LINUX.ORG.RU

CUPS не печатает, не растёт кокос


0

0

Я тут какбы LFS собираю. Всё замечательно, только CUPS не печатает. Принтер Samsung ML-1520P. Делаю так: 1. Взял cups 1.1.23, поставил его 2. Взял Samsung-ML-1510-gdi.ppd с linuxprinting.org, поместил его в /usr/share/cups/model/samsung 3. Взял ESP Ghostscript-7.07.1, поставил его (без libgs.so) 4. Взял шрифты ghostscript-fonts-std-8.11.tar.gz и gnu-gs-fonts-other-6.0.tar.gz, поместил их в /usr/share/ghostscript/7.07/fonts 5. Сделал /ets/rc.d/init.d/cups restart 6. Открыл http://localhost:631/admin и добавил принтер (через /dev/lp0)

Принтер не печатает. Вообще никак не реагирует. Если сделать "echo "abc" > /dev/lp0", то получаю радостное мигание лампочки на принтере (обычно так бывает когда принтер начинает печатать) и некий шум из принтера (обычно так бывает когда принтер начинает печатать). Но ничего не печатается.

Прилагать сюда всякие /etc/cups/*.conf не вижу смысла, ибо они совпадают с теми. которые лежат в FC4, а там всё работает.

anonymous

Re: CUPS не печатает, не растёт кокос

Прилагаю к вышенапечатанному CUPS'овый лог, возникающий после жмакания ссылки "Print Test Page" в веб-интерфейсе: (ибо "сообщение слишком большое" получаю я если вместе в логом пытаюсь запостить свой вопрос)

ReadClient: 7 GET /printers/Samsung_ML-1520P?op=print-test-page HTTP/1.1 CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 17899 Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=17899) SendCommand: 7 file=11 AcceptClient: 10 from localhost:631. ReadClient: 10 POST /printers/Samsung_ML-1520P HTTP/1.1 print_job: request file type is application/postscript. check_quotas: requesting-user-name = 'root' print_job: requesting-user-name = 'root' Adding default job-sheets values "none,none"... Adding start banner page "none" to job 11. Adding end banner page "none" to job 11. Job 11 queued on 'Samsung_ML-1520P' by 'root'. Job 11 hold_until = 0 StartJob(11, 0x80949e0) StartJob() id = 11, file = 0/1 job-sheets=none,none banner_page = 0 StartJob: argv = "Samsung_ML-1520P","11","root","Test Page","1","","/var/spool/cups/d00011-001" StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin" StartJob: envp[1]="SOFTWARE=CUPS/1.1" StartJob: envp[2]="USER=root" StartJob: envp[3]="CHARSET=utf-8" StartJob: envp[4]="LANG=ru_RU" StartJob: envp[5]="PPD=/etc/cups/ppd/Samsung_ML-1520P.ppd" StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups" StartJob: envp[7]="RIP_MAX_CACHE=8m" StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp" StartJob: envp[9]="CONTENT_TYPE=application/postscript" StartJob: envp[10]="DEVICE_URI=parallel:/dev/lp0" StartJob: envp[11]="PRINTER=Samsung_ML-1520P" StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups" StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts" StartJob: envp[14]="CUPS_SERVER=localhost" StartJob: envp[15]="IPP_PORT=631" StartJob: statusfds = [ 12 13 ] StartJob: filterfds[1] = [ 14 -1 ] StartJob: filter = "/usr/lib/cups/filter/pstops" StartJob: filterfds[0] = [ 15 16 ] start_process("/usr/lib/cups/filter/pstops", 0xbffee760, 0xbffedad0, 14, 16, 13) Started filter /usr/lib/cups/filter/pstops (PID 17900) for job 11. StartJob: filter = "/usr/lib/cups/filter/foomatic-rip" StartJob: filterfds[1] = [ 14 17 ] start_process("/usr/lib/cups/filter/foomatic-rip", 0xbffee760, 0xbffedad0, 15, 17, 13) Started filter /usr/lib/cups/filter/foomatic-rip (PID 17901) for job 11. StartJob: backend = "/usr/lib/cups/backend/parallel" StartJob: filterfds[0] = [ -1 15 ] start_process("/usr/lib/cups/backend/parallel", 0xbffee760, 0xbffedad0, 14, 15, 13) Started backend (PID 17902) for job 11. ProcessIPPRequest: 10 status_code=0 PID 17901 stopped with status 22! [Job 11] Page = 595x842; 0,0 to 595,842 [Job 11] slowcollate=0, slowduplex=0, sloworder=0 [Job 11] 0 %%BoundingBox: 0 0 612 792 [Job 11] 0 %%Pages: 1 [Job 11] 0 %%LanguageLevel: 1 [Job 11] 0 %%DocumentData: Clean7Bit [Job 11] 0 %%DocumentSuppliedResources: procset testprint/1.1 [Job 11] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman [Job 11] 0 %%Creator: Michael Sweet, Easy Software Products [Job 11] 0 %%CreationDate: May 11, 1999 [Job 11] 0 %%Title: Test Page [Job 11] 0 %%EndComments [Job 11] 0 %%BeginProlog [Job 11] 0 %%BeginResource procset testprint 1.1 0 [Job 11] 0 %%EndResource [Job 11] 0 %%EndProlog [Job 11] 0 %%Page: 1 1 [Job 11] 0 %%Page: 1 1 [Job 11] pw = 595.0, pl = 842.0 [Job 11] PageLeft = 0.0, PageRight = 595.0 [Job 11] PageTop = 842.0, PageBottom = 0.0 [Job 11] PageWidth = 595.0, PageLength = 842.0 [Job 11] /usr/lib/cups/filter/foomatic-rip: No such file or directory CloseClient: 10 [Job 11] 0 %%EOF [Job 11] Saw EOF! UpdateJob: job 11, file 0 is complete. CancelJob: id = 11 StopJob: id = 11, force = 0 StopJob: printer state is 3 ReadClient: 7 GET /favicon.ico HTTP/1.1 SendError: 7 code=404 (Not Found) CloseClient: 7

С нетерпением жду ваших отзывов :)

anonymous ()
Ответ на: Re: CUPS не печатает, не растёт кокос от anonymous

Re: CUPS не печатает, не растёт кокос

Так ИМХО лучше :)

ReadClient: 7 GET /printers/Samsung_ML-1520P?op=print-test-page HTTP/1.1
CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 17899
Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=17899)
SendCommand: 7 file=11
AcceptClient: 10 from localhost:631.
ReadClient: 10 POST /printers/Samsung_ML-1520P HTTP/1.1
print_job: request file type is application/postscript.
check_quotas: requesting-user-name = 'root'
print_job: requesting-user-name = 'root'
Adding default job-sheets values "none,none"...
Adding start banner page "none" to job 11.
Adding end banner page "none" to job 11.
Job 11 queued on 'Samsung_ML-1520P' by 'root'.
Job 11 hold_until = 0
StartJob(11, 0x80949e0)
StartJob() id = 11, file = 0/1
job-sheets=none,none
banner_page = 0
StartJob: argv = "Samsung_ML-1520P","11","root","Test Page","1","","/var/spool/cups/d00011-001"
StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
StartJob: envp[1]="SOFTWARE=CUPS/1.1"
StartJob: envp[2]="USER=root"
StartJob: envp[3]="CHARSET=utf-8"
StartJob: envp[4]="LANG=ru_RU"
StartJob: envp[5]="PPD=/etc/cups/ppd/Samsung_ML-1520P.ppd"
StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
StartJob: envp[7]="RIP_MAX_CACHE=8m"
StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
StartJob: envp[9]="CONTENT_TYPE=application/postscript"
StartJob: envp[10]="DEVICE_URI=parallel:/dev/lp0"
StartJob: envp[11]="PRINTER=Samsung_ML-1520P"
StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
StartJob: envp[14]="CUPS_SERVER=localhost"
StartJob: envp[15]="IPP_PORT=631"
StartJob: statusfds = [ 12 13 ]
StartJob: filterfds[1] = [ 14 -1 ]
StartJob: filter = "/usr/lib/cups/filter/pstops"
StartJob: filterfds[0] = [ 15 16 ]
start_process("/usr/lib/cups/filter/pstops", 0xbffee760, 0xbffedad0, 14, 16, 13)
Started filter /usr/lib/cups/filter/pstops (PID 17900) for job 11.
StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
StartJob: filterfds[1] = [ 14 17 ]
start_process("/usr/lib/cups/filter/foomatic-rip", 0xbffee760, 0xbffedad0, 15, 17, 13)
Started filter /usr/lib/cups/filter/foomatic-rip (PID 17901) for job 11.
StartJob: backend = "/usr/lib/cups/backend/parallel"
StartJob: filterfds[0] = [ -1 15 ]
start_process("/usr/lib/cups/backend/parallel", 0xbffee760, 0xbffedad0, 14, 15, 13)
Started backend (PID 17902) for job 11.
ProcessIPPRequest: 10 status_code=0
PID 17901 stopped with status 22!
[Job 11] Page = 595x842; 0,0 to 595,842
[Job 11] slowcollate=0, slowduplex=0, sloworder=0
[Job 11] 0 %%BoundingBox: 0 0 612 792
[Job 11] 0 %%Pages: 1
[Job 11] 0 %%LanguageLevel: 1
[Job 11] 0 %%DocumentData: Clean7Bit
[Job 11] 0 %%DocumentSuppliedResources: procset testprint/1.1
[Job 11] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
[Job 11] 0 %%Creator: Michael Sweet, Easy Software Products
[Job 11] 0 %%CreationDate: May 11, 1999
[Job 11] 0 %%Title: Test Page
[Job 11] 0 %%EndComments
[Job 11] 0 %%BeginProlog
[Job 11] 0 %%BeginResource procset testprint 1.1 0
[Job 11] 0 %%EndResource
[Job 11] 0 %%EndProlog
[Job 11] 0 %%Page: 1 1
[Job 11] 0 %%Page: 1 1
[Job 11] pw = 595.0, pl = 842.0
[Job 11] PageLeft = 0.0, PageRight = 595.0
[Job 11] PageTop = 842.0, PageBottom = 0.0
[Job 11] PageWidth = 595.0, PageLength = 842.0
[Job 11] /usr/lib/cups/filter/foomatic-rip: No such file or directory
CloseClient: 10
[Job 11] 0 %%EOF
[Job 11] Saw EOF!
UpdateJob: job 11, file 0 is complete.
CancelJob: id = 11
StopJob: id = 11, force = 0
StopJob: printer state is 3
ReadClient: 7 GET /favicon.ico HTTP/1.1
SendError: 7 code=404 (Not Found)
CloseClient: 7

anonymous ()
Ответ на: Re: CUPS не печатает, не растёт кокос от anonymous

Re: CUPS не печатает, не растёт кокос

Итакс, исправил это
[Job 11] /usr/lib/cups/filter/foomatic-rip: No such file or directory
и теперь cups мигает лампочкой на принтере и мычит - как при echo "123" > /dev/lp0
Кажется, будто теперь проблема не в cups, ибо на эту комманду FC4 печатает.

anonymous ()
Ответ на: Re: CUPS не печатает, не растёт кокос от Puzan

Re: CUPS не печатает, не растёт кокос

Спасибо за совет. Было бы, конечно, замечательно, если бы ты вспомнил как она решилась :)
ppd пробовал брать с linuxprinting.org и из FC4. Результат один, так что дело вроде в другом.

anonymous ()
Ответ на: Re: CUPS не печатает, не растёт кокос от anonymous

Re: CUPS не печатает, не растёт кокос

Вот, кстати, теперешний лог. Если вдруг кому интересно:

ReadClient: 7 GET /admin HTTP/1.1
SendError: 7 code=401 (Unauthorized)
CloseClient: 7
AcceptClient: 7 from localhost:631.
ReadClient: 7 GET /admin HTTP/1.1
SendError: 7 code=401 (Unauthorized)
CloseClient: 7
AcceptClient: 7 from localhost:631.
ReadClient: 7 GET /admin HTTP/1.1
CGI /usr/lib/cups/cgi-bin/admin.cgi started - PID = 2845
Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=2845)
SendCommand: 7 file=10
AcceptClient: 9 from localhost:631.
ReadClient: 9 GET /cups.css HTTP/1.1
SendFile: 9 file=11
ReadClient: 9 GET /favicon.ico HTTP/1.1
SendError: 9 code=404 (Not Found)
CloseClient: 9
ReadClient: 7 GET /printers/ HTTP/1.1
CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 2847
Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=2847)
SendCommand: 7 file=10
AcceptClient: 9 from localhost:631.
ReadClient: 9 POST / HTTP/1.1
ProcessIPPRequest: 9 status_code=1
ReadClient: 9 POST / HTTP/1.1
ProcessIPPRequest: 9 status_code=1
CloseClient: 9
ReadClient: 7 GET /favicon.ico HTTP/1.1
SendError: 7 code=404 (Not Found)
AcceptClient: 7 from localhost:631.
ReadClient: 7 GET /printers/Samsung_ML-1520P?op=print-test-page HTTP/1.1
CGI /usr/lib/cups/cgi-bin/printers.cgi started - PID = 2849
Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=2849)
SendCommand: 7 file=10
AcceptClient: 9 from localhost:631.
ReadClient: 9 POST /printers/Samsung_ML-1520P HTTP/1.1
print_job: request file type is application/postscript.
check_quotas: requesting-user-name = 'root'
print_job: requesting-user-name = 'root'
Adding default job-sheets values "none,none"...
I Adding start banner page "none" to job 13.
Adding end banner page "none" to job 13.
Job 13 queued on 'Samsung_ML-1520P' by 'root'.
Job 13 hold_until = 0
StartJob(13, 0x929e4b8)
StartJob() id = 13, file = 0/1
job-sheets=none,none
banner_page = 0
StartJob: argv = "Samsung_ML-1520P","13","root","Test Page","1","","/var/spool/cups/d00013-001"
StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
StartJob: envp[1]="SOFTWARE=CUPS/1.1"
StartJob: envp[2]="USER=root"
StartJob: envp[3]="CHARSET=utf-8"
StartJob: envp[4]="LANG=en_US"
StartJob: envp[5]="PPD=/etc/cups/ppd/Samsung_ML-1520P.ppd"
StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
StartJob: envp[7]="RIP_MAX_CACHE=8m"
StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
StartJob: envp[9]="CONTENT_TYPE=application/postscript"
StartJob: envp[10]="DEVICE_URI=parallel:/dev/lp0"
StartJob: envp[11]="PRINTER=Samsung_ML-1520P"
StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
StartJob: envp[14]="CUPS_SERVER=localhost"
StartJob: envp[15]="IPP_PORT=631"
StartJob: envp[16]="DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-gtz9BAWaYg,guid= 63ef04434ff3aab36aebb4a778a1c800"
StartJob: statusfds = [ 2 11 ]
StartJob: filterfds[1] = [ 12 -1 ]
StartJob: filter = "/usr/lib/cups/filter/pstops"
StartJob: filterfds[0] = [ 13 14 ]
start_process("/usr/lib/cups/filter/pstops", 0xbfd5dc80, 0xbfd5d1f8, 12, 14, 11)
Started filter /usr/lib/cups/filter/pstops (PID 2850) for job 13.
StartJob: filter = "/usr/lib/cups/filter/foomatic-rip"
StartJob: filterfds[1] = [ 12 15 ]
start_process("/usr/lib/cups/filter/foomatic-rip", 0xbfd5dc80, 0xbfd5d1f8, 13, 15, 11)
Started filter /usr/lib/cups/filter/foomatic-rip (PID 2851) for job 13.

anonymous ()
Ответ на: Re: CUPS не печатает, не растёт кокос от anonymous

Re: CUPS не печатает, не растёт кокос


StartJob: backend = "/usr/lib/cups/backend/parallel"
StartJob: filterfds[0] = [ -1 13 ]
start_process("/usr/lib/cups/backend/parallel", 0xbfd5dc80, 0xbfd5d1f8, 12, 13, 11)
Started backend /usr/lib/cups/backend/parallel (PID 2852) for job 13.
ProcessIPPRequest: 9 status_code=0
CloseClient: 9
[Job 13] Page = 595x842; 36,36 to 559,806
[Job 13] slowcollate=0, slowduplex=0, sloworder=0
[Job 13] 0 %%BoundingBox: 0 0 612 792
[Job 13] 0 %%Pages: 1
[Job 13] 0 %%LanguageLevel: 1
[Job 13] 0 %%DocumentData: Clean7Bit
[Job 13] 0 %%DocumentSuppliedResources: procset testprint/1.1
[Job 13] 0 %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
[Job 13] 0 %%Creator: Michael Sweet, Easy Software Products
[Job 13] 0 %%CreationDate: May 11, 1999
[Job 13] 0 %%Title: Test Page
[Job 13] 0 %%EndComments
[Job 13] 0 %%BeginProlog
[Job 13] 0 %%BeginResource procset testprint 1.1 0
[Job 13] 0 %%EndResource
[Job 13] 0 %%EndProlog
[Job 13] 0 %%Page: 1 1
[Job 13] 0 %%Page: 1 1
[Job 13] pw = 523.0, pl = 770.0
[Job 13] PageLeft = 36.0, PageRight = 559.0
[Job 13] PageTop = 806.0, PageBottom = 36.0
[Job 13] PageWidth = 595.0, PageLength = 842.0
[Job 13] 0 %%EOF
[Job 13] Saw EOF!
ReadClient: 7 GET /favicon.ico HTTP/1.1
SendError: 7 code=404 (Not Found)
CloseClient: 7
[Job 13] foomatic-rip version $Revision: 3.43.2.7 $ running...
[Job 13] Parsing PPD file ...
[Job 13] *cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
[Job 13] Added option ColorSpace
[Job 13] Added option PageSize
[Job 13] Added option PageRegion
[Job 13] Added option ImageableArea
[Job 13] Added option PaperDimension
[Job 13] Added option Manualfeed
[Job 13] Added option MediaType
[Job 13] Added option Resolution
[Job 13] Added option Economode
[Job 13] Added option RET
[Job 13] Added option Copies
[Job 13] Added option Density
[Job 13] Added option AllowReprint
[Job 13] Added option Altitude
[Job 13] Added option JamRecovery
[Job 13] Added option PageTimeout
[Job 13] Added option PowerSaveTime
[Job 13] Added option PowerSaving
[Job 13] Added option PageSizeJCL
[Job 13] Added option PageSizePS
[Job 13] Added option Font
[Job 13]
[Job 13] Parameter Summary
[Job 13] -----------------
[Job 13]
[Job 13] Spooler: cups
[Job 13] Printer: Samsung_ML-1520P
[Job 13] PPD file: /etc/cups/ppd/Samsung_ML-1520P.ppd
[Job 13] Printer model: Samsung ML-1510 Foomatic/gdi (recommended)
[Job 13] Job title: Test Page
[Job 13] File(s) to be printed:
[Job 13] <STDIN>

anonymous ()
Ответ на: Re: CUPS не печатает, не растёт кокос от anonymous

Re: CUPS не печатает, не растёт кокос


[Job 13] ================================================
[Job 13]
[Job 13] File: <STDIN>
[Job 13]
[Job 13] ================================================
[Job 13]
[Job 13] Reading PostScript input ...
[Job 13] --> This document is DSC-conforming!
[Job 13]
[Job 13] -----------
[Job 13] Found: %%BeginProlog
[Job 13] Found: %%EndProlog
[Job 13]
[Job 13] -----------
[Job 13] Found: %%BeginSetup
[Job 13] Found: %%BeginFeature: *PageRegion A4
[Job 13] Option: PageRegion=A4 --> Option will be set by PostScript interpreter
[Job 13] Found: %% FoomaticRIPOptionSetting: PageSize=A4
[Job 13] Option: PageSize=A4 --> Setting option
[Job 13] Found: %%BeginFeature: *Manualfeed Off
[Job 13] Option: Manualfeed=Off --> Setting option
[Job 13] Found: %% FoomaticRIPOptionSetting: Manualfeed=Off
[Job 13] Option: Manualfeed=Off --> Setting option
[Job 13] Found: %%BeginFeature: *Economode Off
[Job 13] Option: Economode=Off --> Setting option
[Job 13] Found: %% FoomaticRIPOptionSetting: Economode=Off
[Job 13] Option: Economode=Off --> Setting option
[Job 13] Found: %%BeginFeature: *Resolution 600x600dpi
[Job 13] Option: Resolution=600x600dpi --> Option will be set by PostScript interpreter
[Job 13] Found: %%BeginFeature: *MediaType Normal
[Job 13] Option: MediaType=Normal --> Setting option
[Job 13] Found: %% FoomaticRIPOptionSetting: MediaType=Normal
[Job 13] Option: MediaType=Normal --> Setting option
[Job 13] Found: %%BeginFeature: *Density 3
[Job 13] Option: Density=3 --> Setting option
[Job 13] Found: %% FoomaticRIPOptionSetting: Density=3
[Job 13] Option: Density=3 --> Setting option
[Job 13] Found: %%BeginFeature: *JamRecovery Yes
[Job 13] Option: JamRecovery=Yes --> Setting option
[Job 13] Found: %% FoomaticRIPOptionSetting: JamRecovery=Yes
[Job 13] Option: JamRecovery=Yes --> Setting option
[Job 13] Found: %%BeginFeature: *AllowReprint Yes
[Job 13] Option: AllowReprint=Yes --> Setting option
[Job 13] Found: %% FoomaticRIPOptionSetting: AllowReprint=Yes
[Job 13] Option: AllowReprint=Yes --> Setting option
[Job 13] Found: %%BeginFeature: *Altitude Low
[Job 13] Option: Altitude=Low --> Setting option
[Job 13] Found: %% FoomaticRIPOptionSetting: Altitude=Low
[Job 13] Option: Altitude=Low --> Setting option
[Job 13] Found: %%BeginFeature: *Copies 1
[Job 13] Option: Copies=1 --> Setting option
[Job 13] Found: %% FoomaticRIPOptionSetting: Copies=1
[Job 13] Option: Copies=1 --> Setting option
[Job 13] Found: %%BeginFeature: *PageTimeout 15
[Job 13] Option: PageTimeout=15 --> Setting option
[Job 13] Found: %% FoomaticRIPOptionSetting: PageTimeout=15
[Job 13] Option: PageTimeout=15 --> Setting option
[Job 13] Found: %%BeginFeature: *PowerSaving On
[Job 13] Option: PowerSaving=On --> Setting option
[Job 13] Found: %% FoomaticRIPOptionSetting: PowerSaving=On
[Job 13] Option: PowerSaving=On --> Setting option
[Job 13] Found: %%BeginFeature: *PowerSaveTime 5
[Job 13] Option: PowerSaveTime=5 --> Setting option
[Job 13] Found: %% FoomaticRIPOptionSetting: PowerSaveTime=5
[Job 13] Option: PowerSaveTime=5 --> Setting option
[Job 13] Found: %%EndSetup
[Job 13] Inserting PostScript code for CUPS' page accounting

anonymous ()
Ответ на: Re: CUPS не печатает, не растёт кокос от anonymous

Re: CUPS не печатает, не растёт кокос


[Job 13] -----------
[Job 13] New page: 1 1
[Job 13] Inserting option code into "PageSetup" section.
[Job 13] No page header or page header not DSC-conforming
[Job 13] Stopping search for page header options
[Job 13] Found:
[Job 13] pageHeight sub % Move down...
[Job 13] --> Output goes directly to the renderer now.
[Job 13]
[Job 13]
[Job 13] Starting renderer
[Job 13] JCL: <job data>
[Job 13]
[Job 13] renderer PID kid4=2854
[Job 13] renderer command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=gdi -sOutputFile=- - | perl -p -e 's/PJL PAGE LETTER/PJL PAGE A4/; s/PJL PAGE (\S*) AUTO/PJL PAGE $1 AUTO/; s/PJL SET TONERSAVE = OFF/PJL SET TONERSAVE = OFF\r\n\@PJL SET ECONOMODE = OFF/; s/PJL SET PAPERTYPE = NORMAL/PJL SET PAPERTYPE = NORMAL/; s/PJL SET DENSITY = 1/PJL SET DENSITY = 3/; s/(\@PJL ENTER LANGUAGE)/\@PJL SET RET = OFF\r\n$1/; s/(\@PJL ENTER LANGUAGE)/\@PJL SET JAMRECOVERY = ON\r\n$1/; s/(\@PJL ENTER LANGUAGE)/\@PJL SET REPRINT = ON\r\n$1/; s/(\@PJL ENTER LANGUAGE)/\@PJL SET ALTITUDE = OFF\r\n$1/; s/PJL COPIES = 1/PJL COPIES = 1/; s/(\@PJL ENTER LANGUAGE)/\@PJL DEFAULT TIMEOUT = 15\r\n$1/; s/(\@PJL ENTER LANGUAGE)/\@PJL DEFAULT POWERSAVE = ON\r\n$1/; s/(\@PJL ENTER LANGUAGE)/\@PJL DEFAULT POWERSAVETIME = 5\r\n$1/; '
[Job 13]
[Job 13] Closing renderer
[Job 13] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=gdi' '-sOutputFile=| cat >&3' '/dev/fd/0' 3>&1 1>&2
AcceptClient: 9 from localhost:631.
ReadClient: 9 GET /favicon.ico HTTP/1.1
SendError: 9 code=404 (Not Found)
CloseClient: 9
[Job 13] KID3 exited with status 0
[Job 13] tail process done writing data to STDOUT
[Job 13] KID4 finished
[Job 13] KID4 exited with status 0
[Job 13] Renderer exit stat: 0
[Job 13] KID3 finished
[Job 13] Renderer process finished
[Job 13]
[Job 13] Closing foomatic-rip.
UpdateJob: job 13, file 0 is complete.
CancelJob: id = 13
StopJob: id = 13, force = 0
StopJob: printer state is 3

anonymous ()
Ответ на: Re: CUPS не печатает, не растёт кокос от anonymous

Re: CUPS не печатает, не растёт кокос

Короче, дятел я.
Во-первых приложил логи (те, которые последние) от FC4.
Во-вторых, косяк был в том, что я положил только фильтр foomatic-rip и не положил foomatic-gswrapper.
Сейчас всё работает. Прошу прощения за свою халатность. Спасибо.

anonymous ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.