LINUX.ORG.RU

OpenSUSE 10.3 x86_64 и GF 8500GT


0

0

Поставил драйвера NVIDIA, но в glxinfo следующее:
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
и т.д.

cat /etc/X11/xorg.conf

Section "ServerLayout"
Identifier "Layout[all]"
Screen "Screen[0]" 0 0
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
EndSection

Section "Files"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection

Section "InputDevice"
Identifier "Keyboard[0]"
Driver "kbd"
Option "Protocol" "Standard"
Option "XkbLayout" "us,ru"
Option "XkbModel" "microsoftpro"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
Option "XkbRules" "xfree86"
Option "XkbVariant" ",winkeys"
EndSection

Section "InputDevice"
Identifier "Mouse[1]"
Driver "mouse"
Option "Buttons" "9"
Option "Device" "/dev/input/mice"
Option "Name" "ImExPS/2 Generic Explorer Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Modes"
Identifier "Modes[0]"
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
EndSection

Section "Monitor"
Identifier "Monitor[0]"
VendorName "--> VESA"
ModelName "1024X768@60HZ"
UseModes "Modes[0]"
DisplaySize 305 229
HorizSync 31.0 - 48.0
VertRefresh 50.0 - 60.0
Option "CalcAlgorithm" "XServerPool"
Option "DPMS"
EndSection

Section "Device"
Identifier "Device[0]"
Driver "nvidia"
VendorName "NVidia"
BoardName "GeForce 8500 GT"
EndSection

Section "Screen"
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
DefaultDepth 24
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Disable"
EndSection


Re: OpenSUSE 10.3 x86_64 и GF 8500GT

в логах иксов
(II) NVIDIA dlloader X Driver 169.09 Fri Jan 11 14:07:11 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 05:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib64/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in


(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "RenderAccel" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at PCI:5:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 524288 kBytes
(--) NVIDIA(0): VideoBIOS: 60.86.39.00.68
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 8500 GT at PCI:5:0:0:
(--) NVIDIA(0): Philips 150C4 (CRT-1)
(--) NVIDIA(0): Philips 150C4 (CRT-1): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (86, 84); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfe9ff000 - 0xfe9ff0ff (0x100) MX[B]
[5] -1 0 0xfebf9000 - 0xfebf9fff (0x1000) MX[B]
[6] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[B]
[7] -1 0 0xfebfb000 - 0xfebfbfff (0x1000) MX[B]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[B]
[9] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[B]
[10] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B]
[11] -1 0 0xce000000 - 0xce000000 (0x1) MX[B](B)
[12] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[B](B)
[13] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000de00 - 0x0000deff (0x100) IX[B]
[20] -1 0 0x0000f000 - 0x0000f007 (0x8) IX[B]
[21] -1 0 0x0000f100 - 0x0000f10f (0x10) IX[B]
[22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[23] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[26] -1 0 0x0000f600 - 0x0000f60f (0x10) IX[B]
[27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[B]
[28] -1 0 0x00000970 - 0x00000977 (0x8) IX[B]
[29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[B]
[30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[B]
[31] -1 0 0x0000fb00 - 0x0000fb0f (0x10) IX[B]
[32] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[33] -1 0 0x0000ea00 - 0x0000eaff (0x100) IX[B]
[34] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[35] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[36] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[37] -1 0 0x00009f00 - 0x00009f7f (0x80) IX[B](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(WW) NVIDIA(0): Option "CalcAlgorithm" is not used

mi6gan ()

Re: OpenSUSE 10.3 x86_64 и GF 8500GT

дрова откуда брал?

sirota ()
Ответ на: Re: OpenSUSE 10.3 x86_64 и GF 8500GT от mi6gan

Re: OpenSUSE 10.3 x86_64 и GF 8500GT

Судя по xorg.conf ты при установке его не переписал (когда установщик в конце запрашивает чего-то типа - update your xorg.conf?, по умолчанию No).

sirota ()
Ответ на: Re: OpenSUSE 10.3 x86_64 и GF 8500GT от mi6gan

Re: OpenSUSE 10.3 x86_64 и GF 8500GT

У меня вот так:

Section "Device"

Identifier "Device[0]"

Driver "nvidia"

VendorName "VESA"

BoardName "Framebuffer Graphics"

EndSection

Section "Screen"

Identifier "Screen[0]"

Device "Device[0]"

Monitor "Monitor[0]"

SubSection "Display"

Modes "default"

EndSubSection

EndSection

Правда драйвер 171.06.

sirota ()

Re: OpenSUSE 10.3 x86_64 и GF 8500GT

А если ставить из нвидиевского репозитория? В Sax2 тупо нажмёшь на галочку "Activate 3D support". Или sax2 -r -m 0=nvidia

anonymous ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.