Установил arch на компьютер с видяшкой Radeon 9200. В процессе настройки столкнулся с такими проблемами:
- В /etc/X11/xorg.conf.d/20-radeon.conf, следуя арчвики, добавляю следующее:
Section "Device" Identifier "Radeon" Driver "radeon" EndSectionВ MODULES, для включения в режиме AGP, пишу:
MODULES="agpgart amd64_agp radeon"С такой конфигурацией при загрузке в логе иксов получаю ошибку:
и иксы не стартуют.[KMS] drm report modesetting isn't supported - Если не менять содержимое MODULES, а закоментировать строки в 20-radeon.conf то иксы запускаются используя xf86-video-fbdev и видеокарта работает в режиме AGP.
- Если закоментировать строку MODULES, а настройки в 20-radeon.conf оставить то иксы запускаются используя radeon но видеокарта запускается в режиме PCI(сообщения в dmesg
)
[drm:radeon_agp_init] *ERROR* Unable to acquire AGP: -19 [drm] Forcing AGP to PCI mode
Прям волк, коза и капуста( Может кто сталкивался с таким и может подсказать, что я делаю не так?
Вывод некоторых команд для 3й конфигурации:
lspci -k:
00:00.0 Host bridge: NVIDIA Corporation nForce3 250Gb Host Bridge (rev a1)
Subsystem: ASRock Incorporation Motherboard (one of many)
Kernel modules: amd64_agp
00:01.0 ISA bridge: NVIDIA Corporation nForce3 250Gb LPC Bridge (rev a2)
Subsystem: ASRock Incorporation Motherboard (one of many)
00:01.1 SMBus: NVIDIA Corporation nForce 250Gb PCI System Management (rev a1)
Subsystem: ASRock Incorporation Motherboard (one of many)
Kernel driver in use: nForce2_smbus
Kernel modules: i2c_nforce2
00:02.0 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1)
Subsystem: ASRock Incorporation Motherboard (one of many)
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:02.1 USB controller: NVIDIA Corporation CK8S USB Controller (rev a1)
Subsystem: ASRock Incorporation Motherboard (one of many)
Kernel driver in use: ohci-pci
Kernel modules: ohci_pci
00:02.2 USB controller: NVIDIA Corporation nForce3 EHCI USB 2.0 Controller (rev a2)
Subsystem: ASRock Incorporation Motherboard (one of many)
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:05.0 Bridge: NVIDIA Corporation CK8S Ethernet Controller (rev a2)
Subsystem: ASRock Incorporation Device 00df
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:06.0 Multimedia audio controller: NVIDIA Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
Subsystem: ASRock Incorporation Device 0850
Kernel driver in use: snd_intel8x0
Kernel modules: snd_intel8x0
00:08.0 IDE interface: NVIDIA Corporation CK8S Parallel ATA Controller (v2.5) (rev a2)
Subsystem: ASRock Incorporation Motherboard (one of many)
Kernel driver in use: pata_amd
Kernel modules: pata_amd, pata_acpi, ata_generic
00:0a.0 IDE interface: NVIDIA Corporation nForce3 Serial ATA Controller (rev a2)
Subsystem: ASRock Incorporation Motherboard (one of many)
Kernel driver in use: sata_nv
Kernel modules: sata_nv, pata_acpi, ata_generic
00:0b.0 PCI bridge: NVIDIA Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2)
Kernel modules: shpchp
00:0e.0 PCI bridge: NVIDIA Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2)
Kernel modules: shpchp
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Kernel driver in use: k8temp
Kernel modules: k8temp
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 PRO] (rev 01)
Subsystem: Hightech Information System Ltd. Excalibur Radeon 9250
Kernel driver in use: radeon
Kernel modules: radeon
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
Subsystem: Hightech Information System Ltd. Excalibur Radeon 9250 (Secondary)
dmesg -> http://pastebin.com/dEh2TkE8 Xorg.0.log -> http://pastebin.com/Pw69sBxM
