LINUX.ORG.RU

Научите читать S.M.A.R.T

 ,


0

1

Где хорошо разжёвано?

smartctl -a /dev/sda
smartctl 5.42 2011-10-20 r3458 [i686-linux-3.5.0-35-desktop] (SUSE RPM)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     Hitachi HTS547575A9E384
Serial Number:    J2191059DUML1C
LU WWN Device Id: 5 000cca 6dfd9be4a
Firmware Version: JE4OA60A
User Capacity:    750,156,374,016 bytes [750 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Fri Aug 10 21:34:42 2012 FET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (   45) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.                                                                                                             
                                        Self-test supported.                                                                                                                        
                                        No Conveyance Self-test supported.                                                                                                          
                                        Selective Self-test supported.                                                                                                              
SMART capabilities:            (0x0003) Saves SMART data before entering                                                                                                            
                                        power-saving mode.                                                                                                                          
                                        Supports SMART auto save timer.                                                                                                             
Error logging capability:        (0x01) Error logging supported.                                                                                                                    
                                        General Purpose Logging supported.                                                                                                          
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 201) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   185   185   033    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       40
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       253
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       40
191 G-Sense_Error_Rate      0x000a   098   098   000    Old_age   Always       -       65539
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       3
193 Load_Cycle_Count        0x0012   098   098   000    Old_age   Always       -       20106
194 Temperature_Celsius     0x0002   162   162   000    Old_age   Always       -       37 (Min/Max 25/49)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

★★★★

Power_On_Hours Old_age 253

Видишь, Old написано, значит винт тебе продали старый, отдай его мне, пока твои драгоценные данные не потерялись

anonymous ()

Пока VALUE больше THRESH, всё в порядке.

AITap ★★★★★ ()

А по-моему все в порядке, когда по нулям следующие значения:
Current_Pending_Sector
Offline_Uncorrectable
Reallocated_Sector_Ct
и нету стрёма в логе типа «READ DMA TIMEOUT».

Komintern ★★★★★ ()

Диск новый и в хорошем сосотоянии.

Deleted ()

Не особо доверяю этой бурде, после заморочек с древним sata-контроллером видящим диск как ide в биосе. SMART писал тонну битых секторов, да и система подвисала, после проверки на нормальном контроллере-sata диск нормальный оказался.

KUZMA ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.