#IMPORTANT RESTRICTIONS:
#
#1. No spaces are permitted between commas or within addresses.
#
#2. If you give more IP addresses than MAX_CONNECTIONS, it will
# start at the beginning of the list and go until it gets
# MAX_CONNECTIONS IPs. Others will be ignored.
#
#3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
# you must type 234-238 if you mean this.
#
#4. If you give a single localIP, that's ok - all local IPs will
# be set to the given one. You MUST still give at least one remote
# IP for each simultaneous client.
#
# (Recommended)
localip 192.168.0.1
remoteip 192.168.0.2-255
# or
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.245

anonymous ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.