Есть ноут с intel hm65 некий Lenovo z570, вот задумался выкинуть сидюк (возьму юсбшку на всякий случай), а в месно него влепить еще один ссд. В даташите ноута сказато, что там SATA2 (под винчестер), но вот только dmesg и даташит intel с ними не согласны — говорят SATA3. Вот я и думаю стоит рисковать и переплачивать за шахту HDC-27 или таки взять HDC-25. Или они его могли урезать... Чем бы его посмотреть?
dmesg | grep SATA
[ 0.792666] ata1: SATA max UDMA/133 cmd 0x40b8 ctl 0x40cc bmdma 0x4090 irq 19
[ 0.792671] ata2: SATA max UDMA/133 cmd 0x40b0 ctl 0x40c8 bmdma 0x4098 irq 19
[ 0.793501] ata3: SATA max UDMA/133 cmd 0x40a8 ctl 0x40c4 bmdma 0x4070 irq 19
[ 0.793505] ata4: SATA max UDMA/133 cmd 0x40a0 ctl 0x40c0 bmdma 0x4078 irq 19
[ 1.123569] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.276356] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.152834] ata2.00: SATA link down (SStatus 4 SControl 0)
[ 2.152849] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2.297599] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.297612] ata1.01: SATA link down (SStatus 4 SControl 0)
[ 2687.358519] ata4: SATA link down (SStatus 0 SControl 300)
[ 2687.511585] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2688.388035] ata2.00: SATA link down (SStatus 4 SControl 0)
[ 2688.388049] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2688.532763] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2688.532776] ata1.01: SATA link down (SStatus 4 SControl 0)
lspci -vvv
00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Lenovo Device 3975
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 40b8 [size=8]
Region 1: I/O ports at 40cc [size=4]
Region 2: I/O ports at 40b0 [size=8]
Region 3: I/O ports at 40c8 [size=4]
Region 4: I/O ports at 4090 [size=16]
Region 5: I/O ports at 4080 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: Lenovo Device 3975
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 40a8 [size=8]
Region 1: I/O ports at 40c4 [size=4]
Region 2: I/O ports at 40a0 [size=8]
Region 3: I/O ports at 40c0 [size=4]
Region 4: I/O ports at 4070 [size=16]
Region 5: I/O ports at 4060 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
