LINUX.ORG.RU

Не определяется телефон по adb ошибка List of devices attached

 ,


0

1

lsusb

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b49f Chicony Electronics Co., Ltd Bluetooth Radio 
Bus 001 Device 002: ID 174f:1169 Syntek Lenovo EasyCamera
Bus 001 Device 011: ID 19d2:0452 ZTE WCDMA Technologies MSM ZTE 2050
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg | grep -i usb

 [    0.206921] ACPI: Power Resource [USBC] (on)
[    0.393527] ACPI: bus type USB registered
[    0.393527] usbcore: registered new interface driver usbfs
[    0.393527] usbcore: registered new interface driver hub
[    0.393527] usbcore: registered new device driver usb
[    1.057948] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.058015] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.058063] uhci_hcd: USB Universal Host Controller Interface driver
[    1.614455] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.615807] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[    1.615813] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.615817] usb usb1: Product: xHCI Host Controller
[    1.615820] usb usb1: Manufacturer: Linux 5.11.0-38-generic xhci-hcd
[    1.615823] usb usb1: SerialNumber: 0000:00:14.0
[    1.616062] hub 1-0:1.0: USB hub found
[    1.619086] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.619095] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.619220] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[    1.619226] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.619230] usb usb2: Product: xHCI Host Controller
[    1.619233] usb usb2: Manufacturer: Linux 5.11.0-38-generic xhci-hcd
[    1.619236] usb usb2: SerialNumber: 0000:00:14.0
[    1.619468] hub 2-0:1.0: USB hub found
[    1.952725] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[    2.118918] usb 1-3: New USB device found, idVendor=174f, idProduct=1169, bcdDevice= 1.05
[    2.118946] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.118961] usb 1-3: Product: Lenovo EasyCamera
[    2.118972] usb 1-3: Manufacturer: 150803003602
[    2.118982] usb 1-3: SerialNumber: 200901010001
[    2.248684] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[    2.397895] usb 1-4: New USB device found, idVendor=04f2, idProduct=b49f, bcdDevice= 2.00
[    2.397906] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.397910] usb 1-4: Product: Bluetooth Radio 
[    2.397913] usb 1-4: Manufacturer: Realtek 
[    2.397916] usb 1-4: SerialNumber: 00e04c000001
[   21.867625] usbcore: registered new interface driver btusb
[   25.974738] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input8
[   25.975237] usbcore: registered new interface driver uvcvideo
[   25.975242] USB Video Class driver (1.1.1)
[  220.168166] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[  220.317428] usb 1-2: New USB device found, idVendor=19d2, idProduct=0452, bcdDevice= 2.23
[  220.317439] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  220.317443] usb 1-2: Product: ZTE 2050
[  220.317446] usb 1-2: Manufacturer: ZTE
[  220.317449] usb 1-2: SerialNumber: 3414160191
[  220.317661] usb 1-2: Device is not authorized for usage
[  573.795505] usb 1-2: USB disconnect, device number 4
[  574.226762] usb 1-2: new high-speed USB device number 5 using xhci_hcd
[  574.375688] usb 1-2: New USB device found, idVendor=0e8d, idProduct=20ff, bcdDevice= 2.23
[  574.375698] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  574.375702] usb 1-2: Product: ZTE 2050
[  574.375705] usb 1-2: Manufacturer: ZTE
[  574.375708] usb 1-2: SerialNumber: 3414160191
[  574.375901] usb 1-2: Device is not authorized for usage
[  577.432259] usb 1-2: USB disconnect, device number 5
[  577.850558] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[  578.000443] usb 1-2: New USB device found, idVendor=19d2, idProduct=0452, bcdDevice= 2.23
[  578.000455] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  578.000459] usb 1-2: Product: ZTE 2050
[  578.000462] usb 1-2: Manufacturer: ZTE
[  578.000465] usb 1-2: SerialNumber: 3414160191
[  578.000688] usb 1-2: Device is not authorized for usage
[  814.574466] usb 1-2: USB disconnect, device number 6
[  815.007369] usb 1-2: new high-speed USB device number 7 using xhci_hcd
[  815.156476] usb 1-2: New USB device found, idVendor=0e8d, idProduct=20ff, bcdDevice= 2.23
[  815.156508] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  815.156524] usb 1-2: Product: ZTE 2050
[  815.156537] usb 1-2: Manufacturer: ZTE
[  815.156549] usb 1-2: SerialNumber: 3414160191
[  815.157105] usb 1-2: Device is not authorized for usage
[  819.330353] usb 1-2: USB disconnect, device number 7
[  819.755488] usb 1-2: new high-speed USB device number 8 using xhci_hcd
[  819.904766] usb 1-2: New USB device found, idVendor=19d2, idProduct=0452, bcdDevice= 2.23
[  819.904793] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  819.904809] usb 1-2: Product: ZTE 2050
[  819.904820] usb 1-2: Manufacturer: ZTE
[  819.904830] usb 1-2: SerialNumber: 3414160191
[  819.905479] usb 1-2: Device is not authorized for usage
[  986.857803] usb 1-2: USB disconnect, device number 8
[  989.917634] usb 1-2: new high-speed USB device number 9 using xhci_hcd
[  990.066843] usb 1-2: New USB device found, idVendor=19d2, idProduct=0452, bcdDevice= 2.23
[  990.066880] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  990.066900] usb 1-2: Product: ZTE 2050
[  990.066914] usb 1-2: Manufacturer: ZTE
[  990.066928] usb 1-2: SerialNumber: 3414160191
[  990.067585] usb 1-2: Device is not authorized for usage
[ 1746.315724] usb 1-2: USB disconnect, device number 9
[ 1746.634156] usb 1-2: new high-speed USB device number 10 using xhci_hcd
[ 1746.783627] usb 1-2: New USB device found, idVendor=19d2, idProduct=0452, bcdDevice= 2.23
[ 1746.783659] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1746.783676] usb 1-2: Product: ZTE 2050
[ 1746.783688] usb 1-2: Manufacturer: ZTE
[ 1746.783700] usb 1-2: SerialNumber: 3414160191
[ 1746.784264] usb 1-2: Device is not authorized for usage
[ 1751.617697] usb 1-2: USB disconnect, device number 10
[ 1751.926300] usb 1-2: new high-speed USB device number 11 using xhci_hcd
[ 1752.075723] usb 1-2: New USB device found, idVendor=19d2, idProduct=0452, bcdDevice= 2.23
[ 1752.075751] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1752.075766] usb 1-2: Product: ZTE 2050
[ 1752.075777] usb 1-2: Manufacturer: ZTE
[ 1752.075787] usb 1-2: SerialNumber: 3414160191
[ 1752.076278] usb 1-2: Device is not authorized for usage

/etc/udev/rules.d/51-android.rules

 SUBSYSTEM=="usb", ATTR{idVendor}=="19d2", MODE="0666", GROUP="plugdev"

/etc/udev/rules.d/51-android-usb.rules

 SUBSYSTEM=="usb", ATTR{idVendor}=="19d2", MODE="0666", GROUP="plugdev"

adb devices

List of devices attached

Вот какие пакеты я трогал чтоб сломать все

sudo apt reinstall mtp*
sudo apt reinstall libmtp*
sudo apt reinstall usb*
sudo apt reinstall libusb*
sudo apt reinstall udev*
sudo apt reinstall jmtpf*


Ответ на: комментарий от anonymous

я переустановил опять эти пакеты и еще кое чего

sudo apt reinstall mtp*
sudo apt reinstall libmtp*
sudo apt reinstall usb*
sudo apt reinstall libusb*
sudo apt reinstall udev*
sudo apt reinstall libudev*
sudo apt reinstall jmtpf*

sudo apt reinstall adb*
sudo apt reinstall fastboot*

и он начал определчтся НО при установке img не может его найти тобишь телефон

sudo fastboot flash recovery '/home/start/Download/zteP/TWRP/recovery.img' 
< waiting for any device >

Epizot ()
Последнее исправление: Epizot (всего исправлений: 1)
Ответ на: комментарий от Epizot

Сорь, я не понимаю, когда знаков препинания настолько нет.

в режиме fastboot другие vid/pid могут быть, посмотри список устройств после переключения андроида в этот режим и по необходимости дополни файл ещё одним правилом.

izzholtik ★★★ ()
Ответ на: комментарий от izzholtik

раньше я вобще никаких правил не создавал и все работало я сейчас обновляюсь до 21.04 может поможет

Epizot ()
Последнее исправление: Epizot (всего исправлений: 1)
Ограничение на отправку комментариев: только для зарегистрированных пользователей