LINUX.ORG.RU

Xorg. Как запустить в ноутбуке с двумя видеокартами дисплей с монитором?

 , , ,


1

2

Здравствуйте.

Знаю что эта тема часто всплывает. Я чекнул весь гугл но решения так и не нашёл.

Ноутбук на debian 10 buster с двумя видеокартами на борту. Intel + NVIDIA

lspci

00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04)
01:00.0 3D controller: NVIDIA Corporation GP107M [GeForce GTX 1050 Mobile] (rev a1)

Драва nvidia установлены.

Дисплей естественно встроен и подключен к встроенной видеокарте к Intel. Монитор подключен через HDMI к интегрированной видеокарте NVIDIA.

Раньше ноутбук работал с дисплеем и монитором на Linux Mint 19.1 Tessa.

При попытке запустить дисплей и монитор, конфигурируя Xorg запустив драйвер от intel работает только дисплей.

Запуская драйвер от nvidia запускается только монитор.

Пробовал запустить на intel дисплей и монитор. Результата не дало. То же самое делал обратно. Тот же эффект.

xrandr

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 380mm x 210mm
..........
HDMI1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

xorg.conf.d/10-monitor.conf

Section "ServerLayout"
        Identifier "Main Layout"
        Screen     0 "Screen0"
        Screen     1 "Screen1"
EndSection

Section "Monitor"
	Identifier "eDP1"
EndSection

Section "Monitor"
	Identifier "HDMI1"
	Option "LeftOn" "eDP1"
EndSection

Section "Screen"
  Identifier "Screen0"
  Device "Intel"
  Monitor "eDP1"
EndSection

Section "Screen"
  Identifier "Screen1"
  Device "GTX 1050"
  Monitor "HDMI1"
EndSection

Section "Device"
  Identifier "GTX 1050"
  Driver "nvidia"
  Option "Monitor-HDMI-1" "HDMI1" 
EndSection

Section "Device"
  Identifier "Intel"
  Driver "intel"
  Option "Monitor-eDP-1" "eDP1"
EndSection

Xorg.0.log

[     6.073] 
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[     6.073] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[     6.073] Current Operating System: Linux debian 4.19.0-5-amd64 #1 SMP Debian 4.19.37-5+deb10u2 (2019-08-08) x86_64
[     6.073] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-5-amd64 root=UUID=7aff3854-67fe-4e31-8a0f-a4bf172019a0 ro quiet
[     6.073] Build Date: 05 March 2019  08:11:12PM
[     6.073] xorg-server 2:1.20.4-1 (https://www.debian.org/support) 
[     6.073] Current version of pixman: 0.36.0
[     6.073] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.073] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.073] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 10 16:24:27 2019
[     6.075] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     6.075] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.077] (==) ServerLayout "Main Layout"
[     6.077] (**) |-->Screen "Screen0" (0)
[     6.077] (**) |   |-->Monitor "eDP1"
[     6.077] (**) |   |-->Device "Intel"
[     6.077] (**) |-->Screen "Screen1" (1)
[     6.077] (**) |   |-->Monitor "HDMI1"
[     6.077] (**) |   |-->Device "GTX 1050"
[     6.077] (==) Automatically adding devices
[     6.077] (==) Automatically enabling devices
[     6.077] (==) Automatically adding GPU devices
[     6.077] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.083] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     6.083] 	Entry deleted from font path.
[     6.085] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[     6.085] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.085] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     6.085] (II) Loader magic: 0x555c0900ee20
[     6.085] (II) Module ABI versions:
[     6.085] 	X.Org ANSI C Emulation: 0.4
[     6.085] 	X.Org Video Driver: 24.0
[     6.085] 	X.Org XInput driver : 24.1
[     6.085] 	X.Org Server Extension : 10.0
[     6.085] (++) using VT number 7

[     6.085] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.086] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.098] (--) PCI:*(0@0:2:0) 8086:591b:103c:8219 rev 4, Mem @ 0xb2000000/16777216, 0xc0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[     6.098] (--) PCI: (1@0:0:0) 10de:1c8d:103c:8219 rev 161, Mem @ 0xb3000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[     6.098] (II) LoadModule: "glx"
[     6.102] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.141] (II) Module glx: vendor="X.Org Foundation"
[     6.141] 	compiled for 1.20.4, module version = 1.0.0
[     6.141] 	ABI class: X.Org Server Extension, version 10.0
[     6.141] (II) LoadModule: "intel"
[     6.141] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     6.145] (II) Module intel: vendor="X.Org Foundation"
[     6.145] 	compiled for 1.20.1, module version = 2.99.917
[     6.145] 	Module class: X.Org Video Driver
[     6.145] 	ABI class: X.Org Video Driver, version 24.0
[     6.145] (II) LoadModule: "nvidia"
[     6.145] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     6.151] (II) Module nvidia: vendor="NVIDIA Corporation"
[     6.151] 	compiled for 4.0.2, module version = 1.0.0
[     6.151] 	Module class: X.Org Video Driver
[     6.151] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     6.151] (II) intel: Driver for Intel(R) HD Graphics
[     6.151] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     6.151] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     6.152] (II) NVIDIA dlloader X Driver  418.74  Wed May  1 11:26:02 CDT 2019
[     6.152] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     6.166] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180719
[     6.166] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20180925-2 (Andreas Boll <aboll@debian.org>)
[     6.166] (II) intel(0): SNA compiled for use with valgrind
[     6.167] (--) intel(0): gen9 engineering sample
[     6.167] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[     6.167] (II) intel(0): Creating default Display subsection in Screen section
	"Screen0" for depth/fbbpp 24/32
[     6.167] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     6.167] (==) intel(0): RGB weight 888
[     6.167] (==) intel(0): Default visual is TrueColor
[     6.168] (II) intel(0): Output eDP1 using monitor section eDP1
[     6.168] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     6.168] (II) intel(0): Enabled output eDP1
[     6.168] (II) intel(0): Output HDMI1 using monitor section HDMI1
[     6.168] (II) intel(0): Enabled output HDMI1
[     6.168] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     6.168] (II) intel(0): Output VIRTUAL1 has no monitor section
[     6.168] (II) intel(0): Enabled output VIRTUAL1
[     6.168] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[     6.169] (==) intel(0): TearFree enabled
[     6.169] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.169] (==) intel(0): DPI set to (96, 96)
[     6.169] (II) Loading sub module "dri3"
[     6.169] (II) LoadModule: "dri3"
[     6.169] (II) Module "dri3" already built-in
[     6.169] (II) Loading sub module "dri2"
[     6.169] (II) LoadModule: "dri2"
[     6.169] (II) Module "dri2" already built-in
[     6.169] (II) Loading sub module "present"
[     6.169] (II) LoadModule: "present"
[     6.169] (II) Module "present" already built-in
[     6.169] (II) UnloadModule: "nvidia"
[     6.169] (II) Unloading nvidia
[     6.172] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[     6.172] (==) intel(0): Backing store enabled
[     6.172] (==) intel(0): Silken mouse enabled
[     6.172] (II) intel(0): HW Cursor enabled
[     6.173] (==) intel(0): DPMS enabled
[     6.173] (==) intel(0): Display hotplug detection enabled
[     6.173] (II) intel(0): [DRI2] Setup complete
[     6.173] (II) intel(0): [DRI2]   DRI driver: i965
[     6.173] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     6.173] (II) intel(0): direct rendering: DRI2 enabled
[     6.173] (II) intel(0): hardware support for Present enabled
[     6.173] (WW) intel(0): Option "Monitor-eDP-1" is not used
[     6.173] (II) Initializing extension Generic Event Extension
[     6.173] (II) Initializing extension SHAPE
[     6.173] (II) Initializing extension MIT-SHM
[     6.174] (II) Initializing extension XInputExtension
[     6.175] (II) Initializing extension XTEST
[     6.175] (II) Initializing extension BIG-REQUESTS
[     6.175] (II) Initializing extension SYNC
[     6.175] (II) Initializing extension XKEYBOARD
[     6.175] (II) Initializing extension XC-MISC
[     6.175] (II) Initializing extension SECURITY
[     6.176] (II) Initializing extension XFIXES
[     6.176] (II) Initializing extension RENDER
[     6.176] (II) Initializing extension RANDR
[     6.176] (II) Initializing extension COMPOSITE
[     6.176] (II) Initializing extension DAMAGE
[     6.176] (II) Initializing extension MIT-SCREEN-SAVER
[     6.176] (II) Initializing extension DOUBLE-BUFFER
[     6.176] (II) Initializing extension RECORD
[     6.176] (II) Initializing extension DPMS
[     6.176] (II) Initializing extension Present
[     6.177] (II) Initializing extension DRI3
[     6.177] (II) Initializing extension X-Resource
[     6.177] (II) Initializing extension XVideo
[     6.177] (II) Initializing extension XVideo-MotionCompensation
[     6.177] (II) Initializing extension SELinux
[     6.177] (II) SELinux: Disabled on system
[     6.177] (II) Initializing extension GLX
[     6.198] (II) AIGLX: Loaded and initialized i965
[     6.198] (II) GLX: Initialized DRI2 GL provider for screen 0
[     6.198] (II) Initializing extension XFree86-VidModeExtension
[     6.198] (II) Initializing extension XFree86-DGA
[     6.198] (II) Initializing extension XFree86-DRI
[     6.198] (II) Initializing extension DRI2
[     6.200] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     6.213] (II) intel(0): Setting screen physical size to 508 x 285
[     6.363] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     6.363] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.363] (II) LoadModule: "libinput"
[     6.363] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.368] (II) Module libinput: vendor="X.Org Foundation"
[     6.368] 	compiled for 1.20.4, module version = 0.28.2
[     6.368] 	Module class: X.Org XInput Driver
[     6.368] 	ABI class: X.Org XInput driver, version 24.1
[     6.368] (II) Using input driver 'libinput' for 'Power Button'
[     6.368] (**) Power Button: always reports core events
[     6.368] (**) Option "Device" "/dev/input/event3"
[     6.368] (**) Option "_source" "server/udev"
[     6.371] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     6.371] (II) event3  - Power Button: device is a keyboard
[     6.371] (II) event3  - Power Button: device removed
[     6.391] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[     6.391] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.391] (**) Option "xkb_model" "pc105"
[     6.391] (**) Option "xkb_layout" "us,ru"
[     6.391] (**) Option "xkb_variant" ","
[     6.391] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[     6.405] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     6.405] (II) event3  - Power Button: device is a keyboard
[     6.406] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[     6.406] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.406] (II) Using input driver 'libinput' for 'Video Bus'
[     6.406] (**) Video Bus: always reports core events
[     6.406] (**) Option "Device" "/dev/input/event5"
[     6.406] (**) Option "_source" "server/udev"
[     6.406] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[     6.406] (II) event5  - Video Bus: device is a keyboard
[     6.406] (II) event5  - Video Bus: device removed
[     6.455] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7/event5"
[     6.455] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.455] (**) Option "xkb_model" "pc105"
[     6.455] (**) Option "xkb_layout" "us,ru"
[     6.455] (**) Option "xkb_variant" ","
[     6.455] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[     6.456] (II) event5  - Video Bus: is tagged by udev as: Keyboard
[     6.456] (II) event5  - Video Bus: device is a keyboard
[     6.457] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     6.457] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.457] (II) Using input driver 'libinput' for 'Video Bus'
[     6.457] (**) Video Bus: always reports core events
[     6.457] (**) Option "Device" "/dev/input/event4"
[     6.457] (**) Option "_source" "server/udev"
[     6.458] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[     6.458] (II) event4  - Video Bus: device is a keyboard
[     6.458] (II) event4  - Video Bus: device removed
[     6.499] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event4"
[     6.499] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     6.499] (**) Option "xkb_model" "pc105"
[     6.499] (**) Option "xkb_layout" "us,ru"
[     6.499] (**) Option "xkb_variant" ","
[     6.499] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[     6.501] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[     6.501] (II) event4  - Video Bus: device is a keyboard
[     6.502] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     6.502] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.502] (II) Using input driver 'libinput' for 'Power Button'
[     6.502] (**) Power Button: always reports core events
[     6.502] (**) Option "Device" "/dev/input/event2"
[     6.502] (**) Option "_source" "server/udev"
[     6.503] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     6.503] (II) event2  - Power Button: device is a keyboard
[     6.503] (II) event2  - Power Button: device removed
[     6.523] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event2"
[     6.523] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[     6.523] (**) Option "xkb_model" "pc105"
[     6.523] (**) Option "xkb_layout" "us,ru"
[     6.523] (**) Option "xkb_variant" ","
[     6.523] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[     6.525] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     6.525] (II) event2  - Power Button: device is a keyboard
[     6.525] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     6.525] (II) No input driver specified, ignoring this device.
[     6.525] (II) This device may have been added with another device file.
[     6.527] (II) config/udev: Adding input device A4Tech USB Mouse Mouse (/dev/input/event7)
[     6.527] (**) A4Tech USB Mouse Mouse: Applying InputClass "libinput pointer catchall"
[     6.527] (II) Using input driver 'libinput' for 'A4Tech USB Mouse Mouse'
[     6.527] (**) A4Tech USB Mouse Mouse: always reports core events
[     6.527] (**) Option "Device" "/dev/input/event7"
[     6.527] (**) Option "_source" "server/udev"
[     6.589] (II) event7  - A4Tech USB Mouse Mouse: is tagged by udev as: Mouse
[     6.589] (II) event7  - A4Tech USB Mouse Mouse: device is a pointer
[     6.589] (II) event7  - A4Tech USB Mouse Mouse: device removed
[     6.619] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:09DA:C10A.0001/input/input8/event7"
[     6.619] (II) XINPUT: Adding extended input device "A4Tech USB Mouse Mouse" (type: MOUSE, id 10)
[     6.619] (**) Option "AccelerationScheme" "none"
[     6.619] (**) A4Tech USB Mouse Mouse: (accel) selected scheme none/0
[     6.619] (**) A4Tech USB Mouse Mouse: (accel) acceleration factor: 2.000
[     6.619] (**) A4Tech USB Mouse Mouse: (accel) acceleration threshold: 4
[     6.681] (II) event7  - A4Tech USB Mouse Mouse: is tagged by udev as: Mouse
[     6.681] (II) event7  - A4Tech USB Mouse Mouse: device is a pointer
[     6.682] (II) config/udev: Adding input device A4Tech USB Mouse Mouse (/dev/input/mouse1)
[     6.682] (II) No input driver specified, ignoring this device.
[     6.682] (II) This device may have been added with another device file.
[     6.683] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event8)
[     6.683] (II) No input driver specified, ignoring this device.
[     6.683] (II) This device may have been added with another device file.
[     6.684] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[     6.684] (II) No input driver specified, ignoring this device.
[     6.684] (II) This device may have been added with another device file.
[     6.685] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[     6.685] (II) No input driver specified, ignoring this device.
[     6.685] (II) This device may have been added with another device file.
[     6.685] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[     6.685] (II) No input driver specified, ignoring this device.
[     6.685] (II) This device may have been added with another device file.
[     6.686] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event16)
[     6.686] (II) No input driver specified, ignoring this device.
[     6.686] (II) This device may have been added with another device file.
[     6.686] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event17)
[     6.686] (II) No input driver specified, ignoring this device.
[     6.686] (II) This device may have been added with another device file.
[     6.687] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event18)
[     6.687] (II) No input driver specified, ignoring this device.
[     6.687] (II) This device may have been added with another device file.
[     6.687] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event19)
[     6.688] (II) No input driver specified, ignoring this device.
[     6.688] (II) This device may have been added with another device file.
[     6.688] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     6.688] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.688] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     6.688] (**) AT Translated Set 2 keyboard: always reports core events
[     6.688] (**) Option "Device" "/dev/input/event0"
[     6.688] (**) Option "_source" "server/udev"
[     6.690] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.690] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     6.691] (II) event0  - AT Translated Set 2 keyboard: device removed
[     6.719] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     6.719] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     6.719] (**) Option "xkb_model" "pc105"
[     6.719] (**) Option "xkb_layout" "us,ru"
[     6.719] (**) Option "xkb_variant" ","
[     6.719] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[     6.721] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.721] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[     6.723] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[     6.723] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     6.723] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[     6.723] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     6.723] (**) Option "Device" "/dev/input/event6"
[     6.723] (**) Option "_source" "server/udev"
[     6.724] (II) event6  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[     6.726] (II) event6  - SynPS/2 Synaptics TouchPad: device is a touchpad
[     6.726] (II) event6  - SynPS/2 Synaptics TouchPad: device removed
[     6.767] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event6"
[     6.767] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[     6.769] (**) Option "AccelerationScheme" "none"
[     6.769] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[     6.769] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     6.769] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     6.771] (II) event6  - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[     6.772] (II) event6  - SynPS/2 Synaptics TouchPad: device is a touchpad
[     6.773] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     6.773] (II) No input driver specified, ignoring this device.
[     6.774] (II) This device may have been added with another device file.
[     6.774] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event10)
[     6.774] (II) No input driver specified, ignoring this device.
[     6.774] (II) This device may have been added with another device file.
[     6.775] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[     6.775] (II) No input driver specified, ignoring this device.
[     6.775] (II) This device may have been added with another device file.
[     6.775] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[     6.775] (II) No input driver specified, ignoring this device.
[     6.775] (II) This device may have been added with another device file.
[     6.776] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event9)
[     6.776] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.776] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[     6.776] (**) HP Wireless hotkeys: always reports core events
[     6.776] (**) Option "Device" "/dev/input/event9"
[     6.776] (**) Option "_source" "server/udev"
[     6.777] (II) event9  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[     6.777] (II) event9  - HP Wireless hotkeys: device is a keyboard
[     6.777] (II) event9  - HP Wireless hotkeys: device removed
[     6.807] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event9"
[     6.807] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 13)
[     6.807] (**) Option "xkb_model" "pc105"
[     6.807] (**) Option "xkb_layout" "us,ru"
[     6.807] (**) Option "xkb_variant" ","
[     6.807] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[     6.808] (II) event9  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[     6.808] (II) event9  - HP Wireless hotkeys: device is a keyboard
[     6.809] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[     6.809] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.809] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[     6.809] (**) HP WMI hotkeys: always reports core events
[     6.809] (**) Option "Device" "/dev/input/event12"
[     6.809] (**) Option "_source" "server/udev"
[     6.810] (II) event12 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     6.810] (II) event12 - HP WMI hotkeys: device is a keyboard
[     6.810] (II) event12 - HP WMI hotkeys: device removed
[     6.839] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event12"
[     6.839] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[     6.839] (**) Option "xkb_model" "pc105"
[     6.839] (**) Option "xkb_layout" "us,ru"
[     6.839] (**) Option "xkb_variant" ","
[     6.839] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[     6.840] (II) event12 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     6.840] (II) event12 - HP WMI hotkeys: device is a keyboard
[     8.169] (II) intel(0): EDID vendor "LGD", prod id 1134
[     8.169] (II) intel(0): Printing DDC gathered Modelines:
[     8.169] (II) intel(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[     8.169] (II) intel(0): Modeline "1920x1080"x0.0   92.47  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (44.5 kHz e)

Монитор подключен через HDMI к интегрированной видеокарте NVIDIA

А это точно? Все что я слышал до сих пор про ноуты с двумя видяхами - это что внешняя работает только для рендеринга, а изображение всегда передается через встройку.

morse ★★★★★ ()
Ответ на: комментарий от morse

При изменении Xorg.conf.d/10-monitor.conf

Section "Device"
  Identifier "Intel"
  Driver "intel"
  Option "Monitor-eDP-1" "eDP1"
EndSection

на

Section "Device"
  Identifier "Intel"
  Driver "nvidia"
  Option "Monitor-eDP-1" "eDP1"
EndSection

Отключается встроенный дисплей и запускается монитор подсоединеный через hdmi как я думаю к nvidia видеокарте.

vladislavponomaryov ()
Ответ на: комментарий от vladislavponomaryov

А ты уверен что там была именно ксинерама, а не просто правильно настроенные иксы? Сам же вон показываешь, что при старте с интеллом randr разъем видит, просто не видит подключенного монитора. Если бы разъем был нвидиевский, его бы никто не увидел без дров на видяху.

morse ★★★★★ ()

А я просто поставил 10 Винду и монитор у меня подключается к ноуту без крксноглазия. Привет петушкам, которые кудахчут, что линукс готов для десктопа.

anonymous ()
Ответ на: комментарий от anonymous

Чукча не читатель, чукча писатель?

Цитирую ТС: «Раньше ноутбук работал с дисплеем и монитором на Linux Mint 19.1 Tessa.»

Можно поставить KDE Neon или Fedora и всё будет работать искаробки. А можно накатать debian, arch, gento и т.п. и настроить всё самому. Дистрибутивов много разных, для разных задач и от разных людей.

anonymous ()