После апдейта ищез файл /etc/inittab.
Чтобы система зарузилась - взял с бекапа (lenny 5.0.1). Грузится, работает - но есть странность =) в консоли не запрашивает пароль, а сразу дает рута (во всех консолях /dev/tty1-6).
Подскажите как переконфигурировать /etc/inittab или если есть возможность, дебианщики, запостите свой.
Вот что у меня сейчас:
# /etc/inittab: init(8) configuration.
# $Id: inittab,v 1.9 2001/05/31 10:37:50 Exp $
# The default runlevel.
id:5:initdefault:
# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS
# What to do in single-user mode.
~~:S:respawn:/bin/bash -login >/dev/tty1 2>&1 </dev/tty1
# /etc/init.d executes the S and K scripts upon change
# of runlevel.
#
# Runlevel 0 is halt.
# Runlevel 1 is single-user.
# Runlevels 2-5 are multi-user.
# Runlevel 6 is reboot.
l0:0:wait:/etc/init.d/rc 0
l1:1:wait:/etc/init.d/rc 1
l2:2:wait:/etc/init.d/rc 2
l3:3:wait:/etc/init.d/rc 3
l4:4:wait:/etc/init.d/rc 4
l5:5:wait:/etc/init.d/rc 5
l6:6:wait:/etc/init.d/rc 6
# What to do when CTRL-ALT-DEL is pressed.
ca::ctrlaltdel:/etc/init 0
# Action on special keypress (ALT-UpArrow).
kb::kbrequest:/bin/echo "Keyboard Request -- edit /etc/inittab to let this work."
# What to do when the power fails/returns.
pf::powerwait:/etc/init.d/powerfail start
pn::powerfailnow:/etc/init.d/powerfail now
po::powerokwait:/etc/init.d/powerfail stop
# /sbin/getty invocations for the runlevels.
#
# The "id" field MUST be the same as the last
# characters of the device (after "tty").
#
# Format:
# <id>:<runlevels>:<action>:<process>
# 6 virtual consoles with immortal shells
1:12345:respawn:/bin/bash -login >/dev/tty1 2>&1 </dev/tty1
2:2345:respawn:/bin/bash -login >/dev/tty2 2>&1 </dev/tty2
3:2345:respawn:/bin/bash -login >/dev/tty3 2>&1 </dev/tty3
4:2345:respawn:/bin/bash -login >/dev/tty4 2>&1 </dev/tty4
5:2345:respawn:/bin/bash -login >/dev/tty5 2>&1 </dev/tty5
6:2345:respawn:/bin/bash -login >/dev/tty6 2>&1 </dev/tty6
# Example how to put a getty on a serial line (for a terminal)
#
#T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
# Example how to put a getty on a modem line.
#
#T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
#-- isdnutils begin
# Change the lines below for your local setup and uncomment them.
# Use "init q" to reread inittab.
# look at the vboxgetty / mgetty manpage for more information (mgetty isn't
# standard!)
#
#I0:2345:respawn:/usr/sbin/vboxgetty -d /dev/ttyI0
#I1:2345:respawn:/sbin/mgetty -D -m '"" ATZ OK AT&Eyourmsnhere OK AT&B512 OK' -s 38400 ttyI1
#-- isdnutils end
