LINUX.ORG.RU

Suse Linux i Lucent Winmodem


0

0

Postavil pervii linux pol meseta nazat.
I do sih por ne razobralsea s dial-up -om

sledom idut Log KInternet -a:

SuSE Meta pppd (smpppd-ifcfg), Version 1.58 on linux.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Status is: connecting
pppd[0]: Plugin passwordfd.so loaded.
pppd[0]: --> WvDial: Internet dialer version 1.54.0
pppd[0]: --> Initializing modem.
pppd[0]: --> Sending: ATM1
pppd[0]: --> Sending: ATQ0
pppd[0]: --> Re-Sending: ATM1
pppd[0]: --> Modem not responding.
pppd[0]: Connect script failed
Status is: disconnected
pppd[0] died: Connect script failed (exit code 8)

i lspci

0000:00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev a2)
0000:00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
0000:00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
0000:00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
0000:00:02.2 USB Controller: nVidia Corporation CK8S USB Controller (rev a2)
0000:00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
0000:00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (rev a2)
0000:00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2)
0000:00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
0000:01:00.0 VGA compatible controller: nVidia Corporation NV40 [GeForce 6800 GT] (rev a1)
0000:02:08.0 Multimedia controller: Philips Semiconductors SAA713X Audio+video broadcast decoder (rev f0)
0000:02:09.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
0000:02:0a.0 Communication controller: Agere Systems (former Lucent Microelectronics) 56k WinModem (rev 01)
0000:02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)

Sistema na Suse 9.3
Pro6u pomo4i, sam ea dumaiu 6to eto s draiverom 4toto ne to.
No ne otkajusi ot mneniea profesionalov :)
(Nu nadoelo mne perezagrujatsea v windows 6tob naiti novuiu 
informatiiu po linuxu :( )

anonymous

Re: Suse Linux i Lucent Winmodem

0000:02:09.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
0000:02:0a.0 Communication controller: Agere Systems (former Lucent Microelectronics) 56k WinModem (rev 01)

У тебя 2 модема чтоль?
Если дрова нужны под Conexant - идешь на beta.acorp.ru, там есть дрова, и написано как нормальную скорость сделать.
Если под Lucent - не помню точно где, посмотри на linmodems.org

sabonez ★☆☆☆ ()
Ответ на: Re: Suse Linux i Lucent Winmodem от sabonez

Re: Suse Linux i Lucent Winmodem

>У тебя 2 модема чтоль? Da u menea 2 modema, lucent vzeal so starovo compa potomu 6to znal 4to suse evo potderjivaet, a konexant pri ustanovke daje ne obnarujilsea

No sposibo, idu probovati ~_-.

anonymous ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.