LINUX.ORG.RU

Периодические зависания при загрузке МВ77.07

 ,


1

2

Происходят периодические зависания после reboot
после строки
[ 6.760000] ledtrig-cpu: registered to indicate activity on CPUs
Ничего в гугле по этому поводу не нашел, кроме этого
https://github.com/RC-MODULE/linux-3.10.x/issues/7
От чего это может быть ?
Может кто решил эту проблему ?
Ниже все сообщения после ребута до момента зависания.

root@shadow:~# reboot                                                           
                                                                                
Broadcast message from root@shadow (ttyS0) (Tue Oct 27 10:43:41 2015):          
                                                                                
The system is going down for reboot NOW!                                        
INIT: Sending processes the TERM signal                                         
[info] Using makefile-style concurrent boot in runlevel 6.                      
[info] Saving the system clock.                                                 
hwclock: Cannot access the Hardware Clock via any known method.                 
hwclock: Use the --debug option to see the details of our search for an access m
ethod.                                                                          
[....] Asking all remaining processes to terminate...done.                      
[....] All processes ended within 1 seconds...done.                             
[....] Deconfiguring network interfaces...done.                                 
[....] Deactivating swap...done.                                                
[  576.150000] UBIFS: background thread "ubifs_bgt0_0" stops                    
[info] Will now restart.                                                        
[  578.430000] Restarting system.                                               
[  578.440000] platform: Requested system restart                               
                                                                                
                                                                                
                                                                                
MBOOT (K1879 and friends): Version mboot-00063-g9302e24-dirty (Built Thu Aug 21 
17:10:13 MSK 2014)                                                              
OTP info: boot_source 2 jtag_stop 0 words_len 1024                              
Maximum bank size: 0x10000000 bytes                                             
Detected 134217728 bytes of EM0 memory                                          
MEMORY: 40000000 -> 48000000                                                    
Memory layout                                                                   
        0x00100010  early                                                       
        0x001001C8  text                                                        
        0x0011E9BC  data                                                        
        0x00127D40  signature                                                   
        0x00127D44  bss_start                                                   
        0x00135EB4  stack_start                                                 
        0x00137FF8^ stack_ptr                                                   
        0x00138000  malloc                                                      
        0x0017F000  env                                                         
mnand_read_id: flash id 0xD3                                                    
mnand_read_id: flash ext_id 0x95                                                
mnand_read_id: CS0 NAND 1GiB 3,3V 8-bit size(1024) writesize(2048) oobsize(64) e
rasesize(131072)                                                                
mnand_read_id: flash id 0x00                                                    
mnand_read_id: WARNING: Unknown flash ID. Using default (0xF1)                  
mnand_read_id: flash ext_id 0x00                                                
mnand: Chip configurations differ, ignoring CS1                                 
greth: Setting GRETH base addr to 0x20034000                                    
greth: Found GRETH at 0x20034000, irq 255                                       
greth: Resetting GRETH                                                          
greth: greth: 'phyaddr' not set, fall back to built-in table                    
greth: greth: using preset PHY addr: 1f                                         
greth: Resetting the PHY                                                        
greth: write_mii: 0x20034010 < 0xB100F801 [p:31 a:0 d:0xB100]                   
greth: 10/100 GRETH Ethermac at [0x20034000] irq 255. Running 100 Mbps full dupl
ex                                                                              
greth: PHY: Vendor 1f0   Device c    Revision 4                                 
greth: greth_init                                                               
greth: greth_init: enabling receiver                                            
ETH new device: name GRETH_10/100                                               
greth: GRETH: New MAC address: 02:00:f7:00:27:0f                                
USB thresholds: in 0x20 out 0x7e                                                
Is there an EDCL emergency? Nope                                                
edcl: Ethernet debug disabled by environment                                    
MTD Partition:       boot @ 0x00000000 size 0x00040000                          
MTD Partition:        env @ 0x00040000 size 0x00020000                          
MTD Partition:        dtb @ 0x00060000 size 0x00020000                          
MTD Partition:     kernel @ 0x00080000 size 0x00400000                          
MTD Partition:     rootfs @ 0x00480000 size 0x3FB80000                          
Hit any key (in 2 sec) to skip autoload...                                      
Running autoload command 'mtdboot;bootm'                                        
MTD Loading kernel image: dev kernel offset 0x000000000000 addr 0x40100000      
Linux preparing to boot the kernel: machid 0xcd1                                
Using Flatterned Device Tree boot method                                        
IMG moving image: type 2 from 0x40100040 to 0x40008000                          
HINT: To optimize boot time adjust loadaddr to: 0x40007fc0                      
Linux entry 0x40008000                                                          
USB thresholds: in 0x20 out 0x7e                                                
Uncompressing Linux... done, booting the kernel.                                
[    0.000000] Booting Linux on physical CPU 0x0                                
[    0.000000] Linux version 3.10.28-shadow1-g0cdc7cb (rs1-unx@rs1unx) (gcc vers
ion 4.8.1 (crosstool-NG 1.19.0) ) #1 Thu Oct 15 12:43:31 MSK 2015               
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr
=00c5387d                                                                       
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruc
tion cache                                                                      
[    0.000000] Machine: Module MB77.07, model: Module MB77.07                   
[    0.000000] bootconsole [earlycon0] enabled                                  
[    0.000000] Memory policy: ECC disabled, Data cache writeback                
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag
es: 23840                                                                       
[    0.000000] Kernel command line: console=ttyS0,38400n8 earlyprintk=serial  ub
i.mtd=4,2048 root=ubi0:rootfs rootfstype=ubifs mtdparts=mnand:0x40000@0x0(boot),
0x20000@0x40000(env),0x20000@0x60000(dtb),0x400000@0x80000(kernel),0x3FB80000@0x
480000(rootfs)                                                                  
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)              
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)   
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)     
[    0.000000] Memory: 94MB 0MB = 94MB total                                    
[    0.000000] Memory: 89200k/89200k available, 41872k reserved, 0K highmem     
[    0.000000] Virtual kernel memory layout:                                    
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)                
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)                
[    0.000000]     vmalloc : 0xc8800000 - 0xff000000   ( 872 MB)                
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)                
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)                
[    0.000000]       .text : 0xc0008000 - 0xc04b1a94   (4775 kB)                
[    0.000000]       .init : 0xc04b2000 - 0xc04d533c   ( 141 kB)                
[    0.000000]       .data : 0xc04d6000 - 0xc0517df0   ( 264 kB)                
[    0.000000]        .bss : 0xc0517df0 - 0xc0597a70   ( 512 kB)                
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1       
[    0.000000] NR_IRQS:128                                                      
[    0.000000] regs = 0xf8000000, irq_start = 0                                 
[    0.000000] VIC @f8000000: id 0x00041192, vendor 0x41                        
[    0.000000] regs = 0xf8010000, irq_start = 32                                
[    0.000000] VIC @f8010000: id 0x00041192, vendor 0x41                        
[    0.000000] UEMD: Firing up timer system                                     
[    0.000000] Clocksource: rate 54000000 mult 19418074 shift 20                
[    0.000000] Clockevent: rate 54000000 mult 231928233 shift 32                
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps ever
y 4294967286ms                                                                  
[    0.000000] Console: colour dummy device 80x30                               
[    0.020000] Calibrating delay loop... 215.04 BogoMIPS (lpj=1075200)          
[    0.100000] pid_max: default: 32768 minimum: 301                             
[    0.110000] Mount-cache hash table entries: 512                              
[    0.120000] CPU: Testing write buffer coherency: ok                          
[    0.130000] Setting up static identity map for 0xc0343390 - 0xc03433c8       
[    0.150000] devtmpfs: initialized                                            
[    0.160000] NET: Registered protocol family 16                               
[    0.170000] DMA: preallocated 256 KiB pool for atomic coherent allocations   
[    0.240000] OTP ROM is not flashed                                           
[    0.250000] msvdhd: configuring memory                                       
[    0.260000] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.    
[    0.270000] hw-breakpoint: maximum watchpoint size is 4 bytes.               
[    0.410000] bio: create slab <bio-0> at 0                                    
[    0.430000] SCSI subsystem initialized                                       
[    0.440000] ssp-pl022 2002e000.ssp: ARM PL022 driver, device ID: 0x00041022  
[    0.450000] pl022: mapped registers from 0x2002e000 to f802e000              
[    0.470000] usbcore: registered new interface driver usbfs                   
[    0.480000] usbcore: registered new interface driver hub                     
[    0.490000] usbcore: registered new device driver usb                        
[    0.500000] media: Linux media interface: v0.10                              
[    0.520000] Linux video capture interface: v2.00                             
[    0.530000] Advanced Linux Sound Architecture Driver Initialized.            
[    0.550000] Switching to clocksource uemd_timer1                             
[    0.650000] NET: Registered protocol family 2                                
[    0.660000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)  
[    0.670000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)         
[    0.680000] TCP: Hash tables configured (established 1024 bind 1024)         
[    0.690000] TCP: reno registered                                             
[    0.700000] UDP hash table entries: 256 (order: 0, 4096 bytes)               
[    0.710000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)          
[    0.720000] NET: Registered protocol family 1                                
[    0.730000] RPC: Registered named UNIX socket transport module.              
[    0.740000] RPC: Registered udp transport module.                            
[    0.750000] RPC: Registered tcp transport module.                            
[    0.760000] RPC: Registered tcp NFSv4.1 backchannel transport module.        
[    0.840000] squashfs: version 4.0 (2009/01/31) Phillip Lougher               
[    0.860000] NFS: Registering the id_resolver key type                        
[    0.870000] Key type id_resolver registered                                  
[    0.880000] Key type id_legacy registered                                    
[    0.890000] msgmni has been set to 174                                       
[    0.910000] alg: No test for stdrng (krng)                                   
[    0.920000] io scheduler noop registered (default)                           
[    0.940000] fj_gpio: Added 32 gpio lines at base -981095824                  
[    0.960000] module_vdu 80173000.vdu: found VDU device at 80173000, id <ebebab
01>                                                                             
[    1.000000] Console: switching to colour frame buffer device 160x45          
[    1.040000] fb0: Module VDU frame buffer device                              
[    1.090000] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled         
[    1.110000] 2002b000.uart: ttyS0 at MMIO 0x2002b000 (irq = 7) is a 8250      
[    1.120000] console [ttyS0] enabled, bootconsole disabled                    
[    1.120000] console [ttyS0] enabled, bootconsole disabled                    
[    1.140000] 20022000.uart: ttyS1 at MMIO 0x20022000 (irq = 9) is a 8250      
[    1.150000] 2002c000.uart: ttyS2 at MMIO 0x2002c000 (irq = 8) is a 8250      
[    1.160000] [drm] Initialized drm 1.1.0 20060810                             
[    1.190000] loop: module loaded                                              
[    1.200000] msvdhd 80180000.video_decoder: found device at 0x80180000, id 0x0
025300b                                                                         
[    1.250000] EasyNMC Unified DSP Framework. (c) RC Module 2014                
[    1.260000] easynmc-nmc3: imem at phys 0x140000 virt 0xc8900000 size 0x80000 
bytes                                                                           
[    1.270000] easynmc-nmc3: HP IRQ 14 LP IRQ 15                                
[    1.280000] easynmc: registering core K1879-nmc (nmc3) with id 0             
[    1.300000] mnand CS0 Samsung size(1024) writesize(2048) oobsize(64) erasesiz
e(131072)                                                                       
[    1.310000] mnand: Bad chip id or no chip at CS1                             
[    1.320000] mnand: Detected 1073741824 bytes of NAND                         
[    1.330000] 5 cmdlinepart partitions found on MTD device mnand               
[    1.340000] Creating 5 MTD partitions on "mnand":                            
[    1.350000] 0x000000000000-0x000000040000 : "boot"                           
[    1.370000] 0x000000040000-0x000000060000 : "env"                            
[    1.390000] 0x000000060000-0x000000080000 : "dtb"                            
[    1.410000] 0x000000080000-0x000000480000 : "kernel"                         
[    1.450000] 0x000000480000-0x000040000000 : "rootfs"                         
[    6.520000] libphy: greth-mdio: probed                                       
[    6.540000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver       
[    6.550000] uemd-ehci 10040000.ehci: UEMD EHCI                               
[    6.560000] uemd-ehci 10040000.ehci: new USB bus registered, assigned bus num
ber 1                                                                           
[    6.570000] uemd-ehci 10040000.ehci: irq 35, io mem 0x10040000               
[    6.600000] uemd-ehci 10040000.ehci: USB 2.0 started, EHCI 1.00              
[    6.620000] hub 1-0:1.0: USB hub found                                       
[    6.630000] hub 1-0:1.0: 2 ports detected                                    
[    6.640000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver           
[    6.650000] usbcore: registered new interface driver usb-storage             
[    6.660000] usbcore: registered new interface driver usbserial               
[    6.670000] mousedev: PS/2 mouse device common for all mice                  
[    6.680000] i2c /dev entries driver                                          
[    6.710000] module_hdmi: module_hdmi: Device ID: 0x9132                      
[    6.720000] usbcore: registered new interface driver i2c-tiny-usb            
[    6.740000] sp805-wdt 20025000.wd: registration successful                   
[    6.760000] ledtrig-cpu: registered to indicate activity on CPUs

У меня так же виснет

anonymous ()

udev

Похоже после этого не виснет

apt-get -u -s --reinstall install udev # убирает зависания при загрузке MB77

edu08 ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.