как настроить тв тюнер

0

0

помогите настроить тв тюнер,
RoverMedia TV Link Pro FM P34RF, TV-tuner, FM, Stereo, int
Процессор Philips 7134

$ dmesg | grep saa7134

saa7134[0]: found at 0000:00:08.0, rev: 1, irq: 11, latency: 32, mmio: 0xea000000
saa7134[0]: subsystem: 19d1:0138, board: UNKNOWN/GENERIC [card=0,autodetected]
saa7134[0]: board init: gpio is 3b000
saa7134[0]: i2c eeprom 00: d1 19 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [default]

$ lsmod | grep saa
saa7134 110420 0
video_buf 21956 1 saa7134
v4l2_common 5760 1 saa7134
v4l1_compat 14788 1 saa7134
i2c_core 21904 1 saa7134
ir_common 7556 1 saa7134
videodev 9600 1 saa7134
soundcore 9760 2 saa7134,snd

$ mplayer tv:// -tv driver=v4l2:norm=5:device=/dev/video0
...Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <olschewski@zpr.uni-koeln.de>
comment: first try, more to come ;-)
Selected device: UNKNOWN/GENERIC

$ v4l-info
...
tuner
VIDIOCGTUNER
tuner : 0
name : ""
rangelow : 0
rangehigh : 0
flags : 0x7 [PAL,NTSC,SECAM]
mode : PAL
signal : 0

$ tvtime-scanner
..Scanning using TV standard SECAM.
No tuner found on input 0.

:(
при включении mplayer или tvtime показывается только черный экран и всё,
что делать?