LINUX.ORG.RU

Чудеса с приводом


0

0

Не могу записать CD-R.
В graveman добавляю файлы (CD с данными), нажимаю запись.
Идет запись, а под конец появляется сообщение "Запись не удалась!"

Самое забавное что запись идет и с вставленным CD и без него. Скорость всегда одинаковая.
В настройках выбрана моя Toshiba (/dev/hdc). Настройки никакие не трогал - все равно не разберусь.

graveman-0.3.12

Ответ на: Re: Чудеса с приводом от pisun

Re: Чудеса с приводом

bash-2.05b$ cdrecord ./d1.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent default s.
cdrecord: Continuing in 5 seconds...
cdrecord: No CD/DVD-Recorder device specified.
Usage: cdrecord [options] track1...trackn

Use cdrecord -help
to get a list of valid options.

Use cdrecord blank=help
to get a list of valid blanking options.

Use cdrecord dev=b,t,l driveropts=help -checkdrive
to get a list of drive specific options.

Use cdrecord dev=help
to get a list of possible SCSI transport specifiers.
bash-2.05b$


Чего ему надо?

necrose ()
Ответ на: Re: Чудеса с приводом от JB

Re: Чудеса с приводом

bash-2.05b$ cdrecord dev=ATAPI -scanbus
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 JЖrg Schilling
on-the-fly encryption (version 1.0-rc1) built-in, (C) 2004,2005 Maximilian Decker

NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <burbon04 at gmx.de>.
      For more information please see http://burbon04.gmxhome.de/linux/CDREncryption.html.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.11-gentoo-r4
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
scsibus0:
        0,0,0     0) 'TOSHIBA ' 'ODD-DVD SD-R1512' '1010' Removable CD-ROM
        0,1,0     1) *
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *

necrose ()
Ответ на: Re: Чудеса с приводом от JB

Re: Чудеса с приводом

bash-2.05b$ cdrecord dev=0,0,0 d1.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 JЖrg Schilling
on-the-fly encryption (version 1.0-rc1) built-in, (C) 2004,2005 Maximilian Decker

NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <burbon04 at gmx.de>.
For more information please see http://burbon04.gmxhome.de/linux/CDREncryption.html.
The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.11-gentoo-r4
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
cdrecord: No such file or directory. Cannot open '/dev/pg0'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
bash-2.05b$

necrose ()
Ответ на: Re: Чудеса с приводом от JB

Re: Чудеса с приводом

dev=0,0,0 - показывает на скази диск.

Тут надо dev=ATAPI:0,0,0, а лучше(о чём собственно и говорит cdrecord) запускать

cdrecord dev=/dev/hdc file.iso

Ну и маны читать тоже надо. а не советовать из головы :)

Deleted ()

Re: Чудеса с приводом

Как в graveman кодировку фс менять, чтобы в винде русские названия видно было нормально?

anonymous ()
Ответ на: Re: Чудеса с приводом от Deleted

Re: Чудеса с приводом

bash-2.05b$ cdrecord dev=/dev/hdc d1.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent default s.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 JЖrg Schilling
on-the-fly encryption (version 1.0-rc1) built-in, (C) 2004,2005 Maximilian Decke r

NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <burbon04 at gmx.de>.
      For more information please see http://burbon04.gmxhome.de/linux/CDREncryp tion.html.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.11-gentoo-r4
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'TOSHIBA '
Identifikation : 'ODD-DVD SD-R1512'
Revision       : '1010'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
cdrecord: WARNING: Data may not fit on current disk.
cdrecord: Notice: Most recorders cannot write CD's >= 90 minutes.
cdrecord: Notice: Use -ignsize option to allow >= 90 minutes.
cdrecord: Notice: Use -overburn option to write more than the official disk capa city.
cdrecord: Notice: Most CD-writers do overburning only on SAO or RAW mode.
bash-2.05b$


bash-2.05b$ cdrecord dev=ATAPI:0,0,0 d1.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 JЖrg Schilling
on-the-fly encryption (version 1.0-rc1) built-in, (C) 2004,2005 Maximilian Decker

NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <burbon04 at gmx.de>.
      For more information please see http://burbon04.gmxhome.de/linux/CDREncryption.html.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.11-gentoo-r4
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'TOSHIBA '
Identifikation : 'ODD-DVD SD-R1512'
Revision       : '1010'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes:
cdrecord: Drive does not support TAO recording.
cdrecord: Illegal write mode for this drive.
bash-2.05b$

necrose ()
Ответ на: Re: Чудеса с приводом от snigga

Re: Чудеса с приводом

bash-2.05b$ cdrecord -data -dao -v dev=/dev/hdc d1.iso
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 JЖrg Schilling
on-the-fly encryption (version 1.0-rc1) built-in, (C) 2004,2005 Maximilian Decker

NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <burbon04 at gmx.de>.
      For more information please see http://burbon04.gmxhome.de/linux/CDREncryption.html.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.11-gentoo-r4
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
TOC Type: 1 = CD-ROM
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'TOSHIBA '
Identifikation : 'ODD-DVD SD-R1512'
Revision       : '1010'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x0009
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1791936 = 1749 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data   917 MB
Total size:     1053 MB (104:23.69) = 469777 sectors
Lout start:     1054 MB (104:25/52) = 469777 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, low Beta category (A-) (2)
  ATIP start of lead in:  -11740 (97:25/35)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: -109928
cdrecord: WARNING: Data may not fit on current disk.
cdrecord: Notice: Most recorders cannot write CD's >= 90 minutes.
cdrecord: Notice: Use -ignsize option to allow >= 90 minutes.
cdrecord: Notice: Use -overburn option to write more than the official disk capacity.
cdrecord: Notice: Most CD-writers do overburning only on SAO or RAW mode.
bash-2.05b$

necrose ()

Re: Чудеса с приводом

Похоже разобрался.
Перекомпилировал ядро с эмуляцией скази не модулем, а... ядром(простите за тавтологию).

Но это странно, ведь я раньше грузил модуль ide-scsi и не работало.
При этом graveman пишет, а cdrecord выдает все туже информацию, даже не задумываясь (раньше нужно было подождать секунды две).

НИФИГА!!!

Работает так: делаешь образ в graveman и сохраняешь его. Потом все в том же graveman выбираешь копировать CD и в качестве истонника берешь тот самый образ.

А на прямую никак - пишет себе что-то, куда-то...

Но хоть так работает.

necrose ()
Ответ на: Re: Чудеса с приводом от necrose

Re: Чудеса с приводом

> Перекомпилировал ядро с эмуляцией скази не модулем, а... ядром

нахрена спрашивается в 2.6 использовать эмуляцию scsi?

JB ★★★★★ ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.