проблема с pptpd

Когда сообщение напишешь, то над кнопочкой "Post / Отправить", в выпадающем списке поставть "User line breaks". А то вот это прочитать нереально.

Ваще ругается на то что пара логин/пароль неправильная, хотя это может быть и не только ЭТО :)

cat /etc/pptpd.conf в студию покажи

###############################################################################
# $Id: pptpd.conf,v 1.8 2004/04/28 11:36:07 quozl Exp $
#
# Sample Poptop configuration file /etc/pptpd.conf
#
# Changes are effective when pptpd is restarted.
###############################################################################

# TAG: ppp
#Path to the pppd program, default '/usr/sbin/pppd' on Linux
#
ppp /usr/sbin/pppd

# TAG: option
#Specifies the location of the PPP options file.
#By default PPP looks in '/etc/ppp/options'
#
option /etc/ppp/options.pptpd

# TAG: debug
#Turns on (more) debugging to syslog
#
#debug

# TAG: stimeout
#Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10

# TAG: noipparam
# Suppress the passing of the client's IP address to PPP, which is
# done by default otherwise.
#
#noipparam

# TAG: logwtmp
#Use wtmp(5) to record client connections and disconnections.
#
logwtmp

# TAG: bcrelay <if>
#Turns on broadcast relay to clients from interface <if>
#
#bcrelay eth1

# TAG: localip
# TAG: remoteip
#Specifies the local and remote IP address ranges.
#
# Any addresses work as long as the local machine takes care of the
# routing. But if you want to use MS-Windows networking, you should
# use IP addresses out of the LAN address space and use the proxyarp
# option in the pppd options file, or run bcrelay.
#
#You can specify single IP addresses seperated by commas or you can
#specify ranges, or both. For example:
#
#192.168.0.234,192.168.0.245-249,192.168.0.254
#
#IMPORTANT RESTRICTIONS:
#
#1. No spaces are permitted between commas or within addresses.
#
#2. If you give more IP addresses than MAX_CONNECTIONS, it will
# start at the beginning of the list and go until it gets
# MAX_CONNECTIONS IPs. Others will be ignored.
#
#3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
# you must type 234-238 if you mean this.
#
#4. If you give a single localIP, that's ok - all local IPs will
# be set to the given one. You MUST still give at least one remote
# IP for each simultaneous client.
#
# (Recommended)
localip 192.168.0.1
remoteip 192.168.0.2-255
# or
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.245