LINUX.ORG.RU

SUSE - SyncMaster700NF - 75HZ


0

0

Вот наконец скачал 7 гб Сусе 9 ))) установил его и.... был неприятно удивлён, где в ясте не ковырял - нигде не смог ему обьяснить чтобы мой моник Samsung SyncMaster 700NF при разрешении 1152х864 работал с частотой 100 герц... хотя в лайвэвале получалось... я сразу подумал что нужно что-то подправить в XF86Config, но что? Обьясните плиз. только если можно по-подробнее, ведь я только начал разбираться... Кстати, видюха - ATI Radeon 9000

мой XF86Config:

# /.../
# SaX generated XFree86 config file
# Created on: 2004-01-19T16:59:51-0800.
#
# Version: 4.7
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (4.7)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "RandR" "on"
EndSection

Section "Module"
Load "freetype"
Load "type1"
Load "dbe"
Load "extmod"
Load "glx"
Load "speedo"
Load "dri"
Load "v4l"
EndSection

Section "InputDevice"
Driver "Keyboard"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Device" "/dev/mouse"
Option "Emulate3Buttons" "on"
Option "Name" "Autodetection"
Option "Protocol" "ps/2"
Option "Vendor" "Sysp"
EndSection

Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
DisplaySize 320 240
HorizSync 30-96
Identifier "Monitor[0]"
ModelName "SYNCMASTER 700NF"
Option "DPMS"
VendorName "SAMSUNG"
VertRefresh 50-160
UseModes "Modes[0]"
EndSection

Section "Modes"
Identifier "Modes[0]"
Modeline "1024x768" 131.43 1024 1096 1208 1392 768 769 772 821
Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
Modeline "1024x768" 131.43 1024 1096 1208 1392 768 769 772 821
EndSection

Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

Section "Device"
BoardName "Radeon 9000"
Driver "radeon"
Identifier "Device[0]"
Screen 0
Option "Rotate" "off"
VendorName "ATI"
EndSection

Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

Re: SUSE - SyncMaster700NF - 75HZ

У тебя при старте Х-ы грузятся???

Если да, то надо сделать так чтобы ты попадал в текстовый режим...

Это избавит в дальнейшем от возможных проблем при установке.

Не знаю как для Suse 9, а для RedHat/Fedora/Slackware, достаточно изменить значение в файле /etc/inittab в строке:

id:5:initdefault:

c 5 - (графический режим) на 3 - (текстовый режим), ну и перегрузится...

P.S. Советую поискать на этом сайте как в Suse включить текстовый режим...

anonymous ()
Ответ на: Re: SUSE - SyncMaster700NF - 75HZ от MindKeeper

Re: Re: SUSE - SyncMaster700NF - 75HZ

дальше читаем XTimings-HOWTO в сторону выставления ModeLine. Или же где-либо достаем нужный этот самый ModeLine (другой анонимус)

anonymous ()
Ответ на: Re: Re: SUSE - SyncMaster700NF - 75HZ от anonymous

Re: Re: Re: SUSE - SyncMaster700NF - 75HZ

В текстовый режим я установил давно. ModeLine это типа Frequency Range? У меня в меню монитора написано :

Frequency Range: H: 30 - 96 kHz V: 50 - 160 Hz

Recommended Timing 1280x1024 / 85 Hz

Serial Munber ...

Maximum Refresh Rate: (based on VESA GTF)

640x480 / 160 800x600 / 146 1024x768 / 116 1152x864 / 104 1280x1024 / 89 1600x1200 / 76

Optional Features: ...

Home Page ...

MindKeeper ()

Re: SUSE - SyncMaster700NF - 75HZ

Далее устанавливаешь драйвера:

rpm -Uvh fglrx-glc22-4.3.0-3.7.0.i386.rpm

После чего завускаешь:

fglrxconfig

и отвечаешь на вопросы которые он тебе задает (Более подробно: http://www2.ati.com/drivers/linux/readme0370.txt)

Не забудь на всякий случай сохранить старый конфиг от X-ов (это файл XF86Config)...

После пробуешь запустить...

startx

anonymous ()
Ответ на: Re: SUSE - SyncMaster700NF - 75HZ от anonymous

Re: Re: SUSE - SyncMaster700NF - 75HZ

Запустил РПМ... вот что вышло:

core:/mnt/win1/Temp/Download # rpm -i fglrx-glc22-4.3.0-3.7.0.i386.rpm
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
warning: user mtippett does not exist - using root
warning: group mtippett does not exist - using root
*** Trying to install a precompiled kernel module.
*** WARNING ***
Tailored kernel module for fglrx not present in your system.
You must go to /lib/modules/fglrx/build_mod subdir
and execute './make.sh' to build a fully customed kernel module.
Afterwards go to /lib/modules/fglrx and run './make_install.sh'
in order to install the module into your kernel's module repository.
(see readme.txt for more details.)

As of now you can still run your XServer in 2D, but hardware acclerated
OpenGL will not work and 2D graphics will lack performance.

failed.
*** Error: no kernel module build environment - please consult readme.
/sbin/ldconfig: File /usr/X11R6/lib/FGL.renamed.libGL.so.1.2 is too small, not checked.
Installed: qt3 (gcc 3.2) based control panel application
===
ATI display drivers successfully installed
please run 'fglrxconfig' now
===

Потом суды по соощениям пошёл в /lib/modules/fglrx/build_mod, набрал ./make.sh а он мне:

core:~ # cd /lib/modules/fglrx/build_mod/
core:/lib/modules/fglrx/build_mod # ./make.sh
ATI module generator V 2.0
==========================
initializing...
kernel includes at /usr/src/linux/include not found or incomplete
file: /usr/src/linux/include/linux/version.h
core:/lib/modules/fglrx/build_mod #

эхх... забыл я что не скачал исходники ядра... думал не понадобятся... чтож щас буду докачивать и пробовать... кстати где-то слышал что на "родное" ядро сусе драйвера ати не ставятся правильно это правда?

MindKeeper ()

Re: SUSE - SyncMaster700NF - 75HZ

Насчет того что они не ставятся, не слышал...

А исходники у тебя должны быть на одном из дисков.
Пакет: kernel-source.....rpm, или что-то типа того...

anonymous ()

Re: SUSE - SyncMaster700NF - 75HZ

Попробуй запустить fglrxconfig у этих драйверов есть встроенный драйвер...

Ты сейчас пытешься собирать внешний...

anonymous ()
Ответ на: Re: Re: SUSE - SyncMaster700NF - 75HZ от MindKeeper

Re: Re: Re: SUSE - SyncMaster700NF - 75HZ

Дрова дровами, а вот строчку Modeline они за тебя не напишут. В комплект X'ов входит утилитка 'gtf' запускай её типа так: 'gtf 1152x864_100' , далее то что она выдаст вставляешь в свой xf86config-4. И исправь либо в секции Screen: Modes "1152x864" "1024x768" "800x600" "640x480" на Modes "1152x864_100" "1024x768" "800x600" "640x480" либо в секции Modes переименуй "1152x864_100" на "1152x864". Для примера мои Modeline'ы от Samsung 757NF. ModeLine "640x480" 52.41 640 680 744 848 480 481 484 515 -hsync +vsync ModeLine "800x600" 83.92 800 860 948 1088 600 601 604 643 -hsync +vsync ModeLine "1024x768" 132.44 1024 1100 1212 1392 768 769 772 814 -hsync +vsync ModeLine "1152x864" 149.15 1152 1236 1364 1568 864 865 868 915 -hsync +vsync ModeLine "1280x960" 165.85 1280 1376 1512 1744 960 961 964 1008 -hsync +vsync

anonymous ()
Ответ на: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ от anonymous

Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ

XF86Config-4:

# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
# Option "omit xfree86-dga"
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"

# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
# FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

MindKeeper ()
Ответ на: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ от MindKeeper

Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5 - 68.7
VertRefresh 50 - 70
Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

MindKeeper ()
Ответ на: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ от MindKeeper

Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ


Section "Device"
Identifier "ATI Graphics Adapter"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "fglrx"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:1" # vendor=1002, device=496e
Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"

Subsection "Display"
Depth 24
Modes "1152x864_100"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

MindKeeper ()
Ответ на: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ от MindKeeper

Re: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ

# File: XF86Config-4

# ********************************************************************** # DRI Section # ********************************************************************** Section "dri" Mode 0666 EndSection

# ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # **********************************************************************

Section "Module" Load "dbe" SubSection "extmod" # Option "omit xfree86-dga" EndSubSection Load "type1" Load "freetype" Load "speedo" Load "glx" # libglx.a Load "dri" # libdri.a

EndSection

# ********************************************************************** # Files section. This allows default font and rgb paths to be set # **********************************************************************

Section "Files"

RgbPath "/usr/X11R6/lib/X11/rgb"

FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/local" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/URW" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1" FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/kwintv" FontPath "/usr/X11R6/lib/X11/fonts/truetype" FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/CID" FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1" FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/xtest" ModulePath "/usr/X11R6/lib/modules" EndSection

# ********************************************************************** # Server flags section. # **********************************************************************

Section "ServerFlags"

EndSection

# ********************************************************************** # Input devices # **********************************************************************

anonymous ()
Ответ на: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ от MindKeeper

Re: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ

File: XF86Config-4

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
	Mode 0666
EndSection

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************

Section "Module"
	Load "dbe" 
	SubSection "extmod"
	#	Option "omit xfree86-dga"
	EndSubSection
	Load "type1"
	Load "freetype"
	Load "speedo"
	Load "glx" # libglx.a
	Load "dri" # libdri.a

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

	RgbPath "/usr/X11R6/lib/X11/rgb"

	FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/local"
	FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/Type1"
	FontPath "/usr/X11R6/lib/X11/fonts/URW"
	FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
	FontPath "/usr/X11R6/lib/X11/fonts/PEX"
	FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
	FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
	FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
	FontPath "/usr/X11R6/lib/X11/fonts/truetype"
	FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/CID"
	FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
	FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
	FontPath "/usr/X11R6/lib/X11/fonts/xtest" 
	
	ModulePath "/usr/X11R6/lib/modules"
EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

EndSection

anonymous ()
Ответ на: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ от MindKeeper

Re: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

	Identifier "Keyboard1"
	Driver "Keyboard"
	Option "XkbRules" "xfree86"
	Option "XkbModel" "pc104"
	Option "XkbLayout" "us,ru"
	Option "XkbVariant" "winkeys"
	Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"
	Identifier "Mouse1"
	Driver "mouse"
	Option "Protocol" "ImPS/2"
	Option "ZAxisMapping" "4 5"
	Option "Device" "/dev/mouse"
EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
	Identifier "Monitor0"
	ModelName "SYNCMASTER 700NF"
	VendorName "SAMSUNG"
	HorizSync 30 - 90
	VertRefresh 50 - 160
	Option "DPMS"
	Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
EndSection

anonymous ()
Ответ на: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ от MindKeeper

Re: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ

# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
	Identifier "ATI Graphics Adapter"
	VendorName "ATI"
	BoardName "ATI Radeon 9000"
	Driver "fglrx"
	# ### generic DRI settings ###
	# === disable PnP Monitor ===
	#Option "NoDDC" "no"
	# === disable/enable XAA/DRI ===
	Option "no_accel" "no"
	Option "no_dri" "no"
	# === misc DRI settings ===
	Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
	# ### FireGL DDX driver module specific settings ###
	# === Screen Management ===
	Option "DesktopSetup" "0x00000000"
	Option "MonitorLayout" "AUTO, AUTO"
	Option "IgnoreEDID" "off"
	Option "HSync2" "unspecified"
	Option "VRefresh2" "unspecified"
	Option "ScreenOverlap" "0"
	# === TV-out Management ===
	Option "NoTV" "yes"
	Option "TVStandard" "NTSC-M"
	Option "TVHSizeAdj" "0"
	Option "TVVSizeAdj" "0"
	Option "TVHPosAdj" "0"
	Option "TVVPosAdj" "0"
	Option "TVHStartAdj" "0"
	Option "TVColorAdj" "0"
	Option "GammaCorrectionI" "0x06419064"
	Option "GammaCorrectionII" "0x00000000"
	# === OpenGL specific profiles/settings ===
	Option "Capabilities" "0x00000000"
	# === Video Overlay for the Xv extension ===
	Option "VideoOverlay" "on"
	# === OpenGL Overlay ===
	# Note: When OpenGL Overlay is enabled, Video Overlay
	# will be disabled automatically
	Option "OpenGLOverlay" "off"
	# === Center Mode (Laptops only) ===
	Option "CenterMode" "off"
	# === Pseudo Color Visuals (8-bit visuals) ===
	Option "PseudoColorVisuals" "off"
	# === QBS Management ===
	Option "Stereo" "off"
	Option "StereoSyncEnable" "1"
	# === FSAA Management ===
	Option "FSAAEnable" "no"
	Option "FSAAScale" "1"
	Option "FSAADisableGamma" "no"
	Option "FSAACustomizeMSPos" "no"
	Option "FSAAMSPosX0" "0.000000"
	Option "FSAAMSPosY0" "0.000000"
	Option "FSAAMSPosX1" "0.000000"
	Option "FSAAMSPosY1" "0.000000"
	Option "FSAAMSPosX2" "0.000000"
	Option "FSAAMSPosY2" "0.000000"
	Option "FSAAMSPosX3" "0.000000"
	Option "FSAAMSPosY3" "0.000000"
	Option "FSAAMSPosX4" "0.000000"
	Option "FSAAMSPosY4" "0.000000"
	Option "FSAAMSPosX5" "0.000000"
	Option "FSAAMSPosY5" "0.000000"
	# === Misc Options ===
	Option "UseFastTLS" "0"
	Option "BlockSignalsOnLock" "on"
	Option "UseInternalAGPGART" "yes"
	Option "ForceGenericCPU" "no"
	BusID "PCI:1:0:0" # vendor=1002, device=496e
	Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
	Identifier "Screen0"
	Device "ATI Graphics Adapter"
	Monitor "Monitor0"
	DefaultDepth 24
	Subsection "Display"
		Depth 24
		Modes "1152x864"
		ViewPort 0 0 
	EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

Section "ServerLayout"
	Identifier "Server Layout"
	Screen "Screen0"
	InputDevice "Mouse1" "CorePointer"
	InputDevice "Keyboard1" "CoreKeyboard"
EndSection 

anonymous ()
Ответ на: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ от anonymous

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ

Hello.

А обьясните мне, нахера качать дрова для Radeon, если они уже есть в дистрибутиве. Если не ошибаюсь до nv350 включительно в 9 SuSE есть всё.

best regards..

eRazor ★★★ ()
Ответ на: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ от anonymous

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: SUSE - SyncMaster700NF - 75HZ

Иксы запустились )) за конфиг спасибо, но ТАКОГО разрешения я ещё не видел... я ввобще не думал что мой моник его может держать ))) (разрешение > 1600х1200)

MindKeeper ()
Ответ на: Re: SUSE - SyncMaster700NF - 75HZ от anonymous

Re: Re: SUSE - SyncMaster700NF - 75HZ

Да, но там только одна опция, если не менять XF86Config - 75 или 55 герц

MindKeeper ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.