Стоит слакваря. Ядро 2.2.19. Сказевый винт. Два года пахал, а потом стало пропадать свободное место (постепенно). Перезагрузил машину (сработал fsck, появилось место) и в dmesg обнаружил следующее... Что это? Винт? Контроллер? Память?
sym53c8xx: at PCI bus 0, device 8, function 0 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c1010 detected with Symbios NVRAM sym53c8xx: at PCI bus 0, device 8, function 1 sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up) sym53c8xx: 53c1010 detected with Symbios NVRAM sym53c1010-0: rev 0x1 on pci bus 0 device 8 function 0 irq 9 sym53c1010-0: Symbios format NVRAM, ID 7, Fast-80, Parity Checking sym53c1010-0: handling phase mismatch from SCRIPTS. sym53c1010-1: rev 0x1 on pci bus 0 device 8 function 1 irq 11 sym53c1010-1: Symbios format NVRAM, ID 7, Fast-80, Parity Checking sym53c1010-1: handling phase mismatch from SCRIPTS. scsi0 : sym53c8xx-1.7.1-20000726 scsi1 : sym53c8xx-1.7.1-20000726 scsi : 2 hosts. Vendor: IBM Model: DDYS-T09170N Rev: S96H Type: Direct-Access ANSI SCSI revision: 03 Detected scsi disk sda at scsi0, channel 0, id 2, lun 0 scsi : detected 1 SCSI disk total. sym53c1010-0-<2,*>: FAST-80 WIDE SCSI 160.0 MB/s (12 ns, offset 31) SCSI device sda: hdwr sector= 512 bytes. Sectors= 17916240 [8748 MB] [8.7 GB] Partition check: sda: sda1 sda2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 76k freed Adding Swap: 262120k swap-space (priority -1) lockd_up: makesock failed, error=-5 portmap: RPC call returned error 5 possible SYN flooding on port 80. Sending cookies. sym53c1010-0:2: ERROR (81:0) (4f-6f-0) (1f/18) @ (scripth e0:f3350004). sym53c1010-0: script cmd = 98080000 sym53c1010-0: regdump: da 10 80 18 47 1f 02 0e 80 4f 82 6f 00 00 07 00 00 00 00 00 0a 00 00 00. sym53c1010-0: ctest4/sist original 0x8/0x0 mod: 0x18/0x0 sym53c1010-0: handling phase mismatch from SCRIPTS. sym53c1010-0-<2,*>: FAST-80 WIDE SCSI 160.0 MB/s (12 ns, offset 31) sym53c1010-0:2: ERROR (81:0) (4f-6f-0) (1f/18) @ (scripth e0:f3350004). sym53c1010-0: script cmd = 98080000 sym53c1010-0: regdump: da 10 80 18 47 1f 02 0e 80 4f 82 6f 00 00 07 00 00 00 00 00 0a 00 00 00. sym53c1010-0: ctest4/sist original 0x8/0x0 mod: 0x18/0x0 sym53c1010-0: handling phase mismatch from SCRIPTS. sym53c1010-0-<2,*>: FAST-80 WIDE SCSI 160.0 MB/s (12 ns, offset 31) sym53c1010-0-<2,0>: phase change 6-7 3@3bfc9cb8 resid=2. sym53c1010-0-<2,0>: M_REJECT received (0:80). scsi : aborting command due to timeout : pid 5997559, scsi0, channel 0, id 2, lun 0 Read (10) 00 00 91 9a 50 00 00 58 00 sym53c8xx_abort: pid=5997559 serial_number=5997591 serial_number_at_timeout=5997591 scsi : aborting command due to timeout : pid 5997560, scsi0, channel 0, id 2, lun 0 Write (10) 00 00 11 a9 30 00 00 08 00 sym53c8xx_abort: pid=5997560 serial_number=5997592 serial_number_at_timeout=5997592 scsi : aborting command due to timeout : pid 5997561, scsi0, channel 0, id 2, lun 0 Read (10) 00 00 91 9a a8 00 00 80 00 sym53c8xx_abort: pid=5997561 serial_number=5997593 serial_number_at_timeout=5997593 SCSI host 0 abort (pid 5997559) timed out - resetting SCSI bus is being reset for host 0 channel 0. sym53c8xx_reset: pid=5997559 reset_flags=2 serial_number=5997591 serial_number_at_timeout=5997591 sym53c1010-0: handling phase mismatch from SCRIPTS. sym53c1010-0-<2,*>: FAST-80 WIDE SCSI 160.0 MB/s (12 ns, offset 31) sym53c1010-0:2: ERROR (81:0) (8-af-80) (1f/18) @ (script 50:f31c0004). sym53c1010-0: script cmd = 90080000 sym53c1010-0: regdump: da 10 80 18 47 1f 02 0e 00 08 82 af 00 00 07 02 01 00 00 00 0a 00 00 00. sym53c1010-0: ctest4/sist original 0x8/0x0 mod: 0x18/0x0 sym53c1010-0: handling phase mismatch from SCRIPTS. sym53c1010-0-<2,*>: FAST-80 WIDE SCSI 160.0 MB/s (12 ns, offset 31)