Не работает lm_sensors. Как я понял, конфликт оборудования. Арчик обновленный, биос обновленный.
[root@localhost tux]# systemctl start lm_sensors
Job for lm_sensors.service failed because the control process exited with error code. See "systemctl status lm_sensors.service" and "journalctl -xe" for details.
[root@localhost tux]# systemctl status lm_sensors
● lm_sensors.service - Initialize hardware monitoring sensors
Loaded: loaded (/usr/lib/systemd/system/lm_sensors.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Чт 2015-06-25 21:46:38 MSK; 6min ago
Process: 291 ExecStart=/usr/bin/sensors -s (code=exited, status=1/FAILURE)
Process: 255 ExecStart=/sbin/modprobe -qab $BUS_MODULES $HWMON_MODULES (code=exited, status=1/FAILURE)
Main PID: 291 (code=exited, status=1/FAILURE)
июн 25 21:46:34 localhost systemd[1]: Starting Initialize hardware monitoring sensors...
июн 25 21:46:38 localhost sensors[291]: No sensors found!
июн 25 21:46:38 localhost sensors[291]: Make sure you loaded all the kernel drivers you need.
июн 25 21:46:38 localhost sensors[291]: Try sensors-detect to find out which these are.
июн 25 21:46:38 localhost systemd[1]: lm_sensors.service: Main process exited, code=exited, status=1/FAILURE
июн 25 21:46:38 localhost systemd[1]: Failed to start Initialize hardware monitoring sensors.
июн 25 21:46:38 localhost systemd[1]: lm_sensors.service: Unit entered failed state.
июн 25 21:46:38 localhost systemd[1]: lm_sensors.service: Failed with result 'exit-code'.
[root@localhost tux]# journalctl -xe
июн 25 10:44:05 localhost polkitd[286]: Registered Authentication Agent for unix-process:828:64767 (system bus name :1.20 [/usr/bin/pkttyagent --notify-fd 5 --fallback], object pa
июн 25 10:44:05 localhost kernel: it87: Found IT8712F chip at 0x290, revision 5
июн 25 10:44:05 localhost kernel: it87: Beeping is supported
июн 25 10:44:05 localhost kernel: ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\IP__) (2015020
июн 25 10:44:05 localhost kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
июн 25 10:44:05 localhost systemd[1]: Starting Initialize hardware monitoring sensors...
-- Subject: Начинается запуск юнита lm_sensors.service
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Начат процесс запуска юнита lm_sensors.service.
июн 25 10:44:05 localhost sensors[839]: No sensors found!
июн 25 10:44:05 localhost sensors[839]: Make sure you loaded all the kernel drivers you need.
июн 25 10:44:05 localhost sensors[839]: Try sensors-detect to find out which these are.
июн 25 10:44:05 localhost systemd[1]: lm_sensors.service: Main process exited, code=exited, status=1/FAILURE
июн 25 10:44:05 localhost systemd[1]: Failed to start Initialize hardware monitoring sensors.
-- Subject: Ошибка юнита lm_sensors.service
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Произошел сбой юнита lm_sensors.service.
--
-- Результат: failed.
июн 25 10:44:05 localhost systemd[1]: lm_sensors.service: Unit entered failed state.
июн 25 10:44:05 localhost systemd[1]: lm_sensors.service: Failed with result 'exit-code'.
июн 25 10:44:05 localhost polkitd[286]: Unregistered Authentication Agent for unix-process:828:64767 (system bus name :1.20, object path /org/freedesktop/PolicyKit1/Authentication
[root@localhost tux]# dmesg | grep OpRegion
[ 14.080616] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\IP__) (20150204/utaddress-254)
[root@localhost tux]# dmesg | grep ACPI
[ 0.000000] BIOS-e820: [mem 0x000000001f7f0000-0x000000001f7f2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001f7f3000-0x000000001f7fffff] ACPI data
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F65B0 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 0x000000001F7F3000 00002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: FACP 0x000000001F7F3040 000074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: DSDT 0x000000001F7F30C0 0038A2 (v01 GBT AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 0x000000001F7F0000 000040
[ 0.000000] ACPI: APIC 0x000000001F7F6980 000068 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.006703] ACPI: Core revision 20150204
[ 0.011079] ACPI: All ACPI Tables successfully acquired
[ 0.077587] PM: Registering ACPI NVS region [mem 0x1f7f0000-0x1f7f2fff] (12288 bytes)
[ 0.103429] ACPI: bus type PCI registered
[ 0.103434] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.140533] ACPI: Added _OSI(Module Device)
[ 0.140538] ACPI: Added _OSI(Processor Device)
[ 0.140540] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.140542] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.144263] ACPI: Interpreter enabled
[ 0.144286] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.144293] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150204/hwxface-580)
[ 0.144309] ACPI: (supports S0 S1 S4 S5)
[ 0.144313] ACPI: Using IOAPIC for interrupt routing
[ 0.144358] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.150166] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.150983] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.151171] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.151358] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.151597] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.151744] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.151893] pci 0000:00:1f.0: can't claim BAR 13 [io 0x4000-0x407f]: address conflict with ACPI PM1a_EVT_BLK [io 0x4000-0x4003]
[ 0.153891] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.153989] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.154085] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.154180] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.154275] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.154372] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.154467] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.154563] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.155014] PCI: Using ACPI for IRQ routing
[ 0.166155] pnp: PnP ACPI init
[ 0.166700] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.166828] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.166898] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.167141] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.167444] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.167764] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.168164] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.168347] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.168417] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.168772] pnp 00:09: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.169015] pnp: PnP ACPI: found 10 devices
[ 1.059169] ACPI: bus type USB registered
[ 9.473101] ACPI: Power Button [PWRB]
[ 9.473211] ACPI: Sleep Button [SLPB]
[ 9.473313] ACPI: Power Button [PWRF]
[ 10.426756] parport_pc 00:06: reported by Plug and Play ACPI
[ 14.080616] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\IP__) (20150204/utaddress-254)
[ 14.080626] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Полный dmesg http://pastebin.com/sgbF519T
Как лучше поправить? Менее костыльно? Или подождать пока прилетит lm-sensors 3.4?