LINUX.ORG.RU

Помогите настроить 100Гц


0

0

Здравствуйте.

Монитор - SyncMaster 959NF

Видео - Radeon 9800XT

Ни как не могу настроить 100Гц. AspLinux v10. Последние дрова от Ати.

Утилита gft 1280 1024 100 выдает строчку:

Modeline "1280x1024_100.00" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync

Пробовал и "1280x1024_100.00" и "1280x1024@100.00". Ни фига.

Вот текст секций xorg.conf:

# Any number of monitor sections may be present

Section "Monitor"

Identifier "Monitor0"

HorizSync 31.5

VertRefresh 100

Option "DPMS"

# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz

Modeline "1280x1024@100.00" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync

# === mode lines based on GTF ===

# VGA @ 100Hz

# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync

# SVGA @ 100Hz

# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync

# XVGA @ 100Hz

# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync

# 1152x864 @ 60Hz

# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync

# 1152x864 @ 85Hz

# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync

# 1152x864 @ 100Hz

# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync

# 1280x960 @ 75Hz

# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync

# 1280x960 @ 100Hz

# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync

# SXGA @ 100Hz

# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync

# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz

# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync

# 1600x1000 @ 60Hz

# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync

# 1600x1000 @ 75Hz

# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync

# 1600x1000 @ 85Hz

# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync

# 1600x1000 @ 100Hz

# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync

# 1600x1024 @ 60Hz

# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync

# 1600x1024 @ 75Hz

# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync

# 1600x1024 @ 76Hz

# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync

# 1600x1024 @ 85Hz

# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync

# 1920x1080 @ 60Hz

# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync

# 1920x1080 @ 75Hz

# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync

# 1920x1200 @ 60Hz

# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync

# 1920x1200 @ 75Hz

# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync

# 2048x1536 @ 60

# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync

# 2048x1536 @ 60

# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync

# 1400x1050 @ 60Hz M9 Laptop mode

# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync

# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices

# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync

# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices

# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection

Re: Помогите настроить 100Гц

Дальше

********************************************************************* # Graphics device section # **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"

Identifier "Standard VGA"

VendorName "ati"

BoardName "ati"

# The chipset line is optional in most cases. It can be used to override

# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver

# modules, this line instructs the server to load the specified driver

# module. Even when not using loadable driver modules, this line

# indicates which driver should interpret the information in this section.

Driver "vga"

# The BusID line is used to specify which of possibly multiple devices

# this section is intended for. When this line isn't present, a device

# section can only match up with the primary video device. For PCI

# devices a line like the following could be used. This line should not

# normally be included unless there is more than one video device

# installed.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# === ATI device section ===

Section "Device"

Identifier "ATI Graphics Adapter"

Driver "fglrx"

# ### generic DRI settings ###

# === disable PnP Monitor ===

#Option "NoDDC"

# === disable/enable XAA/DRI ===

Option "no_accel" "no"

Option "no_dri" "no"

# === misc DRI settings ===

Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr

# ### FireGL DDX driver module specific settings ###

# === Screen Management ===

Option "DesktopSetup" "0x00000100"

Option "MonitorLayout" "AUTO, AUTO"

Option "IgnoreEDID" "off"

Option "HSync2" "unspecified"

Option "VRefresh2" "unspecified"

Option "ScreenOverlap" "0"

# === TV-out Management ===

Option "NoTV" "yes"

Option "TVStandard" "NTSC-M"

Option "TVHSizeAdj" "0"

Option "TVVSizeAdj" "0"

Option "TVHPosAdj" "0"

Option "TVVPosAdj" "0"

Option "TVHStartAdj" "0"

Option "TVColorAdj" "0"

Option "GammaCorrectionI" "0x06419064"

Option "GammaCorrectionII" "0x00000000"

# === OpenGL specific profiles/settings ===

Option "Capabilities" "0x00000000"

# === Video Overlay for the Xv extension ===

Option "VideoOverlay" "on"

# === OpenGL Overlay ===

# Note: When OpenGL Overlay is enabled, Video Overlay

# will be disabled automatically

Option "OpenGLOverlay" "off"

# === Center Mode (Laptops only) ===

Option "CenterMode" "off"

# === Pseudo Color Visuals (8-bit visuals) ===

Option "PseudoColorVisuals" "off"

# === QBS Management ===

Option "Stereo" "off"

Option "StereoSyncEnable" "1"

# === FSAA Management ===

Option "FSAAEnable" "no"

Option "FSAAScale" "1"

Option "FSAADisableGamma" "no"

Option "FSAACustomizeMSPos" "no"

Option "FSAAMSPosX0" "0.000000"

Option "FSAAMSPosY0" "0.000000"

Option "FSAAMSPosX1" "0.000000"

Option "FSAAMSPosY1" "0.000000"

Option "FSAAMSPosX2" "0.000000"

Option "FSAAMSPosY2" "0.000000"

Option "FSAAMSPosX3" "0.000000"

Option "FSAAMSPosY3" "0.000000"

Option "FSAAMSPosX4" "0.000000"

Option "FSAAMSPosY4" "0.000000"

Option "FSAAMSPosX5" "0.000000"

Option "FSAAMSPosY5" "0.000000"

# === Misc Options ===

Option "UseFastTLS" "0"

Option "BlockSignalsOnLock" "on"

Option "UseInternalAGPGART" "yes"

Option "ForceGenericCPU" "no"

BusID "PCI:1:0:0" # vendor=1002, device=4e4a

Screen 0

EndSection

**********************************************************************

# Screen sections

#

**********************************************************************

# Any number of screen sections may be present. Each describes

# the configuration of a single screen. A single specific screen section

# may be specified from the X server command line with the "-screen"

# option.

Section "Screen"

Identifier "Screen0"

Device "ATI Graphics Adapter"

Monitor "Monitor0"

DefaultDepth 24

#Option "backingstore"

Subsection "Display"

Depth 24

Modes "1280x1024"

ViewPort 0 0 # initial origin if mode is smaller than desktop

# Virtual 1280 1024

EndSubsection

EndSection

**********************************************************************

# ServerLayout sections.

#

**********************************************************************

Section "ServerLayout"

# The Identifier line must be present

Identifier "Server Layout"

Screen "Screen0"

InputDevice "Mouse1" "CorePointer"

InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

princeandrew ()

Re: Помогите настроить 100Гц

а так?

Modeline "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync

Algol ()
Ответ на: Re: Помогите настроить 100Гц от princeandrew

Re: Помогите настроить 100Гц

Следуя из конфига, тебе нужно поправить одну строчечку:

Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
#Modes "1280x1024"
Modes "1280x1024@100.00"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection

syber ()
Ответ на: Re: Помогите настроить 100Гц от princeandrew

Re: Помогите настроить 100Гц

Для начала залезь в спецификацию драйвера и прочитай, может ли он держать 100 герц. Это не шутка. У некоторых потолок в 85.

Потом убери нафиг параметры монитора - если у тебя иксы больше 4.3 или xorg, они смогут запросить верные параметры сами (есть исключение - старые мониторы типа samtron 55e могут опрашиваться неверно и это влияет на изображение).

jackill ★★★★★ ()
Ответ на: Re: Помогите настроить 100Гц от jackill

Re: Помогите настроить 100Гц

А можно уточнить, какую именно часть можноудалить? Эту Section "Monitor" Identifier "Monitor0" HorizSync 30-110 VertRefresh 50-160 Option "DPMS" # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz Modeline "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync EndSection

Эту Section "Device" Identifier "Standard VGA" VendorName "ati" BoardName "ati" # Chipset "generic" Driver "vga" # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection

Или эту

Section "Screen" Identifier "Screen0" Device "ATI Graphics Adapter" Monitor "Monitor0" DefaultDepth 24 #Option "backingstore"

Subsection "Display" Depth 24 Modes "1280x1024" ViewPort 0 0 # initial origin if mode is smaller than desktop # Virtual 1280 1024 EndSubsection EndSection

Или чё-то другое

princeandrew ()
Ответ на: Re: Помогите настроить 100Гц от princeandrew

Re: Помогите настроить 100Гц

Добавлю к совету джакилла:

Все вынести, загрузить и посмотреть

$ xrandr
что он вообще умеет,
потом
$ gtf X Y Hz

И прописать

ManJak ★★★★★ ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.