LINUX.ORG.RU

Re: Подключение USB

"не судьба" ;) а если серьезно - lsusb что показывает ? в ядро поддержку usb mass storage и scsi disk включил ? флешку смонтировал ?

sasha999 ★★★★ ()
Ответ на: Re: Подключение USB от Shaman007

Re: Подключение USB

Linux version 2.4.20-8 (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffc000 (usable) BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131068 zone(0): 4096 pages. zone(1): 126972 pages. zone(2): 0 pages. Kernel command line: ro root=LABEL=/ Initializing CPU#0 Detected 701.597 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1399.19 BogoMIPS Memory: 511460k/524272k available (1347k kernel code, 10248k reserved, 999k data, 132k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf08c0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:04.0 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:04.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio hda: QUANTUM FIREBALLlct15 15, ATA DISK drive hdb: IBM-DTLA-305020, ATA DISK drive blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff) blk: queue c03ca084, I/O limit 4095Mb (mask 0xffffffff) hdc: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CD/DVD-ROM drive hdc: Disabling (U)DMA for ATAPI CD-ROM DRIVE 40X MAXIMUM ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 29336832 sectors (15020 MB) w/418KiB Cache, CHS=1826/255/63, UDMA(33) hdb: host protected area => 1 hdb: 40188960 sectors (20577 MB) w/380KiB Cache, CHS=2501/255/63, UDMA(33) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 < hda5 hda6 > hdb: hdb1 hdb2 hdb4 < hdb5 hdb6 > ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 83k freed VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 132k freed Adding Swap: 522104k swap-space (priority -1)

FAQ читал, устройсво видно когда ручками modprobe выполняешь

dream ()
Ответ на: Re: Подключение USB от sasha999

Re: Подключение USB

lsusb вот что выдал:

Unknown line at line 58 Unknown line at line 110 .......

dream ()

Re: Подключение USB

А вот такой дурацкий вопрос --- hotplug случайно не отключен? без него так и придется каждый раз modprobe говорить, когда новое устройство на ходу вставляется.

dn2010 ★★★★★ ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.