sudo smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-17-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model:     ADATA SP920SS
Serial Number:    8F5320006479
LU WWN Device Id: 5 707c18 700074958
Firmware Version: 1.09
User Capacity:    256 060 513 792 bytes [256 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
TRIM Command:     Available, deterministic, zeroed
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Sep  4 02:27:20 2022 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x15) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Abort Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   000    Pre-fail  Always       -       944
  5 Reallocated_Sector_Ct   0x0033   100   100   003    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       43113
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       530
174 Unknown_Attribute       0x0030   100   100   000    Old_age   Offline      -       113
177 Wear_Leveling_Count     0x0000   100   100   000    Old_age   Offline      -       3
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0022   039   057   000    Old_age   Always       -       39 (Min/Max 0/57)
195 Hardware_ECC_Recovered  0x001c   100   100   000    Old_age   Offline      -       13
231 Unknown_SSD_Attribute   0x0013   098   098   010    Pre-fail  Always       -       0
233 Media_Wearout_Indicator 0x0000   000   000   000    Old_age   Offline      -       25114907
234 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       -       8399974
241 Total_LBAs_Written      0x0032   000   000   000    Old_age   Always       -       22910350
242 Total_LBAs_Read         0x0032   000   000   000    Old_age   Always       -       8256534
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported






