LINUX.ORG.RU

Сообщения hitode

 

Удалённое управление. Заковырка и незнание.

Форум — General

Нужно залезть в комп и скачать пару файлов. Нахожусь далеко. За компом чайники. Всё что могу выудить это IP (динамический). Логинится там либо с правами guest либо user, не помню, но вроде второе.. если это вообще важно.
Попробовал ssh - не вышло. Роутер, без каких-то пробросов. Возможно что и в конфиге ssh каверзы. Надежды на него нет.
Никаких vnc не установленно.
Кое-как объяснил как скачать/распаковать/запустить TeamViewer. Запускается, но не появляется GUI - отсутствует либа. Установка невозможна. Cкинуть свою либу а далее LD_PRELOAD не канает.
AnyDesk, вроде называется, - даже не запускается, то же либы нет.
Загуглил AppImage какого-нибудь vnc - не нашёл. Слепить бы самому статику - не умею. Есть варианты?

Проблему отложил, но годных решений жажду. Чем проще, тем лучше + запуск от юзера без установки чего-либо. Всем спасибо!

 , ,

hitode
()

Внешний ЖД. Починиться или

Форум — Linux-hardware

Подключил внешний диск он щёлкает и сыплет ошибки.

[    6.826134] sd 7:0:0:0: [sdc] No Caching mode page found
[    6.826169] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[    7.274048] scsi 7:0:0:0: rejecting I/O to offline device
[    7.274120] print_req_error: I/O error, dev sdc, sector 0
[    7.274181] Buffer I/O error on dev sdc, logical block 0, async page read
И так до бесконечности. Иногда он подключается и можно залезть посмотреть что на нём, но вскоре отключается и щёлкает.
Что с ним? Можно ли его починить и как?
sudo smartctl /dev/sdc --all
smartctl 6.6 2016-05-31 r4324 [i686-linux-4.13.0-1-686-pae] (local build)

/dev/sdc: Unknown USB bridge [0x18a5:0x0236 (0x000)]
Please specify device type with the -d option.
smart говорит выбрать тип -d а какой выбрать - хз

 ,

hitode
()

Не стартуют иксы. Логи из будущего

Форум — General

Debian GNU/Linux stable-updates (sid)

Linux hitode 4.7.0-1-686-pae #1 SMP Debian 4.7.5-1 (2016-09-26) i686 GNU/Linux
Включил комп, вижу gdm3 (хотя автозаход настроен). Вручную не заходит, только экран моргнёт пару раз да снова gdm.
journalctl -b _UID=1000
http://pastebin.com/dh11Ngff
В логах какая-то фигня с временем (на час вперёд hwclock)
исправил
hwclock --hctosys
Что дальше делать даже не знаю.

 , ,

hitode
()

Зависает комп. В игре.

Форум — Linux-hardware

На клавиатуру не реагирует, ни иксы не вырубить ни в консоль сходить.

Debian Wheezy 3.2.0-4-686-pae #1 SMP Debian 3.2.65-1 i686 GNU/Linux

ATI Radeon 2600HD

cat /var/log/messages:

Jan 13 00:04:43 hitode kernel: [ 3493.748044] GPU lockup (waiting for 0x00044E62 last fence id 0x00044E60)
Jan 13 00:04:43 hitode kernel: [ 3493.787297] radeon 0000:05:00.0: GPU softreset 
Jan 13 00:04:43 hitode kernel: [ 3493.787304] radeon 0000:05:00.0:   R_008010_GRBM_STATUS=0xA0001030
Jan 13 00:04:43 hitode kernel: [ 3493.787309] radeon 0000:05:00.0:   R_008014_GRBM_STATUS2=0x00000003
Jan 13 00:04:43 hitode kernel: [ 3493.787313] radeon 0000:05:00.0:   R_000E50_SRBM_STATUS=0x200000C0
Jan 13 00:04:43 hitode kernel: [ 3493.787319] radeon 0000:05:00.0:   R_008020_GRBM_SOFT_RESET=0x00007FEE
Jan 13 00:04:43 hitode kernel: [ 3493.802207] radeon 0000:05:00.0: R_008020_GRBM_SOFT_RESET=0x00000001
Jan 13 00:04:43 hitode kernel: [ 3493.818087] radeon 0000:05:00.0:   R_008010_GRBM_STATUS=0xA0003030
Jan 13 00:04:43 hitode kernel: [ 3493.818091] radeon 0000:05:00.0:   R_008014_GRBM_STATUS2=0x00000003
Jan 13 00:04:43 hitode kernel: [ 3493.818095] radeon 0000:05:00.0:   R_000E50_SRBM_STATUS=0x200080C0
Jan 13 00:04:43 hitode kernel: [ 3493.819090] radeon 0000:05:00.0: GPU reset succeed
Jan 13 00:04:43 hitode kernel: [ 3493.829144] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
Jan 13 00:04:43 hitode kernel: [ 3493.837265] radeon 0000:05:00.0: WB enabled
Jan 13 00:04:43 hitode kernel: [ 3493.837274] [drm] fence driver on ring 0 use gpu addr 0x20000c00 and cpu addr 0xffb5dc00
Jan 13 00:04:43 hitode kernel: [ 3493.874120] [drm] ring test on 0 succeeded in 1 usecs
Jan 13 00:04:43 hitode kernel: [ 3493.874175] [drm] ib test on ring 0 succeeded in 1 usecs
Jan 13 00:04:55 hitode shutdown[4338]: shutting down for system halt
Jan 13 00:04:58 hitode kernel: [ 3508.886067] SysRq : SAK
Jan 13 00:04:58 hitode kernel: [ 3508.886103] SAK: killed process 2974 (Xorg): task_session(p)==tty->session
Jan 13 00:04:58 hitode kernel: [ 3508.886164] SAK: killed process 2974 (Xorg): task_session(p)==tty->session
Jan 13 00:04:58 hitode kernel: [ 3508.886175] SAK: killed process 3079 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886257] SAK: killed process 3080 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886261] SAK: killed process 3081 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886264] SAK: killed process 3082 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886268] SAK: killed process 3083 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886271] SAK: killed process 3084 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886275] SAK: killed process 3085 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886278] SAK: killed process 3086 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886282] SAK: killed process 3087 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886285] SAK: killed process 3088 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886289] SAK: killed process 3089 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886292] SAK: killed process 3090 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886296] SAK: killed process 3091 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886299] SAK: killed process 3092 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886303] SAK: killed process 3093 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886306] SAK: killed process 3094 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886310] SAK: killed process 3095 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886314] SAK: killed process 3096 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886317] SAK: killed process 3097 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886321] SAK: killed process 3098 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886324] SAK: killed process 3099 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886328] SAK: killed process 3100 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886331] SAK: killed process 3101 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886335] SAK: killed process 3102 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886338] SAK: killed process 3103 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886342] SAK: killed process 3104 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886345] SAK: killed process 3105 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886349] SAK: killed process 3106 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886352] SAK: killed process 3107 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886356] SAK: killed process 3108 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886359] SAK: killed process 3109 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886363] SAK: killed process 3110 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886366] SAK: killed process 3111 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886370] SAK: killed process 3112 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886373] SAK: killed process 3113 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886377] SAK: killed process 3114 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886380] SAK: killed process 3115 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886384] SAK: killed process 3116 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886387] SAK: killed process 3117 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886391] SAK: killed process 3118 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886394] SAK: killed process 3119 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886398] SAK: killed process 3120 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886401] SAK: killed process 3121 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886405] SAK: killed process 3122 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886408] SAK: killed process 3123 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886412] SAK: killed process 3124 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886415] SAK: killed process 3125 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886419] SAK: killed process 3126 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886423] SAK: killed process 3127 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886426] SAK: killed process 3128 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886430] SAK: killed process 3129 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886434] SAK: killed process 3130 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886437] SAK: killed process 3131 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886441] SAK: killed process 3132 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886444] SAK: killed process 3133 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886448] SAK: killed process 3134 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886451] SAK: killed process 3135 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886455] SAK: killed process 3136 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886458] SAK: killed process 3137 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886462] SAK: killed process 3138 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886465] SAK: killed process 3139 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886469] SAK: killed process 3140 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886472] SAK: killed process 3141 (console-kit-dae): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886476] SAK: killed process 3143 (gmain): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886479] SAK: killed process 3144 (gdbus): fd#10 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886584] SAK: killed process 4341 (rc): fd#0 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886591] SAK: killed process 4350 (startpar): fd#0 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886596] SAK: killed process 4439 (lightdm): fd#0 opened to the tty
Jan 13 00:04:58 hitode kernel: [ 3508.886601] SAK: killed process 4454 (start-stop-daem): fd#0 opened to the tty
Jan 13 00:04:59 hitode shutdown[4623]: shutting down for system halt
Jan 13 00:05:03 hitode shutdown[4646]: shutting down for system halt

cat /etc/X11/xorg.conf:
Section "Device"
	Identifier	"Configured Video Device"
	Driver		"radeon"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
	# 1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz
	Modeline "1440x900_60.00"  106.47  1440 1520 1672 1904  900 901 904 932  -HSync +Vsync
	Option	"dpms"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	DefaultDepth     24
	SubSection	"Display"
		Modes    "1440x900_60.00"
	EndSubSection
	SubSection "Display"
		Depth  24
		Modes  "1400x900_60.00"
	EndSubSection 
EndSection

dpkg --list|grep -i radeon:
ii  libdrm-radeon1:i386               2.4.40-1~deb7u2  i386   Userspace interface to radeon-specific kernel DRM services -- runtime
ii  radeontool                        1.6.2-1.1        i386   utility to control ATI Radeon backlight functions on laptops
ii  xserver-xorg-video-radeon         1:6.14.4-8       i386   X.Org X server -- AMD/ATI Radeon display driver

 

hitode
()

Nexuiz servers

Форум — Games

Решил поиграть в Nexuiz а там только один серв находится. Только у меня так или оно сдохло от ненадобности?

 

hitode
()

Firefox. Сделать как в Maxthon.

Форум — General

Есть в браузере Maxthon кучка плюшек «искаропки», такие как сниффер ресурсов, ночной режим, мышиные жесты..
Мне нужна не полная функция сниффера -> «В отдельном окне» (открепить).
Пытался загуглить, но не смог сформулировать эту функциональность. Подробности в видео (2я минута)
Может кто уже сделал такую функцию себе или знает аддон/скрипт? Прошу просветить.

 , , , ,

hitode
()

fotki.yandex.ru и webdav etc.

Форум — General

Нужно из локалхоста кидать на фотки на сабж.

Засим вопросы:

  • Как загружать фотки минуя браузер?
  • Вообще кто-нибудь пользует fotki.yandex?
  • Аналоги под мои нужды? Кто в теме?
    P.S. Я гуглил но не выгуглил.
hitode
()

Xorg. Radeon 2600HD. Разрешение экрана.

Форум — Desktop

Доброго времени! Имеется Видеокарта ATI Radeon 2600HD и монитор Acer v193w. Не получается поставить разрешение 1400x900. Монитор и видеокарта умеет это разрешение, но руки мои или хз что... Такой xorg не принял - «Вывод не поддерживается» сказал.

Section "Monitor"
Identifier   "Monitor0"
HorizSync    31.5 - 79.0
VertRefresh  50-90
Modeline "1440x900_60.00" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
Option       "dpms"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
     Viewport 0 0
     Depth 32
     Modes "1400x900" "1024x768" "800x600"
EndSubSection
EndSection
Сейчас такой xorg.conf сделаный:
aticonfig --initial

xrand

root@debian:/home# xrandr
Screen 0: minimum 320 x 200, current 1152 x 864, maximum 1360 x 1360
DVI-1 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1360x768       59.8  
   1152x864       60.0* 
   1024x768       60.0  
   800x600        60.3  
   640x480        59.9  
   680x384       119.6    119.9  
   576x432       120.1  
   512x384       120.0  
   400x300       120.6  
   320x240       120.1  
DVI-0 disconnected (normal left inverted right x axis y axis)
И что ещё показать?
root@debian:/home# dmesg | grep radeon
[   18.069790] [drm] radeon kernel modesetting enabled.
root@debian:/home# dpkg --list | grep radeon
ii  libdrm-radeon1:i386                  2.4.40-1~deb7u2                    i386         Userspace interface to radeon-specific kernel DRM services -- runtime
ii  xserver-xorg-video-radeon            1:6.14.4-8                         i386         X.Org X server -- AMD/ATI Radeon display driver
root@debian:/home# fglrxinfo 
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  153 (GLX)
  Minor opcode of failed request:  19 (X_GLXQueryServerString)
  Serial number of failed request:  12
  Current serial number in output stream:  12

 , , ,

hitode
()

RSS подписка на новые темы