LINUX.ORG.RU
ФорумAdmin

синхронизация времени


0

0

Как лечить:

$ sudo ntpdate 12 Nov 00:13:41 ntpdate[8376]: no servers can be used, exiting

При этом:

$ ping ru.pool.ntp.org -c 1 PING ru.pool.ntp.org (212.57.153.17) 56(84) bytes of data. 64 bytes from 212.57.153.17: icmp_seq=1 ttl=45 time=1092 ms

--- ru.pool.ntp.org ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 1092.369/1092.369/1092.369/0.000 ms

$ cat /etc/ntp.conf # /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help

driftfile /var/lib/ntp/ntp.drift

# Enable this if you want statistics to be logged. #statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats filegen loopstats file loopstats type day enable filegen peerstats file peerstats type day enable filegen clockstats file clockstats type day enable

# You do need to talk to an NTP server or two (or three).

# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for # details. The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>; # might also be helpful. # # Note that "restrict" applies to both servers and clients, so a configuration # that might be intended to block requests from certain clients could also end # up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration. restrict -4 default kod notrap nomodify nopeer noquery restrict -6 default kod notrap nomodify nopeer noquery

# Local users may interrogate the ntp server more closely. restrict 127.0.0.1 restrict ::1

# Clients from this (example!) subnet have unlimited access, but only if # cryptographically authenticated. #restrict 192.168.123.0 mask 255.255.255.0 notrust

# If you want to provide time to your local subnet, change the next line. # (Again, the address is an example only.) #broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet, de-comment the # next lines. Please do this only if you trust everybody on the network! #disable auth #broadcastclient server ru.pool.ntp.org server ru.pool.ntp.org server ru.pool.ntp.org

anonymous

как лечить людей, которые пишут такую ерунду и хотят, чтобы им помогли?

zgen ★★★★★
()

демон ntp и ntpdate две большие разницы.

При запуске ntpdate нужно вручную указывать серверы времени ( ntpdate ru.pool.ntp.org ). Поэтому в debian, например, есть скрипт ntpdate-debian, забирающий информацию о серверах из /etc/defaults/ntpdate

PS. При цитировании логов выбирайте "user-line breaks" или "preformatted text"

router ★★★★★
()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.