LINUX.ORG.RU
ФорумAdmin

SAMBA не пускает с другой сети


0

1

Доброго времнени суток. Беда! Win домен, сеть порядка 300 машин winXP и 7. Сеть разбита на несколько сегментов, соединенных между собой по VPN. Почти в каждом сегменте есть свой домен контроллер, привязанный к сайту сегмента сети. В этом всем безобразии есть Linux сервер занимающийся приемом факсов. Принятые факсы он складывает в расшаренную SAMB'ой шару. Беда вот в чем. Если пользователь заходит с тойже сети в которой находится SAMBA, то все ок, а если с любой другой, то может пройти только пару вложенных папок, а при заходе в папку с факсами exsplorer благополучно вешается, и в конце коцев выдает сообщение что доступ не может быть получен.... и ниже «не найдено имя группы» Linux машина в домене, группы и пользователей получает вроде нормально

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = RDS
   realm = RDS.LAN
   local master = no
   preferred master = no
   

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0
hosts allow = 192.168.

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = ADS
   auth methods = winbind
   password server = dc-01.rds.lan, dc-02.rds.lan, dc-03.rds.lan, dc-05.rds.lan

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true
   dns proxy = no
   socket options = TCP_NODELAY

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped 
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
   domain master = no
   local master = no
   preferred master = no
   os level = 0
   domain logons = no
   
# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
   idmap uid = 10000-40000
   idmap gid = 10000-40000
   winbind use default domain = yes
   winbind refresh tickets = yes
   case sensitive = No
   
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
   winbind enum groups = yes
   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
  # usershare allow
  # guestsкуакrefresh
  
  
  # guest account = guest


#




[Входящие факсы]
browseable = yes
path = /home/tux/FAX/incoming
guest ok = Yes
valid users = "@RDS\Пользователи домена"
read list = "@RDS\Пользователи домена"
write list = "@RDS\FAX_RW"
create mask = 664
directory mask = 664
force group = "@RDS\FAX_RW"
readonly = No

[Share]
browseable = yes
#valid users = "@RDS\Администраторы домена"
#write list = "@RDS\Администраторы домена"
#read list = "@RDS\Администраторы домена"
path = /home/tux/share
readonly = no
directory mask = 666
guest ok = Yes

[TEST]
browseable = yes
path = /home/tux/TEST
readonly = no
guest ok = yes
Расшаренна папка incoming, в ней есть папка 2012->Февраль->тут файлы с факсами *.tif Нормально доходит до папки «Январь», а при входе в нее все виснит Помогите, где копать? Samba 3.4.7, ubuntu 10.04 server

Ответ на: комментарий от chegeware
Load smb config files from /etc/samba/smb.conf
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
Processing section "[printers]"
Processing section "[print$]"
Processing section "[Входящие факсы]"
Processing section "[Share]"
Processing section "[TEST]"
Loaded services file OK.
WARNING: You have some share names that are longer than 12 characters.
These may not be accessible to some older clients.
(Eg. Windows9x, WindowsMe, and smbclient prior to Samba 3.0.)
Server role: ROLE_DOMAIN_MEMBER
Press enter to see a dump of your service definitions

[global]
        workgroup = RDS
        realm = RDS.LAN
        server string = %h server (Samba, Ubuntu)
        security = ADS
        auth methods = winbind
        map to guest = Bad User
        obey pam restrictions = Yes
        password server = dc-01.rds.lan
        pam password change = Yes
        passwd program = /usr/bin/passwd %u
        passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:                                                                                                 * %n\n *password\supdated\ssuccessfully* .
        unix password sync = Yes
        syslog = 0
        log file = /var/log/samba/log.%m
        max log size = 1000
        smb ports = 139
        os level = 0
        local master = No
        domain master = No
        panic action = /usr/share/samba/panic-action %d
        idmap uid = 10000-40000
        idmap gid = 10000-40000
        winbind enum users = Yes
        winbind enum groups = Yes
        winbind use default domain = Yes
        winbind refresh tickets = Yes
        case sensitive = No

[printers]
        comment = All Printers
        path = /var/spool/samba
        create mask = 0700
        printable = Yes
        browseable = No
        browsable = No

[print$]
        comment = Printer Drivers
        path = /var/lib/samba/printers
        browseable = No
        browsable = No

[Входящие факсы]
        path = /home/tux/FAX/incoming
        force group = "@RDS\FAX_RW"
        read only = No
        create mask = 0664
        directory mask = 0664
        guest ok = Yes

[Share]
        path = /home/tux/share
        read only = No
        directory mask = 0666
        guest ok = Yes

[TEST]
        path = /home/tux/TEST
        valid users = "@RDS\пользователи домена"
        read list = "@RDS\пользователи домена"
        read only = No
        guest ok = Yes

Zoldan ()
Ответ на: комментарий от Zoldan

Притом, если в папке нет файлов или 1-2, то долго тупит, но может открыться. А если 5-10, то тупит и выдает «сетевой ресурс больше не доступен»

Zoldan ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.