LINUX.ORG.RU

Gentoo, Orange pi4, проблемы с загрузкой инита

 , ,


1

2
(12:06) (.)(.): OpenRC 0.41.2 is starting up Gentoo Linux (aarch64)

[    1.837720] vendor storage:20190527 ret = 0
 * Mounting /proc ...
[    1.848569] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 240
[    1.851725] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    1.852272] mmc2: new ultra high speed SDR104 SDIO card at address 0001
 [ ok ]
 * Mounting /run ...
 * /run/openrc: creating directory
 * /run/lock: creating directory
 * /run/lock: correcting owner
 * Caching service dependencies ...
[    2.360632] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[    2.910044] scsi 0:0:0:0: Direct-Access     UFD 3.0  Silicon-Power16G PMAP PQ: 0 ANSI: 6
[    2.916328] sd 0:0:0:0: [sda] 30998528 512-byte logical blocks: (15.9 GB/14.8 GiB)
[    2.920779] sd 0:0:0:0: [sda] Write Protect is off
[    2.925148] sd 0:0:0:0: [sda] No Caching mode page found
[    2.925662] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    2.944576]  sda: sda1 sda2 sda3
[    2.955299] sd 0:0:0:0: [sda] Attached SCSI removable disk
Service `netmount' needs non existent service `net'
 [ ok ]
 * Clock skew detected with `(null)'
 * Adjusting mtime of `/run/openrc/deptree' to Sat Feb  1 09:03:33 2020
 * WARNING: clock skew detected!
 * Mounting /sys ...
 * Remounting devtmpfs on /dev ...
 [ ok ]
 [ ok ]
 * Mounting security filesystem ...
 * Mounting /dev/mqueue ...
 [ ok ]
 [ ok ]
 * Mounting debug filesystem ...
 [ ok ]
 * Mounting /dev/pts ...
 * Mounting config filesystem ...
 [ ok ]
 [ ok ]
 * Mounting fuse control filesystem ...
 [ ok ]
 * Mounting /dev/shm ...
 [ ok ]
 * Mounting persistent storage (pstore) filesystem ...
 [ ok ]
cgroups           | * Mounting cgroup filesystem ...
cgroups           | [ ok ]
kmod-static-nodes | * Creating list of required static device nodes for the current kernel ...
udev              | * Starting udev ...
kmod-static-nodes | [ ok ]
udev              | [ ok ]
opentmpfiles-dev  | * Setting up tmpfiles.d entries for /dev ...
opentmpfiles-dev  | [ ok ]
udev-trigger      | * Generating a rule to create a /dev/root symlink ...
udev-trigger      | [ ok ]
udev-trigger      | * Populating /dev with existing devices through uevents ...
udev-trigger      | [ ok ]
 * WARNING: clock skew detected!
termencoding      | * Setting terminal encoding [UTF-8] ...
termencoding      | [ ok ]
keymaps           | * Setting keyboard mode [UTF-8] ...
hwclock           | * Setting system clock using the hardware clock [UTC] ...
keymaps           | [ ok ]
keymaps           | * Loading key mappings [us] ...
keymaps           | [ ok ]
hwclock           | [ ok ]
loopback          | * Bringing up network interface lo ...
hostname          | * Setting hostname to localhost  ...
sysctl            | * Configuring kernel parameters ...
hostname          | [ ok ]
fsck              | * Checking local filesystems  ...
sysctl            | [ ok ]
loopback          | [ ok ]
fsck              | [ ok ]
binfmt            | * Loading custom binary format handlers ...
binfmt            | [ ok ]
root              | * Remounting filesystems ...
root              | [ ok ]
mtab              | * Updating /etc/mtab ...
swap              | * Activating swap devices ...
mtab              | * Creating mtab symbolic link
swap              | [ ok ]
mtab              | [ ok ]
localmount        | * Mounting local filesystems ...
localmount        | [ ok ]
opentmpfiles-setup| * Setting up tmpfiles.d entries ...
opentmpfiles-setup| [ ok ]
bootmisc          | * Creating user login records ...
bootmisc          | [ ok ]
bootmisc          | * Wiping /tmp directory ...
bootmisc          | [ ok ]
save-keymaps      | * Saving key mapping ...
save-termencoding | * Saving terminal encoding ...
save-termencoding | [ ok ]
save-keymaps      | [ ok ]
INIT: Entering runlevel: 3
 * WARNING: clock skew detected!
netmount          | * ERROR: netmount needs service(s) net
local             | * Starting local ...
local             | [ ok ]
INIT: Id "f0" respawning too fast: disabled for 5 minutes
INIT: Id "f0" respawning too fast: disabled for 5 minutes
INIT: Id "f0" respawning too fast: disabled for 5 minutes
INIT: Id "f0" respawning too fast: disabled for 5 minutes
INIT: Id "f0" respawning too fast: disabled for 5 minutes
INIT: Id "f0" respawning too fast: disabled for 5 minutes
INIT: Id "f0" respawning too fast: disabled for 5 minutes

И висит так бесконечно...

Понимаю, что проблема тут в ините и можно сконфигурять так, чтоб работало, но у меня нет мыслей... Кто может помочь?

★★★★

Ответ на: комментарий от burato

а проблема в этом была разве?

Из того что вижу сходу сетевуха либо не активирована в rc-config либо не видится ядром.

Консоль точно 9600? у меня так же малинка висела пока на 115200 не поменял.

Slackware_user ★★★★★ ()