LINUX.ORG.RU

Не запускается Cinnamon

 ,


0

1

Всем здравствуйте! Проблема уже избитая но все же - при запуске системы не запускается графическая оболочка, она у меня по умолчанию Cinnamon, система загружается в консоль и все, гуглил, пробовал: 1. exec cinnamon результат: unable to init server: Could not connect: Connection refused Cinnamon error: Unable to open X display 2. exec-cinnamon-session Такой же результат плюс еще - Cannot open display Зато если в консоли выполнить startx то без проблем запускается KDE Вот Xorg.0.log

[1823.321]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[  1823.324] X Protocol Version 11, Revision 0
[  1823.325] Build Operating System: openSUSE SUSE LINUX
[  1823.326] Current Operating System: Linux Hata-PC.HomeGateway 4.16.12-2-default #1 SMP PREEMPT Fri May 25 18:40:19 UTC 2018 (39c7522) x86_64
[  1823.326] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.12-2-default root=UUID=3008f3e9-8edd-4a80-8908-c77957c90b7a resume=/dev/sda7 splash=silent quiet showopts
[  1823.329] Build Date: 17 April 2018  12:00:00PM
[  1823.330]  
[  1823.330] Current version of pixman: 0.34.0
[  1823.332] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1823.332] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1823.335] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 24 13:54:41 2018
[  1823.337] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1823.338] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1823.339] (==) No Layout section.  Using the first Screen section.
[  1823.339] (==) No screen section available. Using defaults.
[  1823.339] (**) |-->Screen "Default Screen Section" (0)
[  1823.339] (**) |   |-->Monitor "<default monitor>"
[  1823.339] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1823.339] (==) Automatically adding devices
[  1823.339] (==) Automatically enabling devices
[  1823.339] (==) Automatically adding GPU devices
[  1823.339] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1823.339] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[  1823.339] 	Entry deleted from font path.
[  1823.339] (==) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/ghostscript/,
	/usr/share/fonts/cyrillic:unscaled,
	/usr/share/fonts/truetype/,
	built-ins
[  1823.339] (==) ModulePath set to "/usr/lib64/xorg/modules"
[  1823.339] (**) Extension "XFree86-DGA" is disabled
[  1823.339] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1823.339] (II) Loader magic: 0x5608c3b24ce0
[  1823.339] (II) Module ABI versions:
[  1823.339] 	X.Org ANSI C Emulation: 0.4
[  1823.339] 	X.Org Video Driver: 23.0
[  1823.339] 	X.Org XInput driver : 24.1
[  1823.339] 	X.Org Server Extension : 10.0
[  1823.340] (++) using VT number 1

[  1823.343] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[  1823.344] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1823.345] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[  1823.350] (--) PCI:*(0:0:2:0) 8086:0116:1043:14f7 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[  1823.350] (II) LoadModule: "glx"
[  1823.350] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[  1823.352] (II) Module glx: vendor="X.Org Foundation"
[  1823.352] 	compiled for 1.19.6, module version = 1.0.0
[  1823.352] 	ABI class: X.Org Server Extension, version 10.0
[  1823.352] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
[  1823.352] (II) Scanning /etc/X11/xorg_pci_ids directory for additional PCI ID's supported by the drivers
[  1823.352] (==) Matched intel as autoconfigured driver 0
[  1823.352] (==) Matched intel as autoconfigured driver 1
[  1823.352] (==) Matched modesetting as autoconfigured driver 2
[  1823.352] (==) Matched fbdev as autoconfigured driver 3
[  1823.352] (==) Matched vesa as autoconfigured driver 4
[  1823.352] (==) Assigned the driver to the xf86ConfigLayout
[  1823.352] (II) LoadModule: "intel"
[  1823.352] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[  1823.352] (II) Module intel: vendor="X.Org Foundation"
[  1823.352] 	compiled for 1.19.6, module version = 2.99.917
[  1823.353] 	Module class: X.Org Video Driver
[  1823.353] 	ABI class: X.Org Video Driver, version 23.0
[  1823.353] (II) LoadModule: "modesetting"
[  1823.353] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[  1823.353] (II) Module modesetting: vendor="X.Org Foundation"
[  1823.353] 	compiled for 1.19.6, module version = 1.19.6
[  1823.353] 	Module class: X.Org Video Driver
[  1823.353] 	ABI class: X.Org Video Driver, version 23.0
[  1823.353] (II) LoadModule: "fbdev"
[  1823.353] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[  1823.353] (II) Module fbdev: vendor="X.Org Foundation"
[  1823.353] 	compiled for 1.19.6, module version = 0.5.0
[  1823.353] 	Module class: X.Org Video Driver
[  1823.353] 	ABI class: X.Org Video Driver, version 23.0
[  1823.353] (II) LoadModule: "vesa"
[  1823.353] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[  1823.354] (II) Module vesa: vendor="X.Org Foundation"
[  1823.354] 	compiled for 1.19.6, module version = 2.4.0
[  1823.354] 	Module class: X.Org Video Driver
[  1823.354] 	ABI class: X.Org Video Driver, version 23.0
[  1823.354] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[  1823.354] (II) intel: Driver for Intel(R) HD Graphics
[  1823.354] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[  1823.354] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[  1823.354] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  1823.354] (II) FBDEV: driver for framebuffer: fbdev
[  1823.354] (II) VESA: driver for VESA chipsets: vesa
[  1823.354] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20171222
[  1823.372] (WW) Falling back to old probe method for modesetting
[  1823.372] (WW) Falling back to old probe method for fbdev
[  1823.372] (II) Loading sub module "fbdevhw"
[  1823.373] (II) LoadModule: "fbdevhw"
[  1823.373] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[  1823.373] (II) Module fbdevhw: vendor="X.Org Foundation"
[  1823.373] 	compiled for 1.19.6, module version = 0.0.2
[  1823.373] 	ABI class: X.Org Video Driver, version 23.0
[  1823.374] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[  1823.374] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[  1823.374] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1823.374] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  1823.374] (==) intel(0): RGB weight 888
[  1823.374] (==) intel(0): Default visual is TrueColor
[  1823.374] (II) intel(0): Output LVDS1 has no monitor section
[  1823.375] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[  1823.375] (II) intel(0): Enabled output LVDS1
[  1823.375] (II) intel(0): Output VGA1 has no monitor section
[  1823.375] (II) intel(0): Enabled output VGA1
[  1823.375] (II) intel(0): Output HDMI1 has no monitor section
[  1823.375] (II) intel(0): Enabled output HDMI1
[  1823.375] (II) intel(0): Output DP1 has no monitor section
[  1823.375] (II) intel(0): Enabled output DP1
[  1823.375] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[  1823.376] (II) intel(0): Output VIRTUAL1 has no monitor section
[  1823.376] (II) intel(0): Enabled output VIRTUAL1
[  1823.376] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[  1823.376] (==) intel(0): TearFree disabled
[  1823.376] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[  1823.376] (==) intel(0): DPI set to (96, 96)
[  1823.376] (II) Loading sub module "dri3"
[  1823.376] (II) LoadModule: "dri3"
[  1823.376] (II) Module "dri3" already built-in
[  1823.376] (II) Loading sub module "dri2"
[  1823.376] (II) LoadModule: "dri2"
[  1823.376] (II) Module "dri2" already built-in
[  1823.376] (II) Loading sub module "present"
[  1823.376] (II) LoadModule: "present"
[  1823.376] (II) Module "present" already built-in
[  1823.376] (II) UnloadModule: "modesetting"
[  1823.376] (II) Unloading modesetting
[  1823.376] (II) UnloadModule: "fbdev"
[  1823.376] (II) Unloading fbdev
[  1823.376] (II) UnloadSubModule: "fbdevhw"
[  1823.377] (II) Unloading fbdevhw
[  1823.377] (II) UnloadModule: "vesa"
[  1823.377] (II) Unloading vesa
[  1823.377] (==) Depth 24 pixmap format is 32 bpp
[  1823.377] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[  1823.377] (==) intel(0): Backing store enabled
[  1823.377] (==) intel(0): Silken mouse enabled
[  1823.377] (II) intel(0): HW Cursor enabled
[  1823.378] (==) intel(0): DPMS enabled
[  1823.378] (==) intel(0): Display hotplug detection enabled
[  1823.378] (II) intel(0): [DRI2] Setup complete
[  1823.378] (II) intel(0): [DRI2]   DRI driver: i965
[  1823.378] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[  1823.378] (II) intel(0): direct rendering: DRI2 enabled
[  1823.378] (II) intel(0): hardware support for Present enabled
[  1823.397] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  1823.397] (II) AIGLX: enabled GLX_ARB_create_context
[  1823.397] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  1823.397] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[  1823.397] (II) AIGLX: enabled GLX_INTEL_swap_event
[  1823.397] (II) AIGLX: enabled GLX_SGI_swap_control
[  1823.397] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  1823.397] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  1823.397] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[  1823.397] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  1823.397] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[  1823.398] (II) AIGLX: Loaded and initialized i965
[  1823.398] (II) GLX: Initialized DRI2 GL provider for screen 0
[  1823.399] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[  1823.400] (II) intel(0): Setting screen physical size to 361 x 203
[  1823.482] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  1823.482] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1823.482] (**) Power Button: Applying InputClass "system-keyboard"
[  1823.482] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  1823.482] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1823.482] (II) LoadModule: "libinput"
[  1823.482] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[  1823.483] (II) Module libinput: vendor="X.Org Foundation"
[  1823.483] 	compiled for 1.19.6, module version = 0.27.1
[  1823.483] 	Module class: X.Org XInput Driver
[  1823.483] 	ABI class: X.Org XInput driver, version 24.1
[  1823.484] (II) Using input driver 'libinput' for 'Power Button'
[  1823.485] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0
[  1823.485] (**) Power Button: always reports core events
[  1823.485] (**) Option "Device" "/dev/input/event3"
[  1823.486] (**) Option "_source" "server/udev"
[  1823.487] (II) event3  - Power Button: is tagged by udev as: Keyboard
[  1823.487] (II) event3  - Power Button: device is a keyboard
[  1823.487] (II) event3  - Power Button: device removed
[  1823.487] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input11/event3"
[  1823.487] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1823.487] (**) Option "xkb_model" "microsoftpro"
[  1823.487] (**) Option "xkb_layout" "us,ru"
[  1823.487] (**) Option "xkb_variant" ",winkeys"
[  1823.487] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[  1823.522] (II) event3  - Power Button: is tagged by udev as: Keyboard
[  1823.522] (II) event3  - Power Button: device is a keyboard
[  1823.523] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[  1823.523] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1823.523] (**) Video Bus: Applying InputClass "system-keyboard"
[  1823.523] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  1823.523] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  1823.523] (II) Using input driver 'libinput' for 'Video Bus'
[  1823.525] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[  1823.525] (**) Video Bus: always reports core events
[  1823.525] (**) Option "Device" "/dev/input/event4"
[  1823.525] (**) Option "_source" "server/udev"
[  1823.527] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[  1823.527] (II) event4  - Video Bus: device is a keyboard
[  1823.527] (II) event4  - Video Bus: device removed
[  1823.527] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12/event4"
[  1823.527] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  1823.527] (**) Option "xkb_model" "microsoftpro"
[  1823.527] (**) Option "xkb_layout" "us,ru"
[  1823.527] (**) Option "xkb_variant" ",winkeys"
[  1823.527] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[  1823.528] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[  1823.528] (II) event4  - Video Bus: device is a keyboard
[  1823.530] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[  1823.530] (II) No input driver specified, ignoring this device.
[  1823.530] (II) This device may have been added with another device file.
[  1823.531] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  1823.531] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1823.531] (**) Sleep Button: Applying InputClass "system-keyboard"
[  1823.531] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  1823.531] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[  1823.531] (II) Using input driver 'libinput' for 'Sleep Button'
[  1823.533] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 28 paused 0
[  1823.533] (**) Sleep Button: always reports core events
[  1823.533] (**) Option "Device" "/dev/input/event2"
[  1823.533] (**) Option "_source" "server/udev"
[  1823.534] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[  1823.534] (II) event2  - Sleep Button: device is a keyboard
[  1823.534] (II) event2  - Sleep Button: device removed
[  1823.534] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event2"
[  1823.534] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[  1823.534] (**) Option "xkb_model" "microsoftpro"
[  1823.534] (**) Option "xkb_layout" "us,ru"
[  1823.534] (**) Option "xkb_variant" ",winkeys"
[  1823.534] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[  1823.536] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[  1823.536] (II) event2  - Sleep Button: device is a keyboard
[  1823.537] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/event5)
[  1823.537] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[  1823.537] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[  1823.537] (**)  USB OPTICAL MOUSE: Applying InputClass "libinput pointer catchall"
[  1823.537] (II) Using input driver 'libinput' for ' USB OPTICAL MOUSE'
[  1823.597] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 29 paused 0
[  1823.597] (**)  USB OPTICAL MOUSE: always reports core events
[  1823.597] (**) Option "Device" "/dev/input/event5"
[  1823.597] (**) Option "_source" "server/udev"
[  1823.598] (II) event5  -  USB OPTICAL MOUSE: is tagged by udev as: Mouse
[  1823.598] (II) event5  -  USB OPTICAL MOUSE: device is a pointer
[  1823.599] (II) event5  -  USB OPTICAL MOUSE: device removed
[  1823.599] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0000:0538.0001/input/input13/event5"
[  1823.599] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 9)
[  1823.599] (**) Option "AccelerationScheme" "none"
[  1823.599] (**)  USB OPTICAL MOUSE: (accel) selected scheme none/0
[  1823.599] (**)  USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[  1823.599] (**)  USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[  1823.601] (II) event5  -  USB OPTICAL MOUSE: is tagged by udev as: Mouse
[  1823.601] (II) event5  -  USB OPTICAL MOUSE: device is a pointer
[  1823.602] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/mouse0)
[  1823.602] (II) No input driver specified, ignoring this device.
[  1823.602] (II) This device may have been added with another device file.
[  1823.603] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event8)
[  1823.604] (II) No input driver specified, ignoring this device.
[  1823.604] (II) This device may have been added with another device file.
[  1823.604] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[  1823.605] (II) No input driver specified, ignoring this device.
[  1823.605] (II) This device may have been added with another device file.
[  1823.606] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[  1823.606] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1823.606] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[  1823.606] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  1823.606] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[  1823.606] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[  1823.607] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 30 paused 0
[  1823.607] (**) Asus WMI hotkeys: always reports core events
[  1823.607] (**) Option "Device" "/dev/input/event7"
[  1823.607] (**) Option "_source" "server/udev"
[  1823.607] (II) event7  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[  1823.608] (II) event7  - Asus WMI hotkeys: device is a keyboard
[  1823.608] (II) event7  - Asus WMI hotkeys: device removed
[  1823.608] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event7"
[  1823.608] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 10)
[  1823.608] (**) Option "xkb_model" "microsoftpro"
[  1823.608] (**) Option "xkb_layout" "us,ru"
[  1823.608] (**) Option "xkb_variant" ",winkeys"
[  1823.608] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[  1823.608] (II) event7  - Asus WMI hotkeys: is tagged by udev as: Keyboard
[  1823.608] (II) event7  - Asus WMI hotkeys: device is a keyboard
[  1823.609] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  1823.609] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1823.609] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[  1823.609] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  1823.609] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[  1823.609] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[  1823.610] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 31 paused 0
[  1823.610] (**) AT Translated Set 2 keyboard: always reports core events
[  1823.610] (**) Option "Device" "/dev/input/event0"
[  1823.610] (**) Option "_source" "server/udev"
[  1823.610] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  1823.610] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[  1823.610] (II) event0  - AT Translated Set 2 keyboard: device removed
[  1823.610] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  1823.610] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[  1823.610] (**) Option "xkb_model" "microsoftpro"
[  1823.610] (**) Option "xkb_layout" "us,ru"
[  1823.610] (**) Option "xkb_variant" ",winkeys"
[  1823.610] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[  1823.611] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[  1823.611] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[  1823.611] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[  1823.611] (II) No input driver specified, ignoring this device.
[  1823.611] (II) This device may have been added with another device file.
[  1823.612] (II) config/udev: Adding input device (unnamed) (/dev/ttyS0)
[  1823.612] (II) No input driver specified, ignoring this device.
[  1823.612] (II) This device may have been added with another device file.
[  1823.612] (II) config/udev: Adding input device (unnamed) (/dev/ttyS1)
[  1823.612] (II) No input driver specified, ignoring this device.
[  1823.612] (II) This device may have been added with another device file.
[  1823.612] (II) config/udev: Adding input device (unnamed) (/dev/ttyS10)
[  1823.612] (II) No input driver specified, ignoring this device.
[  1823.612] (II) This device may have been added with another device file.
[  1823.612] (II) config/udev: Adding input device (unnamed) (/dev/ttyS11)
[  1823.612] (II) No input driver specified, ignoring this device.
[  1823.612] (II) This device may have been added with another device file.
[  1823.613] (II) config/udev: Adding input device (unnamed) (/dev/ttyS12)
[  1823.613] (II) No input driver specified, ignoring this device.
[  1823.613] (II) This device may have been added with another device file.
[  1823.613] (II) config/udev: Adding input device (unnamed) (/dev/ttyS13)
[  1823.613] (II) No input driver specified, ignoring this device.
[  1823.613] (II) This device may have been added with another device file.
[  1823.613] (II) config/udev: Adding input device (unnamed) (/dev/ttyS14)
[  1823.613] (II) No input driver specified, ignoring this device.
[  1823.613] (II) This device may have been added with another device file.
[  1823.613] (II) config/udev: Adding input device (unnamed) (/dev/ttyS15)
[  1823.613] (II) No input driver specified, ignoring this device.
[  1823.613] (II) This device may have been added with another device file.
[  1823.613] (II) config/udev: Adding input device (unnamed) (/dev/ttyS16)
[  1823.613] (II) No input driver specified, ignoring this device.
[  1823.613] (II) This device may have been added with another device file.
[  1823.614] (II) config/udev: Adding input device (unnamed) (/dev/ttyS17)
[  1823.614] (II) No input driver specified, ignoring this device.
[  1823.614] (II) This device may have been added with another device file.
[  1823.614] (II) config/udev: Adding input device (unnamed) (/dev/ttyS18)
[  1823.614] (II) No input driver specified, ignoring this device.
[  1823.614] (II) This device may have been added with another device file.
[  1823.614] (II) config/udev: Adding input device (unnamed) (/dev/ttyS19)
[  1823.614] (II) No input driver specified, ignoring this device.
[  1823.614] (II) This device may have been added with another device file.
[  1823.614] (II) config/udev: Adding input device (unnamed) (/dev/ttyS2)
[  1823.614] (II) No input driver specified, ignoring this device.
[  1823.614] (II) This device may have been added with another device file.
[  1823.614] (II) config/udev: Adding input device (unnamed) (/dev/ttyS20)
[  1823.614] (II) No input driver specified, ignoring this device.
[  1823.614] (II) This device may have been added with another device file.
[  1823.615] (II) config/udev: Adding input device (unnamed) (/dev/ttyS21)
[  1823.615] (II) No input driver specified, ignoring this device.
[  1823.615] (II) This device may have been added with another device file.
[  1823.615] (II) config/udev: Adding input device (unnamed) (/dev/ttyS22)
[  1823.615] (II) No input driver specified, ignoring this device.
[  1823.615] (II) This device may have been added with another device file.
[  1823.615] (II) config/udev: Adding input device (unnamed) (/dev/ttyS23)
[  1823.615] (II) No input driver specified, ignoring this device.
[  1823.615] (II) This device may have been added with another device file.
[  1823.615] (II) config/udev: Adding input device (unnamed) (/dev/ttyS24)
[  1823.615] (II) No input driver specified, ignoring this device.
[  1823.615] (II) This device may have been added with another device file.
[  1823.615] (II) config/udev: Adding input device (unnamed) (/dev/ttyS25)
[  1823.615] (II) No input driver specified, ignoring this device.
[  1823.615] (II) This device may have been added with another device file.
[  1823.616] (II) config/udev: Adding input device (unnamed) (/dev/ttyS26)
[  1823.616] (II) No input driver specified, ignoring this device.
[  1823.616] (II) This device may have been added with another device file.
[  1823.616] (II) config/udev: Adding input device (unnamed) (/dev/ttyS27)
[  1823.616] (II) No input driver specified, ignoring this device.
[  1823.616] (II) This device may have been added with another device file.
[  1823.616] (II) config/udev: Adding input device (unnamed) (/dev/ttyS28)
[  1823.616] (II) No input driver specified, ignoring this device.
[  1823.616] (II) This device may have been added with another device file.
[  1823.616] (II) config/udev: Adding input device (unnamed) (/dev/ttyS29)
[  1823.616] (II) No input driver specified, ignoring this device.
[  1823.616] (II) This device may have been added with another device file.
[  1823.616] (II) config/udev: Adding input device (unnamed) (/dev/ttyS3)
[  1823.616] (II) No input driver specified, ignoring this device.
[  1823.616] (II) This device may have been added with another device file.
[  1823.617] (II) config/udev: Adding input device (unnamed) (/dev/ttyS30)
[  1823.617] (II) No input driver specified, ignoring this device.
[  1823.617] (II) This device may have been added with another device file.
[  1823.617] (II) config/udev: Adding input device (unnamed) (/dev/ttyS31)
[  1823.617] (II) No input driver specified, ignoring this device.
[  1823.617] (II) This device may have been added with another device file.
[  1823.617] (II) config/udev: Adding input device (unnamed) (/dev/ttyS4)
[  1823.617] (II) No input driver specified, ignoring this device.
[  1823.617] (II) This device may have been added with another device file.
[  1823.617] (II) config/udev: Adding input device (unnamed) (/dev/ttyS5)
[  1823.617] (II) No input driver specified, ignoring this device.
[  1823.617] (II) This device may have been added with another device file.
[  1823.617] (II) config/udev: Adding input device (unnamed) (/dev/ttyS6)
[  1823.618] (II) No input driver specified, ignoring this device.
[  1823.618] (II) This device may have been added with another device file.
[  1823.618] (II) config/udev: Adding input device (unnamed) (/dev/ttyS7)
[  1823.618] (II) No input driver specified, ignoring this device.
[  1823.618] (II) This device may have been added with another device file.
[  1823.618] (II) config/udev: Adding input device (unnamed) (/dev/ttyS8)
[  1823.618] (II) No input driver specified, ignoring this device.
[  1823.618] (II) This device may have been added with another device file.
[  1823.618] (II) config/udev: Adding input device (unnamed) (/dev/ttyS9)
[  1823.618] (II) No input driver specified, ignoring this device.
[  1823.618] (II) This device may have been added with another device file.
[  1823.618] (II) config/udev: Adding input device (unnamed) (/dev/input/mice)
[  1823.618] (II) No input driver specified, ignoring this device.
[  1823.618] (II) This device may have been added with another device file.
[  1823.618] (II) config/udev: Adding input device (unnamed) (/dev/console)
[  1823.618] (II) No input driver specified, ignoring this device.
[  1823.618] (II) This device may have been added with another device file.
[  1823.619] (II) config/udev: Adding input device (unnamed) (/dev/ptmx)
[  1823.619] (II) No input driver specified, ignoring this device.
[  1823.619] (II) This device may have been added with another device file.
[  1823.619] (II) config/udev: Adding input device (unnamed) (/dev/tty)
[  1823.619] (II) No input driver specified, ignoring this device.
[  1823.619] (II) This device may have been added with another device file.
[  1823.619] (II) config/udev: Adding input device (unnamed) (/dev/tty0)
[  1823.619] (II) No input driver specified, ignoring this device.
[  1823.619] (II) This device may have been added with another device file.
[  1823.619] (II) config/udev: Adding input device (unnamed) (/dev/tty1)
[  1823.619] (II) No input driver specified, ignoring this device.
[  1823.619] (II) This device may have been added with another device file.
[  1823.619] (II) config/udev: Adding input device (unnamed) (/dev/tty10)
[  1823.619] (II) No input driver specified, ignoring this device.
[  1823.619] (II) This device may have been added with another device file.
[  1823.619] (II) config/udev: Adding input device (unnamed) (/dev/tty11)
[  1823.619] (II) No input driver specified, ignoring this device.
[  1823.619] (II) This device may have been added with another device file.
[  1823.619] (II) config/udev: Adding input device (unnamed) (/dev/tty12)
[  1823.619] (II) No input driver specified, ignoring this device.
[  1823.619] (II) This device may have been added with another device file.
[  1823.620] (II) config/udev: Adding input device (unnamed) (/dev/tty13)
[  1823.620] (II) No input driver specified, ignoring this device.
[  1823.620] (II) This device may have been added with another device file.
[  1823.620] (II) config/udev: Adding input device (unnamed) (/dev/tty14)
[  1823.620] (II) No input driver specified, ignoring this device.
[  1823.620] (II) This device may have been added with another device file.
[  1823.620] (II) config/udev: Adding input device (unnamed) (/dev/tty15)
[  1823.620] (II) No input driver specified, ignoring this device.
[  1823.620] (II) This device may have been added with another device file.
[  1823.620] (II) config/udev: Adding input device (unnamed) (/dev/tty16)
[  1823.620] (II) No input driver specified, ignoring this device.
[  1823.620] (II) This device may have been added with another device file.
[  1823.620] (II) config/udev: Adding input device (unnamed) (/dev/tty17)
[  1823.620] (II) No input driver specified, ignoring this device.
[  1823.620] (II) This device may have been added with another device file.
[  1823.620] (II) config/udev: Adding input device (unnamed) (/dev/tty18)
[  1823.620] (II) No input driver specified, ignoring this device.
[  1823.620] (II) This device may have been added with another device file.
[  1823.621] (II) config/udev: Adding input device (unnamed) (/dev/tty19)
[  1823.621] (II) No input driver specified, ignoring this device.
[  1823.621] (II) This device may have been added with another device file.
[  1823.621] (II) config/udev: Adding input device (unnamed) (/dev/tty2)
[  1823.621] (II) No input driver specified, ignoring this device.
[  1823.621] (II) This device may have been added with another device file.
[  1823.621] (II) config/udev: Adding input device (unnamed) (/dev/tty20)
[  1823.621] (II) No input driver specified, ignoring this device.
[  1823.621] (II) This device may have been added with another device file.
[  1823.621] (II) config/udev: Adding input device (unnamed) (/dev/tty21)
[  1823.621] (II) No input driver specified, ignoring this device.
[  1823.621] (II) This device may have been added with another device file.
[  1823.621] (II) config/udev: Adding input device (unnamed) (/dev/tty22)
[  1823.621] (II) No input driver specified, ignoring this device.
[  1823.621] (II) This device may have been added with another device file.
[  1823.621] (II) config/udev: Adding input device (unnamed) (/dev/tty23)
[  1823.621] (II) No input driver specified, ignoring this device.
[  1823.621] (II) This device may have been added with another device file.
[  1823.621] (II) config/udev: Adding input device (unnamed) (/dev/tty24)
[  1823.621] (II) No input driver specified, ignoring this device.
[  1823.621] (II) This device may have been added with another device file.
[  1823.622] (II) config/udev: Adding input device (unnamed) (/dev/tty25)
[  1823.622] (II) No input driver specified, ignoring this device.
[  1823.622] (II) This device may have been added with another device file.
[  1823.622] (II) config/udev: Adding input device (unnamed) (/dev/tty26)
[  1823.622] (II) No input driver specified, ignoring this device.
[  1823.622] (II) This device may have been added with another device file.
[  1823.622] (II) config/udev: Adding input device (unnamed) (/dev/tty27)
[  1823.622] (II) No input driver specified, ignoring this device.
[  1823.622] (II) This device may have been added with another device file.
[  1823.622] (II) config/udev: Adding input device (unnamed) (/dev/tty28)
[  1823.622] (II) No input driver specified, ignoring this device.
[  1823.622] (II) This device may have been added with another device file.
[  1823.622] (II) config/udev: Adding input device (unnamed) (/dev/tty29)
[  1823.622] (II) No input driver specified, ignoring this device.
[  1823.622] (II) This device may have been added with another device file.
[  1823.622] (II) config/udev: Adding input device (unnamed) (/dev/tty3)
[  1823.622] (II) No input driver specified, ignoring this device.
[  1823.622] (II) This device may have been added with another device file.
[  1823.622] (II) config/udev: Adding input device (unnamed) (/dev/tty30)
[  1823.622] (II) No input driver specified, ignoring this device.
[  1823.622] (II) This device may have been added with another device file.
[  1823.623] (II) config/udev: Adding input device (unnamed) (/dev/tty31)
[  1823.623] (II) No input driver specified, ignoring this device.
[  1823.623] (II) This device may have been added with another device file.
[  1823.623] (II) config/udev: Adding input device (unnamed) (/dev/tty32)
[  1823.623] (II) No input driver specified, ignoring this device.
[  1823.623] (II) This device may have been added with another device file.
[  1823.623] (II) config/udev: Adding input device (unnamed) (/dev/tty33)
[  1823.623] (II) No input driver specified, ignoring this device.
[  1823.623] (II) This device may have been added with another device file.
[  1823.623] (II) config/udev: Adding input device (unnamed) (/dev/tty34)
[  1823.623] (II) No input driver specified, ignoring this device.
[  1823.623] (II) This device may have been added with another device file.
[  1823.623] (II) config/udev: Adding input device (unnamed) (/dev/tty35)
[  1823.623] (II) No input driver specified, ignoring this device.
[  1823.623] (II) This device may have been added with another device file.
[  1823.623] (II) config/udev: Adding input device (unnamed) (/dev/tty36)
[  1823.623] (II) No input driver specified, ignoring this device.
[  1823.623] (II) This device may have been added with another device file.
[  1823.623] (II) config/udev: Adding input device (unnamed) (/dev/tty37)
[  1823.623] (II) No input driver specified, ignoring this device.
[  1823.623] (II) This device may have been added with another device file.
[  1823.623] (II) config/udev: Adding input device (unnamed) (/dev/tty38)
[  1823.624] (II) No input driver specified, ignoring this device.
[  1823.624] (II) This device may have been added with another device file.
[  1823.624] (II) config/udev: Adding input device (unnamed) (/dev/tty39)
[  1823.624] (II) No input driver specified, ignoring this device.
[  1823.624] (II) This device may have been added with another device file.
[  1823.624] (II) config/udev: Adding input device (unnamed) (/dev/tty4)
[  1823.624] (II) No input driver specified, ignoring this device.
[  1823.624] (II) This device may have been added with another device file.
[  1823.624] (II) config/udev: Adding input device (unnamed) (/dev/tty40)
[  1823.624] (II) No input driver specified, ignoring this device.
[  1823.624] (II) This device may have been added with another device file.
[  1823.624] (II) config/udev: Adding input device (unnamed) (/dev/tty41)
[  1823.624] (II) No input driver specified, ignoring this device.
[  1823.624] (II) This device may have been added with another device file.
[  1823.624] (II) config/udev: Adding input device (unnamed) (/dev/tty42)
[  1823.624] (II) No input driver specified, ignoring this device.
[  1823.624] (II) This device may have been added with another device file.
[  1823.624] (II) config/udev: Adding input device (unnamed) (/dev/tty43)
[  1823.624] (II) No input driver specified, ignoring this device.
[  1823.624] (II) This device may have been added with another device file.
[  1823.625] (II) config/udev: Adding input device (unnamed) (/dev/tty44)
[  1823.625] (II) No input driver specified, ignoring this device.
[  1823.625] (II) This device may have been added with another device file.
[  1823.625] (II) config/udev: Adding input device (unnamed) (/dev/tty45)
[  1823.625] (II) No input driver specified, ignoring this device.
[  1823.625] (II) This device may have been added with another device file.
[  1823.625] (II) config/udev: Adding input device (unnamed) (/dev/tty46)
[  1823.625] (II) No input driver specified, ignoring this device.
[  1823.625] (II) This device may have been added with another device file.
[  1823.625] (II) config/udev: Adding input device (unnamed) (/dev/tty47)
[  1823.625] (II) No input driver specified, ignoring this device.
[  1823.625] (II) This device may have been added with another device file.
[  1823.625] (II) config/udev: Adding input device (unnamed) (/dev/tty48)
[  1823.625] (II) No input driver specified, ignoring this device.
[  1823.625] (II) This device may have been added with another device file.
[  1823.625] (II) config/udev: Adding input device (unnamed) (/dev/tty49)
[  1823.625] (II) No input driver specified, ignoring this device.
[  1823.625] (II) This device may have been added with another device file.
[  1823.625] (II) config/udev: Adding input device (unnamed) (/dev/tty5)
[  1823.625] (II) No input driver specified, ignoring this device.
[  1823.625] (II) This device may have been added with another device file.
[  1823.626] (II) config/udev: Adding input device (unnamed) (/dev/tty50)
[  1823.626] (II) No input driver specified, ignoring this device.
[  1823.626] (II) This device may have been added with another device file.
[  1823.626] (II) config/udev: Adding input device (unnamed) (/dev/tty51)
[  1823.626] (II) No input driver specified, ignoring this device.
[  1823.626] (II) This device may have been added with another device file.
[  1823.626] (II) config/udev: Adding input device (unnamed) (/dev/tty52)
[  1823.626] (II) No input driver specified, ignoring this device.
[  1823.626] (II) This device may have been added with another device file.
[  1823.626] (II) config/udev: Adding input device (unnamed) (/dev/tty53)
[  1823.626] (II) No input driver specified, ignoring this device.
[  1823.626] (II) This device may have been added with another device file.
[  1823.626] (II) config/udev: Adding input device (unnamed) (/dev/tty54)
[  1823.626] (II) No input driver specified, ignoring this device.
[  1823.626] (II) This device may have been added with another device file.
[  1823.626] (II) config/udev: Adding input device (unnamed) (/dev/tty55)
[  1823.626] (II) No input driver specified, ignoring this device.
[  1823.626] (II) This device may have been added with another device file.
[  1823.626] (II) config/udev: Adding input device (unnamed) (/dev/tty56)
[  1823.626] (II) No input driver specified, ignoring this device.
[  1823.626] (II) This device may have been added with another device file.
[  1823.627] (II) config/udev: Adding input device (unnamed) (/dev/tty57)
[  1823.627] (II) No input driver specified, ignoring this device.
[  1823.627] (II) This device may have been added with another device file.
[  1823.627] (II) config/udev: Adding input device (unnamed) (/dev/tty58)
[  1823.627] (II) No input driver specified, ignoring this device.
[  1823.627] (II) This device may have been added with another device file.
[  1823.627] (II) config/udev: Adding input device (unnamed) (/dev/tty59)
[  1823.627] (II) No input driver specified, ignoring this device.
[  1823.627] (II) This device may have been added with another device file.
[  1823.627] (II) config/udev: Adding input device (unnamed) (/dev/tty6)
[  1823.627] (II) No input driver specified, ignoring this device.
[  1823.627] (II) This device may have been added with another device file.
[  1823.627] (II) config/udev: Adding input device (unnamed) (/dev/tty60)
[  1823.627] (II) No input driver specified, ignoring this device.
[  1823.627] (II) This device may have been added with another device file.
[  1823.627] (II) config/udev: Adding input device (unnamed) (/dev/tty61)
[  1823.627] (II) No input driver specified, ignoring this device.
[  1823.627] (II) This device may have been added with another device file.
[  1823.627] (II) config/udev: Adding input device (unnamed) (/dev/tty62)
[  1823.627] (II) No input driver specified, ignoring this device.
[  1823.627] (II) This device may have been added with another device file.
[  1823.628] (II) config/udev: Adding input device (unnamed) (/dev/tty63)
[  1823.628] (II) No input driver specified, ignoring this device.
[  1823.628] (II) This device may have been added with another device file.
[  1823.628] (II) config/udev: Adding input device (unnamed) (/dev/tty7)
[  1823.628] (II) No input driver specified, ignoring this device.
[  1823.628] (II) This device may have been added with another device file.
[  1823.628] (II) config/udev: Adding input device (unnamed) (/dev/tty8)
[  1823.628] (II) No input driver specified, ignoring this device.
[  1823.628] (II) This device may have been added with another device file.
[  1823.628] (II) config/udev: Adding input device (unnamed) (/dev/tty9)
[  1823.628] (II) No input driver specified, ignoring this device.
[  1823.628] (II) This device may have been added with another device file.
[  1825.376] (II) intel(0): EDID vendor "SEC", prod id 21569
[  1825.377] (II) intel(0): Printing DDC gathered Modelines:
[  1825.377] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1414 1446 1462  768 773 778 790 +hsync -vsync (47.4 kHz eP)
[  1825.377] (II) intel(0): Modeline "1366x768"x0.0   48.22  1366 1414 1446 1526  768 773 778 790 +hsync -vsync (31.6 kHz e)
[  1842.642] Using O_TMPFILE
[  1852.745] Using O_TMPFILE
[  1852.965] Using O_TMPFILE
[  1855.844] Using O_TMPFILE
[  1869.901] Using O_TMPFILE
[  1875.810] Using O_TMPFILE
[  1965.086] Using O_TMPFILE
[  1967.772] Using O_TMPFILE
[  2040.029] (II) config/udev: Adding input device GiGa HiD (/dev/input/event10)
[  2040.029] (**) GiGa HiD: Applying InputClass "evdev keyboard catchall"
[  2040.029] (**) GiGa HiD: Applying InputClass "system-keyboard"
[  2040.029] (**) GiGa HiD: Applying InputClass "evdev keyboard catchall"
[  2040.029] (**) GiGa HiD: Applying InputClass "libinput keyboard catchall"
[  2040.029] (II) Using input driver 'libinput' for 'GiGa HiD'
[  2040.030] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 74 paused 0
[  2040.030] (**) GiGa HiD: always reports core events
[  2040.030] (**) Option "Device" "/dev/input/event10"
[  2040.030] (**) Option "_source" "server/udev"
[  2040.031] (II) event10 - GiGa HiD: is tagged by udev as: Keyboard
[  2040.031] (II) event10 - GiGa HiD: device is a keyboard
[  2040.031] (II) event10 - GiGa HiD: device removed
[  2040.031] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:040B:0002.0002/input/input18/event10"
[  2040.031] (II) XINPUT: Adding extended input device "GiGa HiD" (type: KEYBOARD, id 12)
[  2040.031] (**) Option "xkb_model" "microsoftpro"
[  2040.031] (**) Option "xkb_layout" "us,ru"
[  2040.031] (**) Option "xkb_variant" ",winkeys"
[  2040.031] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[  2040.034] (II) event10 - GiGa HiD: is tagged by udev as: Keyboard
[  2040.034] (II) event10 - GiGa HiD: device is a keyboard
[  2040.182] (II) config/udev: Adding input device GiGa HiD (/dev/input/mouse1)
[  2040.183] (**) GiGa HiD: Applying InputClass "system-keyboard"
[  2040.183] (II) No input driver specified, ignoring this device.
[  2040.183] (II) This device may have been added with another device file.
[  2040.235] (II) config/udev: Adding input device GiGa HiD (/dev/input/event11)
[  2040.235] (**) GiGa HiD: Applying InputClass "evdev pointer catchall"
[  2040.235] (**) GiGa HiD: Applying InputClass "evdev keyboard catchall"
[  2040.235] (**) GiGa HiD: Applying InputClass "system-keyboard"
[  2040.235] (**) GiGa HiD: Applying InputClass "evdev pointer catchall"
[  2040.235] (**) GiGa HiD: Applying InputClass "evdev keyboard catchall"
[  2040.235] (**) GiGa HiD: Applying InputClass "libinput pointer catchall"
[  2040.235] (**) GiGa HiD: Applying InputClass "libinput keyboard catchall"
[  2040.235] (II) Using input driver 'libinput' for 'GiGa HiD'
[  2040.237] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 75 paused 0
[  2040.237] (**) GiGa HiD: always reports core events
[  2040.237] (**) Option "Device" "/dev/input/event11"
[  2040.237] (**) Option "_source" "server/udev"
[  2040.238] (II) event11 - GiGa HiD: is tagged by udev as: Keyboard Mouse
[  2040.238] (II) event11 - GiGa HiD: device is a pointer
[  2040.238] (II) event11 - GiGa HiD: device is a keyboard
[  2040.238] (II) event11 - GiGa HiD: device removed
[  2040.238] (II) libinput: GiGa HiD: needs a virtual subdevice
[  2040.238] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:040B:0002.0003/input/input19/event11"
[  2040.238] (II) XINPUT: Adding extended input device "GiGa HiD" (type: MOUSE, id 13)
[  2040.244] (**) Option "AccelerationScheme" "none"
[  2040.246] (**) GiGa HiD: (accel) selected scheme none/0
[  2040.246] (**) GiGa HiD: (accel) acceleration factor: 2.000
[  2040.246] (**) GiGa HiD: (accel) acceleration threshold: 4
[  2040.247] (II) event11 - GiGa HiD: is tagged by udev as: Keyboard Mouse
[  2040.247] (II) event11 - GiGa HiD: device is a pointer
[  2040.247] (II) event11 - GiGa HiD: device is a keyboard
[  2040.249] (**) GiGa HiD: Applying InputClass "evdev pointer catchall"
[  2040.249] (**) GiGa HiD: Applying InputClass "evdev keyboard catchall"
[  2040.249] (**) GiGa HiD: Applying InputClass "system-keyboard"
[  2040.249] (**) GiGa HiD: Applying InputClass "evdev pointer catchall"
[  2040.249] (**) GiGa HiD: Applying InputClass "evdev keyboard catchall"
[  2040.249] (**) GiGa HiD: Applying InputClass "libinput pointer catchall"
[  2040.249] (**) GiGa HiD: Applying InputClass "libinput keyboard catchall"
[  2040.249] (II) Using input driver 'libinput' for 'GiGa HiD'
[  2040.249] (II) systemd-logind: returning pre-existing fd for /dev/input/event11 13:75
[  2040.249] (**) GiGa HiD: always reports core events
[  2040.249] (**) Option "Device" "/dev/input/event11"
[  2040.249] (**) Option "_source" "_driver/libinput"
[  2040.249] (II) libinput: GiGa HiD: is a virtual subdevice
[  2040.249] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:040B:0002.0003/input/input19/event11"
[  2040.249] (II) XINPUT: Adding extended input device "GiGa HiD" (type: KEYBOARD, id 14)
[  2040.249] (**) Option "xkb_model" "microsoftpro"
[  2040.249] (**) Option "xkb_layout" "us,ru"
[  2040.249] (**) Option "xkb_variant" ",winkeys"
[  2040.249] (**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
[  2659.204] Using O_TMPFILE
[  2665.802] Using O_TMPFILE
[  3138.825] Using O_TMPFILE
[  3138.896] Using O_TMPFILE
[  3155.760] Using O_TMPFILE
[  3156.996] Using O_TMPFILE

Система Opensuse Tumbleweed Это произошло после того как я подключил доп.репозиторий packman, не офф.репозитарий, там тоже были пакеты Cinnamon, я запустил обновление всех пакетов командой zypper up а потом обновление системы командой zypper dup и при обновлении пакетов и системы система сообщала что на packman'е есть более новые пакеты cinnamon, я выбрал - да, т.е. установить более новые, после этого после перезагрузки Cinnamon не грузится. Вообщем вопросы: 1.почему у меня не запускается хотя бы экран входа в систему где можно хотя бы выбрать граф.окружение? Автологин не включен 2.Как восстановить Cinnamon? И какие вообще общие способы решения всех подобных проблем когда графика не запускается? А то это у меня уже не первый случай когда на разных линуксах падает графика а я до сих пор в этом толком не разобрался - как диагностировать эту проблему? Почему упало? Как вообще устроена графика в линуксе - где об этом конкретно и подробно почитать? а то до сих пор в устройстве графики в линухах я ни бум бум почему она падает и что делать остается только гадать

Осиль Lorcode. Или закинь выхлоп на Pastebin. Невозможно ничего прочесть

Sunderland93 ★★★★★ ()

я подключил доп.репозиторий packman, не офф.репозитарий

А то это у меня уже не первый случай когда на разных линуксах падает графика

Нехрен обновляться из неофициальных репов. Особенно на роллинг-дистрибутивах

Sunderland93 ★★★★★ ()

Если ты пишешь, что по startx у тебя запускается KDE, то графика у тебя не упала, а как раз таки работает.

Графика в Linux настроена очень просто, запускается xorg-server или wayland, далее в запущенной x сессии запускается некоторое графическое приложение.

Так вот 'exec cinnamon-session' нужно выполнять не в консоли, а как раз такие в X сессии.

В общем случае, если у тебя не запускается ни какой менеджер рабочих столов, KDM, GDM, SLIM, просто XDM или что-то другое, то при запуске startx в консоли конфигурацию того, что должно быть запущено в X-сессии, при запуске startx, считывается из файлв ~/.xinitrc, этот файл находится в корне домашней директории того пользователя, от имени которого ты выполнил startx.

Поэтому, если ты хочешь запускать нужную тебе графическую оболочку по startx, то пропиши соответствующие строки в ~/.xinitrc, а если ты хочешь выбирать нужную тебе графическую облочку через DM, KDM, SDM, GDM, SLIM, XDM или что-то другое, то добавь его запуска на уровень запуска и запусти.

Как настроить запуска DM читай в документации по твоему дистрибутиву.

Если не можешь разобраться, то настраивай через ~/.xinitrc, только посмотри в Internet что там должно быть указано для Cinnamon.

Ну и если ты не разбираешься в Linux, то зачем ты подключаешь сторонни репозитории и обновляешь систему?

Это называется ССЗБ (Сам себе заработал баг).

UPD:
В /var/log/Xorg.0.log у тебя всё в порядке, проблем нет.

kostik87 ★★★★★ ()
Последнее исправление: kostik87 (всего исправлений: 1)
Ответ на: комментарий от Sunderland93

Просто opensuse несколько беднее чем Ubuntu/Debian на софт,а в пакмане есть еще софт люди им пользуются и нормально все

barmaley99 ()
Ответ на: комментарий от kostik87

«Ну и если ты не разбираешься в Linux, то зачем ты подключаешь сторонни репозитории и обновляешь систему?» - чтобы получить больше софта да и таким образом вот линукс и изучаю - случаются проблемы занимаюсь их решением заодно и опыт получил, комп домашний ничего страшного, линукс не винда его почти всегда можно восстановить

barmaley99 ()
Ответ на: комментарий от kostik87

«при запуске startx в консоли конфигурацию того, что должно быть запущено в X-сессии, при запуске startx, считывается из файлв ~/.xinitrc» у меня этот файл называется .xinitrc.template, другого нет, это нормально?

barmaley99 ()
Ответ на: комментарий от kostik87

.xinitrc.template

#!/bin/bash
#
# Sample .xinitrc for SuSE Linux
# This script is called from 'startx' when you start an X session
#

#
# In case everything goes wrong, we at least fall back to a plain xterm
#
failsafe="xterm -ls -T Failsafe -geometry 80x24-0-0"
trap "exec $failsafe" EXIT SIGHUP SIGINT SIGPIPE SIGTERM SIGIO

#
# Some bash (1 and 2) settings to avoid trouble on a
# failed program call.
#
set +e > /dev/null 2>&1
set +u > /dev/null 2>&1
set +o posix  > /dev/null 2>&1
if type shopt > /dev/null 2>&1 ; then
    shopt -s execfail
else
    no_exit_on_failed_exec=1
fi

#
# Source common code shared between the
# X session and X init scripts
#
. /etc/X11/xinit/xinitrc.common

#
# Special for twm
#
case "$WINDOWMANAGER" in
    *twm) xsetroot -solid darkslateblue
esac

#
# Uncomment next lines to activate asking for ssh passphrase
#
# if test -S "$SSH_AUTH_SOCK" -a -x "$SSH_ASKPASS"; then
#       ssh-add < /dev/null
# fi

#
# Add your own lines here...
#


# day planer deamon
# pland &

# 
# finally start the window manager
#
unset WINDOW_MANAGER STARTUP
exec $WINDOWMANAGER ${1+"$@"}

# call failsafe
exit 0

barmaley99 ()
Ответ на: комментарий от kostik87

xinitrc.common

# /etc/X11/xinit/xinitrc.common
#
# Common code used in X session and X init scripts.
# File shall be sourced but not executed by the scripts.
#

#
# Source this file only once
#
test "$XSESSION_IS_UP" != "yes" || return
XSESSION_IS_UP=yes
export XSESSION_IS_UP

#
# Some common user and system files,
#
    XETCDIR=/etc/X11
  xdefaults=$HOME/.Xdefaults
 xresources=$HOME/.Xresources
    xmodmap=$HOME/.Xmodmap
     xkbmap=$HOME/.Xkbmap

#
# This should be the default
#
TERM=xterm
export TERM

#
# Check for X11R6 in execution path
#
case ":${PATH}:" in
    *:/usr/X11R6/bin:*) ;;
    *)	PATH="${PATH}:/usr/X11R6/bin"
esac

#
# Run user xinit scripts.
#
for script in /etc/X11/xinit/xinitrc.d/*; do
    test -e $script || continue
    test -d $script && continue
    case "$script" in
	.*)		continue ;;
	*.rpm*)		continue ;;
	*.swap)		continue ;;
	*.bak)		continue ;;
	*.orig)		continue ;;
	\#*)		continue ;;
	*~)		continue ;;
    esac
    if test -x $script ; then
	if grep -qE "^# to be sourced" $script >/dev/null 2>&1; then
	    . $script
	else
	    # run number ordered scripts sequentially
	    case ${script##*/} in
	    	 [0-9][0-9]-*)  $script ;;
		 *) $script & ;;
	    esac
	fi
    else
	. $script
    fi
done
unset script

#
# Choose a window manager if not set by /etc/profile.d/profile.sh
#
if test -z "$WINDOWMANAGER" ; then
	# For some reason, $WINDOWMANAGER is not set.
	# This is because the user cleared it or DEFAULT_WM is empty.
	# Fall back on any session we can find.
	_find_wm()
	{
		local file
		local dir="/usr/share/xsessions"

		# Pick a session description file.
		for file in ${dir}/{plasma*,kde*,gnome*,xfce*,lxde*,icewm*,*}.desktop
		do
			case "${file##*/}" in
				# Ignore user's .xsession as we can't
				# handle it as a fallback.
				xsession.*)
					continue ;;
			esac
			test -e "$file" && break
		done
		test -z "$file" && return

		# Grab the session command line from the file.
		local line
		while read -r line
		do
			case ${line} in
				Exec=*)
					WINDOWMANAGER="${line#Exec=}"
					break
					;;
			esac
		done < "$file"
	}
	_find_wm
	unset _find_wm
fi

#
# Error, no Window Manager found.  Normally the exit
# raise the fallback trap of the sourcing script.
#
if test -z "$WINDOWMANAGER" ; then
    if test -t 1 ; then
	echo "Error: Unable to find a window manager. Please make sure you installed one!"
	echo "       This could be due to a misconfigured WINDOWMANAGER in your shell,"
	echo "       an unknown DEFAULT_WM in /etc/sysconfig/windowmanager, or because"
	echo "       the programs referenced in /usr/share/xsessions/*.desktop are"
	echo "       not in the PATH."
	echo "Exiting..."
    fi
    xmessage -timeout 20 -default okay -center -file - <<-EOF
	Error: Unable to find a window manager. Please make sure you installed one!
	       This could be due to a misconfigured WINDOWMANAGER in your shell,
	       an unknown DEFAULT_WM in /etc/sysconfig/windowmanager, or because
	       the session program referenced in /usr/share/xsessions/*.desktop is
	       not in the PATH.
	Exiting...
	EOF
    exit 1
fi

#
# Foreign X session scripts may use an other variable name
#
WINDOW_MANAGER=$WINDOWMANAGER
STARTUP=$WINDOWMANAGER
export WINDOWMANAGER WINDOW_MANAGER STARTUP

#
# Start the XIM server
#
XIMFILE=/etc/X11/xim
test -r $HOME/.xim && XIMFILE=$HOME/.xim
test -r $XIMFILE   && source $XIMFILE

#
# Enable Numlock if set
#
if test -r /var/run/numlock-on && type -p numlockx > /dev/null ; then
    numlockx
fi

#
# Load nvidia settings
#
if test -r $HOME/.nvidia-settings-rc && type -p nvidia-settings > /dev/null ; then
    nvidia-settings --load-config-only > /dev/null 2>&1 &
fi

#
# Handle system's and/or user's Xkbmap (x)or user's Xmodmap.
# Note that xkb and xmodmap should not be mixed.
# Priority: 1. User's xkb -> 2. User's xmodmap -> 3. System's xkb
#
if test -s "$xkbmap" ; then
    # apply system's xkb first
    if test -s $XETCDIR/Xkbmap; then
        test -r $XETCDIR/Xkbmap && cat $XETCDIR/Xkbmap | xkbcomp - $DISPLAY
    fi
    test -r "$xkbmap"  && cat "$xkbmap" | xkbcomp - $DISPLAY
elif test -s "$xmodmap"; then
    test -r "$xmodmap" && xmodmap "$xmodmap"
elif test -s $XETCDIR/Xkbmap ; then
    test -r $XETCDIR/Xkbmap && cat $XETCDIR/Xkbmap | xkbcomp - $DISPLAY
fi

#
# Handle the system and the users Xresources
#
if test -r "$xdefaults"  ; then
    if test -r $XETCDIR/Xresources ; then
	xrdb -nocpp -load   -retain $XETCDIR/Xresources
	xrdb -I$HOME -merge "$xdefaults"
    else
	xrdb -I$HOME -load -retain "$xdefaults"
    fi
    if test -r "$xresources" ; then
	xrdb -I$HOME -merge "$xresources"
    fi
elif test -r "$xresources" ; then
    if test -r $XETCDIR/Xresources ; then
	xrdb -nocpp -load  -retain $XETCDIR/Xresources
	xrdb -I$HOME -merge "$xresources"
    else
	xrdb -I$HOME -load -retain "$xresources"
    fi
elif test -r $XETCDIR/Xresources ; then
    xrdb -nocpp -load -retain $XETCDIR/Xresources
fi

#
# Disable new Xcursor themes if none is specified resp. located
# in $HOME (use "unset XCURSOR_CORE" to enable them again later)
#
#if test -z "$XCURSOR_THEME" -a ! -d $HOME/.icons ; then
#    XCURSOR_CORE=true
#    export XCURSOR_CORE
#else
#    unset XCURSOR_CORE
#fi

barmaley99 ()
Ответ на: комментарий от barmaley99

.xinitrc.template - это пример, болванка, которую ты можешь взять за основу, скопировав или переименовав его в .xinitrc.

А можешь создать .xinitrc сам.

kostik87 ★★★★★ ()
Ответ на: комментарий от barmaley99

Я не будут разбираться в том, что написано в .xinitrc.common, всё что я хотел сказать о том как работает графическая оболочка в Linux я тебе уже сказал в первом моём сообщении.

Разбирайся сам что и как вписать в ~/.xinitrc либо как сделать что бы запукался графический менеджер входа с возможностью ввода логина и пароля и выбора графической оболочки.

Могу лишь подсказать что примерно должно быть в ~/.xinitrc, вот wiki Arch Linux по настройке Cinnamon: https://wiki.archlinux.org/index.php/Cinnamon.

Там есть раздел «Starting Cinnamon manually», в котором написано что должно быть в ~/.xinitrc для запуска по startx оболочки Cinnamon.

Дальше разбирайся сам, направления тебе указаны.

kostik87 ★★★★★ ()

Это произошло после того как я подключил доп.репозиторий packman, не офф.репозитарий, там тоже были пакеты Cinnamon

странно, я в репозиториях packman пакетов с Cinnamon не вижу. покажите вывод zypper lr -u.

1.почему у меня не запускается хотя бы экран входа в систему где можно хотя бы выбрать граф.окружение?

вывод grep DISPLAYMANAGER= /etc/sysconfig/displaymanager DISPLAYMANAGER="gdm"?

2.Как восстановить Cinnamon?

удалить добавленные репозитории и снова zypper dup. это если нет снапшотов btrfs, на которые можно откатиться (по умолчанию TW предлагает устанавливаться как раз на btrfs)

как диагностировать эту проблему?

читать логи, см. journalctl -b

littlechris ★★★ ()

Виноват. Исправление уже в пути, и уже доступно в X11:Cinnamon:Current.
И при том, исправление на JavaScript пришлось делать. Ради вас старался %).

Darth_Revan ★★★★★ ()
Ответ на: комментарий от littlechris

Что странно что Opensuse до Tumbleweed последней версии я обновил недавно, до этого Opensuse у меня была Leap версии 42.1 и был подключен также пакман и никаких проблем не было, недавно запустил обновление системы до Тумбльвида а при обновлении удаляются все прежние репы и подключаются самые последние и только оффициальные, обновилось без проблем а как подключил по новой пакмана вот такая вот проблема.

zypper lr -u - вывелись все подключенные у меня репы а именно - официальные - Packman - Репозитарий Cinnamon который я подключал дополнительно http://download.opensuse.org/repositories/X11:/Cinnamon:/Current/openSUSE_Tum...

Пакман подключал отсюда https://ru.opensuse.org/Дополнительные_репозитории Вот этот http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Tumbleweed/packman.repo И я точно помню как при выполнении zypper up часть более новых пакетов синнамона нашлись на пакмане и зиппер спросил - обновить их оттуда или оставить прежние? я обновил

1. вывод grep DISPLAYMANAGER= /etc/sysconfig/displaymanager DISPLAYMANAGER=«sddm»! Если попробовать запустить sddm вручную sudo sddm start то черный экран и подвижный курсор мыши и все, еще в системе есть и еще менеджеры - gdm, kdm, xdm, lightdm Из них всех запустился только lightdm командой sudo lightdm start - он дает выбрать оболочку но в нем запускаются все оболочки кроме Cinnamon и KDE, т.к. у меня еще есть Gnome ICEWM и еще много прочих Почитал документацию к Opensuse о случаях краха графики - попробовал оттуда первое - зайти в yast, благо зайти в него можно и из консоли, зашел в services и там есть переключение режима загрузки системы - необходимо было переключить ее в Graphical mode, что странно что этот режим у меня стоял Emergency mode еще когда с системой все нормально было и все нормально грузилось и я не придавал этому режиму значения, так вот переключил и загрузка в графику пошла, но через gdm и в gnome, попробовал переключиться там же в yast'е в пункте alternatives, там есть возможность выбрать нужный display manager и граф.оболочку для запуска, на sddm - по прежнему sddm дает черный экран с мышкой, переустановил sddm - результат тот же, переустановил cinnamon (при еще неотключенном репе Пакмана) - загрузка Синнамона через gdm пошла! Но sddm по прежнему дает черный экран - вывод - проблемы с sddm а не с Синнимоном, вообщем пробую по вашему совету - удаляю пакман и zypper dup дальше попробую опять sddm переустановить

barmaley99 ()
Ответ на: комментарий от barmaley99

zypper lr -u - вывелись все подключенные у меня репы

вообще я ожидал копипасту а не пересказ

Репозитарий Cinnamon который я подключал дополнительно

Зачем? Чем вас не устраивал тот, что в официальном репозитории?

Вот этот http://ftp.gwdg.de/pub/linux/misc/packman/suse/openSUSE_Tumbleweed/packman.repo

отключите его и подключите для начала только Essentials. для проигрывания всякой h264 будет достаточно.

Если попробовать запустить sddm вручную sudo sddm start

ugh. с чего вы решили, что он запускается именно так? текущий DM в openSUSE запускается сервисом display-manager.service, который уже запускает тот DM, который указан в конфиге.

удаляю пакман

я бы для чистоты эксперимента и X11:Cinnamon тоже снёс. но раз работает из GDM, то на усмотрение.

littlechris ★★★ ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.