Иногда система стала немного подвисать по I/O, при этом в dmesg типа такого
[392547.412610] ata1.00: exception Emask 0x10 SAct 0x3c000000 SErr 0x4090000 action 0xe frozen
[392547.412612] ata1.00: irq_stat 0x00400040, connection status changed
[392547.412614] ata1: SError: { PHYRdyChg 10B8B DevExch }
[392547.412616] ata1.00: failed command: READ FPDMA QUEUED
[392547.412621] ata1.00: cmd 60/00:d0:e8:94:49/01:00:0b:00:00/40 tag 26 ncq dma 131072 in
res 40/00:ec:00:48:4f/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[392547.412623] ata1.00: status: { DRDY }
[392547.412624] ata1.00: failed command: WRITE FPDMA QUEUED
[392547.412629] ata1.00: cmd 61/00:d8:00:38:4f/0a:00:01:00:00/40 tag 27 ncq dma 1310720 ou
res 40/00:ec:00:48:4f/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[392547.412630] ata1.00: status: { DRDY }
[392547.412631] ata1.00: failed command: WRITE FPDMA QUEUED
[392547.412635] ata1.00: cmd 61/00:e0:00:42:4f/06:00:01:00:00/40 tag 28 ncq dma 786432 out
res 40/00:ec:00:48:4f/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[392547.412636] ata1.00: status: { DRDY }
[392547.412637] ata1.00: failed command: WRITE FPDMA QUEUED
[392547.412642] ata1.00: cmd 61/00:e8:00:48:4f/0a:00:01:00:00/40 tag 29 ncq dma 1310720 ou
res 40/00:ec:00:48:4f/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
[392547.412643] ata1.00: status: { DRDY }
[392547.412645] ata1: hard resetting link
[392548.128649] ata1: SATA link down (SStatus 0 SControl 300)
[392551.418114] ata1: hard resetting link
[392556.768801] ata1: link is slow to respond, please be patient (ready=0)
[392561.448857] ata1: COMRESET failed (errno=-16)
[392561.448861] ata1: hard resetting link
[392564.617921] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[392564.618883] ata1.00: configured for UDMA/100
[392564.618912] ata1: EH completeДиск Crutial M4 на 256GB, SMART такой
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 001 Old_age Always - 43370
12 Power_Cycle_Count 0x0032 100 100 001 Old_age Always - 498
170 Grown_Failing_Block_Ct 0x0033 100 100 010 Pre-fail Always - 0
171 Program_Fail_Count 0x0032 100 100 001 Old_age Always - 5722
172 Erase_Fail_Count 0x0032 100 100 001 Old_age Always - 0
173 Wear_Leveling_Count 0x0033 091 091 010 Pre-fail Always - 274
174 Unexpect_Power_Loss_Ct 0x0032 100 100 001 Old_age Always - 212
181 Non4k_Aligned_Access 0x0022 100 100 001 Old_age Always - 131 47 83
183 SATA_Iface_Downshift 0x0032 100 100 001 Old_age Always - 2
184 End-to-End_Error 0x0033 100 100 050 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 001 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 001 Old_age Always - 0
189 Factory_Bad_Block_Ct 0x000e 100 100 001 Old_age Always - 121
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 0
195 Hardware_ECC_Recovered 0x003a 100 100 001 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 001 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 001 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 001 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 001 Old_age Always - 7
202 Perc_Rated_Life_Used 0x0018 091 091 001 Old_age Offline - 9
206 Write_Error_Rate 0x000e 100 100 001 Old_age Always - 5722
SMART Error Log Version: 1
Warning: ATA error count 0 inconsistent with error log pointer 4Якобы, износ только 9%, настораживает только Program_Fail_Count и Write_Error_Rate.
Алсо, посоветуйте, что сейчас похожее покупать на замену, более-менее надёжное?
