LINUX.ORG.RU
ФорумAdmin

Проблемы с вводом OMV5 в домен

 , , , ,


0

1

Всем привет. Возникла тут проблема с вводом FS на OpenMediaVault 5 в домен Active-directory. Я настраивал по этому руководству. К сожалению для 5-го не нашел. Но после сохранения настроек я не вижу списка доменных пользователей в OMV, и не могу распределять права на общие папки. Что самое интересное, машина в домене и комманда id "username" нормально отвечает:

# id vasya
uid=635601109(vasya) gid=635600513(пользователи домена) groups=635600513(пользователи домена),635600512(администраторы домена),635600572(группа с запрещением репликации паролей rodc)

и getent тоже всё видит.

getent passwd mahsa
mahsa:*:635601108:635600513:Mahsa:/home/mahsa@test.ts:/bin/bash

все настройки точно выполнил кроме создания домашних папок, мне это не нужно, только авторизация для CIFS.. Подскажите в чем проблема кто знает. Раньше года 3-4 назад настраивал правда через winbind, но тогда и версии были другие, Debian 7, ф сейчас уже 10.7. Ниже приведены листинги файлов конфигурации. sss

cat /etc/sssd/sssd.conf

[sssd]
domains = test.ts
config_file_version = 2
services = nss, pam


[domain/test.ts]
ad_domain = test.ts
ad_server = 1ctest.test.ts.
chpass_provider = ad
access_provider = simple

krb5_realm = TEST.TS
realmd_tags = manages-system joined-with-adcli
cache_credentials = True
id_provider = ad
krb5_store_password_if_offline = True
default_shell = /bin/bash
ldap_id_mapping = True
use_fully_qualified_names = False
fallback_homedir = /home/%u@%d
access_provider = ad

SAMBA 4.9.5-Debian Конфиг папки не стал вставлять.

testparm -v
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Registered MSG_REQ_POOL_USAGE
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[test]"
Loaded services file OK.
WARNING: socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
This warning is printed because you set one of the
following options: SO_SNDBUF, SO_RCVBUF, SO_SNDLOWAT,
SO_RCVLOWAT
Modern server operating systems are tuned for
high network performance in the majority of situations;
when you set 'socket options' you are overriding those
settings.
Linux in particular has an auto-tuning mechanism for
buffer sizes (SO_SNDBUF, SO_RCVBUF) that will be
disabled if you specify a socket buffer size. This can
potentially cripple your TCP/IP stack.

Getting the 'socket options' correct can make a big
difference to your performance, but getting them wrong
can degrade it by just as much. As with any other low
level setting, if you must make changes to it, make
 small changes and test the effect before making any
large changes.

Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

# Global parameters
[global]
        abort shutdown script =
        add group script =
        add machine script =
        addport command =
        addprinter command =
        add share command =
        add user script =
        add user to group script =
        afs token lifetime = 604800
        afs username map =
        aio max threads = 100
        algorithmic rid base = 1000
        allow dcerpc auth level connect = No
        allow dns updates = secure only
        allow insecure wide links = No
        allow nt4 crypto = No
        allow trusted domains = Yes
        allow unsafe cluster upgrade = No
        apply group policies = No
        async smb echo handler = No
        auth event notification = No
        auto services =
        binddns dir = /var/lib/samba/bind-dns
        bind interfaces only = No
        browse list = Yes
        cache directory = /var/cache/samba
        change notify = Yes
        change share command =
        check password script =
        cldap port = 389
        client ipc max protocol = default
        client ipc min protocol = default
        client ipc signing = default
        client lanman auth = No
        client ldap sasl wrapping = sign
        client max protocol = default
        client min protocol = CORE
        client NTLMv2 auth = Yes
        client plaintext auth = No
        client schannel = Yes
        client signing = default
        client use spnego principal = No
        client use spnego = Yes
        cluster addresses =
        clustering = No
        config backend = file
        config file =
        create krb5 conf = Yes
        ctdbd socket =
        ctdb locktime warn threshold = 0
        ctdb timeout = 0
        cups connection timeout = 30
        cups encrypt = No
        cups server =
        dcerpc endpoint servers = epmapper, wkssvc, rpcecho, samr, netlogon, lsarpc, drsuapi, dssetup, unixinfo, browser, eventlog6, backupkey, dnsserver
        deadtime = 0
        debug class = No
        debug hires timestamp = Yes
        debug pid = No
        debug prefix timestamp = No
        debug uid = No
        dedicated keytab file =
        default service =
        defer sharing violations = Yes
        delete group script =
        deleteprinter command =
        delete share command =
        delete user from group script =
        delete user script =
        dgram port = 138
        disable netbios = No
        disable spoolss = Yes
        dns forwarder =
        dns proxy = No
        dns update command = /usr/sbin/samba_dnsupdate
        dns zone scavenging = No
        domain logons = No
        domain master = Auto
        dos charset = CP850
        dsdb event notification = No
        dsdb group change notification = No
        dsdb password event notification = No
        enable asu support = No
        enable core files = Yes
        enable privileges = Yes
        encrypt passwords = Yes
        enhanced browsing = Yes
        enumports command =
        eventlog list =
        get quota command =
        getwd cache = Yes
        gpo update command = /usr/sbin/samba-gpupdate
        guest account = nobody
        homedir map = auto.home
        host msdfs = Yes
        hostname lookups = No
        idmap backend = tdb
        idmap cache time = 604800
        idmap gid =
        idmap negative cache time = 120
        idmap uid =
        include system krb5 conf = Yes
        init logon delay = 100
        init logon delayed hosts =
        interfaces =
        iprint server =
        keepalive = 300
        kerberos encryption types = all
        kerberos method = default
        kernel change notify = Yes
        kpasswd port = 464
        krb5 port = 88
        lanman auth = No
        large readwrite = Yes
        ldap admin dn =
        ldap connection timeout = 2
        ldap debug level = 0
        ldap debug threshold = 10
        ldap delete dn = No
        ldap deref = auto
        ldap follow referral = Auto
        ldap group suffix =
        ldap idmap suffix =
        ldap machine suffix =
        ldap page size = 1000
        ldap passwd sync = no
        ldap replication sleep = 1000
        ldap server require strong auth = Yes
        ldap ssl = start tls
        ldap ssl ads = No
        ldap suffix =
        ldap timeout = 15
        ldap user suffix =
        lm announce = Auto
        lm interval = 60
        load printers = No
        local master = Yes
        lock directory = /var/run/samba
        lock spin time = 200
        log file = /var/log/samba/log.%m
        logging = syslog
        log level = 2
        log nt token command =
        logon drive =
        logon home = \\%N\%U
        logon path = \\%N\%U\profile
        logon script =
        log writeable files on exit = No
        lpq cache time = 30
        lsa over netlogon = No
        machine password timeout = 604800
        mangle prefix = 1
        mangling method = hash2
        map to guest = Bad User
        max disk size = 0
        max log size = 1000
        max mux = 50
        max open files = 16384
        max smbd processes = 0
        max stat cache size = 256
        max ttl = 259200
        max wins ttl = 518400
        max xmit = 16644
        mdns name = netbios
        message command =
        min receivefile size = 0
        min wins ttl = 21600
        mit kdc command =
        multicast dns register = No
        name cache timeout = 660
        name resolve order = lmhosts wins host bcast
        nbt client socket address = 0.0.0.0
        nbt port = 137
        ncalrpc dir = /var/run/samba/ncalrpc
        netbios aliases =
        netbios name = OMV
        netbios scope =
        neutralize nt4 emulation = No
        NIS homedir = No
        nmbd bind explicit broadcast = Yes
        nsupdate command = /usr/bin/nsupdate -g
        ntlm auth = ntlmv2-only
        nt pipe support = Yes
        ntp signd socket directory = /var/lib/samba/ntp_signd
        nt status support = Yes
        null passwords = No
        obey pam restrictions = Yes
        old password allowed period = 60
        oplock break wait time = 0
        os2 driver map =
        os level = 20
        pam password change = Yes
        panic action = /usr/share/samba/panic-action %d
        passdb backend = tdbsam
        passdb expand explicit = No
        passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
        passwd chat debug = No
        passwd chat timeout = 2
        passwd program = /usr/bin/passwd %u
        password hash gpg key ids =
        password hash userPassword schemes =
        password server = *
        perfcount module =
        pid directory = /var/run/samba
        preferred master = Auto
        prefork children = 1
        preload modules =
        printcap cache time = 750
        printcap name = /dev/null
        private dir = /var/lib/samba/private
        raw NTLMv2 auth = No
        read raw = Yes
        realm =
        registry shares = No
        reject md5 clients = No
        reject md5 servers = No
        remote announce =
        remote browse sync =
        rename user script =
        require strong key = Yes
        reset on zero vc = No
        restrict anonymous = 0
        rndc command = /usr/sbin/rndc
        root directory =
        rpc big endian = No
        rpc server dynamic port range = 49152-65535
        rpc server port = 0
        samba kcc command = /usr/sbin/samba_kcc
        security = AUTO
        server max protocol = SMB3
        server min protocol = LANMAN1
        server multi channel support = No
        server role = auto
        server schannel = Yes
        server services = s3fs, rpc, nbt, wrepl, ldap, cldap, kdc, drepl, winbindd, ntp_signd, kcc, dnsupdate, dns
        server signing = default
        server string = %h server
        set primary group script =
        set quota command =
        share backend = classic
        show add printer wizard = Yes
        shutdown script =
        smb2 leases = Yes
        smb2 max credits = 8192
        smb2 max read = 8388608
        smb2 max trans = 8388608
        smb2 max write = 8388608
        smbd profiling level = off
        smb passwd file = /etc/samba/smbpasswd
        smb ports = 445 139
        socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
        spn update command = /usr/sbin/samba_spnupdate
        stat cache = Yes
        state directory = /var/lib/samba
        svcctl list =
        syslog = 1
        syslog only = No
        template homedir = /home/domain.com/users/%U
        template shell = /bin/bash
        time server = No
        timestamp logs = Yes
        tls cafile = tls/ca.pem
        tls certfile = tls/cert.pem
        tls crlfile =
        tls dh params file =
        tls enabled = Yes
        tls keyfile = tls/key.pem
        tls priority = NORMAL:-VERS-SSL3.0
        tls verify peer = as_strict_as_possible
        unicode = Yes
        unix charset = UTF-8
        unix extensions = Yes
        unix password sync = No
        use mmap = Yes
        username level = 0
        username map =
        username map cache time = 0
        username map script =
        usershare allow guests = No
        usershare max shares = 100
        usershare owner only = Yes
        usershare path = /var/lib/samba/usershares
        usershare prefix allow list =
        usershare prefix deny list =
        usershare template share =
        utmp = No
        utmp directory =
        web port = 901
        winbind cache time = 300
        winbindd socket directory = /var/run/samba/winbindd
        winbind enum groups = No
        winbind enum users = No
        winbind expand groups = 0
        winbind max clients = 200
        winbind max domain connections = 1
        winbind nested groups = Yes
        winbind normalize names = No
        winbind nss info = template
        winbind offline logon = No
        winbind reconnect delay = 30
        winbind refresh tickets = No
        winbind request timeout = 60
        winbind rpc only = No
        winbind scan trusted domains = Yes
        winbind sealed pipes = Yes
        winbind separator = \
        winbind use default domain = No
        wins hook =
        wins proxy = No
        wins server =
        wins support = No
        workgroup = TEST
        write raw = Yes
        wtmp directory =
        fruit:aapl = yes
        idmap config * : backend = tdb
        access based share enum = No
        acl allow execute always = No
        acl check permissions = Yes
        acl group control = No
        acl map full control = Yes
        administrative share = No
        admin users =
        afs share = No
        aio read size = 16384
        aio write behind =
        aio write size = 16384
        allocation roundup size = 1048576
        available = Yes
        blocking locks = Yes
        block size = 1024
        browseable = Yes
        case sensitive = Auto
        check parent directory delete on close = No
        comment =
        copy =
        create mask = 0777
        csc policy = manual
        cups options =
        default case = lower
        default devmode = Yes
        delete readonly = No
        delete veto files = No
        dfree cache time = 0
        dfree command =
        directory mask = 0777
        directory name cache size = 100
        dmapi support = No
        dont descend =
        dos filemode = No
        dos filetime resolution = No
        dos filetimes = Yes
        durable handles = Yes
        ea support = Yes
        fake directory create times = No
        fake oplocks = No
        follow symlinks = Yes
        force create mode = 0000
        force directory mode = 0000
        force group =
        force printername = No
        force unknown acl user = No
        force user =
        fstype = NTFS
        guest ok = No
        guest only = No
        hide dot files = Yes
        hide files =
        hide special files = No
        hide unreadable = No
        hide unwriteable files = No
        hosts allow =
        hosts deny =
        include =
        inherit acls = No
        inherit owner = no
        inherit permissions = No
        invalid users =
        kernel oplocks = No
        kernel share modes = Yes
        level2 oplocks = Yes
        locking = Yes
        lppause command =
        lpq command = %p
        lpresume command =
        lprm command =
        magic output =
        magic script =
        mangled names = yes
        mangling char = ~
        map acl inherit = No
        map archive = Yes
        map hidden = No
        map readonly = no
        map system = No
        max connections = 0
        max print jobs = 1000
        max reported print jobs = 0
        min print space = 0
        msdfs proxy =
        msdfs root = No
        msdfs shuffle referrals = No
        nt acl support = Yes
        ntvfs handler = unixuid, default
        oplocks = Yes
        path =
        posix locking = Yes
        postexec =
        preexec =
        preexec close = No
        preserve case = Yes
        printable = No
        print command =
        printer name =
        printing = bsd
        printjob username = %U
        print notify backchannel = No
        queuepause command =
        queueresume command =
        read list =
        read only = Yes
        root postexec =
        root preexec =
        root preexec close = No
        short preserve case = Yes
        smb encrypt = default
        spotlight = No
        store dos attributes = Yes
        strict allocate = No
        strict locking = Auto
        strict rename = No
        strict sync = Yes
        sync always = No
        use client driver = No
        use sendfile = Yes
        valid users =
        veto files =
        veto oplock files =
        vfs objects =
        volume =
        wide links = No
        write cache size = 0
        write list =

nsswitch

cat /etc/nsswitch.conf
# /etc/nsswitch.conf
#
# Example configuration of GNU Name Service Switch functionality.
# If you have the `glibc-doc-reference' and `info' packages installed, try:
# `info libc "Name Service Switch"' for information about this file.

passwd:         files systemd sss
group:          files systemd sss
shadow:         files sss
gshadow:        files

hosts:          files mdns4_minimal [NOTFOUND=return] dns myhostname
networks:       files

protocols:      db files
services:       db files sss
ethers:         db files
rpc:            db files

netgroup:       nis sss

Заработало

Появились пользователи в списке, правда как системные. Пока тему оставлю, буду не против дельных советов и ссылок.

Stazot ()

А просто «getent passwd» (без указания имени пользовователя) показывает AD-шных пользователей или только локальных?

Если только локальных, то тебе наверное надо «enumerate = true» добавить в sssd.conf.

Еще в твоем мануале написано поменять UID_MAX и GID_MAX, чтобы в них попадали доменные пользоватлеи. Проделал это?

bigbit ★★★★★ ()
Ответ на: комментарий от bigbit

А просто «getent passwd» (без указания имени пользовователя) показывает AD-шных пользователей

Да показывает.

Если только локальных, то тебе наверное надо «enumerate = true» добавить в sssd.conf.

Прописано.

Еще в твоем мануале написано поменять UID_MAX и GID_MAX, чтобы в них попадали доменные пользоватлеи. Проделал это?

Я думаю 60 000 достаточно, учитывая что мааксимум 30 пользователей в домене

В принципе пользователи появились, но теперь авторизация не проходит почему то. В Виндовс ввожу данные учетки AD, пишет мол, не верная учетка.

Stazot ()
Последнее исправление: Stazot (всего исправлений: 1)
Ответ на: комментарий от bigbit

Еще одна проблема, не знаю связано или нет, но скорее связано… Не проходит авторизация с Виндовс машин. Других в сети нет что бы проверить. Ошибка

Нет доступа к бла-бла-бла, возможно у вас нет прав на использование этого ресурса ...

Если в самой самбе разрешить гостей то норм, авторизация типа проходит, но если нет доступа к папке то снова выдаёт окно что авторизация мол не пройдена.

сейчас выяснил что он перешёл в режим Standalone

Stazot ()
Последнее исправление: Stazot (всего исправлений: 1)
Ответ на: комментарий от Stazot

Я думаю 60 000 достаточно, учитывая что мааксимум 30 пользователей в домене

Это не максимальное количество пользователей. Это максимальные uid и gid. У того же vasya у тебя uid=635601109, что немного больше, чем 60000.

авторизация не проходит почему то

Если что-то не работает, то надо смотреть логи.

сейчас выяснил что он перешёл в режим Standalone

Судя по выхлопу в первом посте, он у тебя и был в standalone.
security=ads, не?

bigbit ★★★★★ ()
Последнее исправление: bigbit (всего исправлений: 1)
Ответ на: комментарий от bigbit

Судя по выхлопу в первом посте, он у тебя и был в standalone. security=ads, не?

Устанавливал этот параметр. До этого тоже был. но видимо удалил при решении других проблем лишнюю строчку, в OMV вписывать приходится. Вот такая ошибка вылетает, если конфиг самбы дополнять из инструкции.

 Invalid idmap range for domain *!
Stazot ()
Ответ на: комментарий от Stazot

В общем сделал через winbind, всё нормально заработало. Сейчас прод серв настрою, потом будет время поиграюсь с sss, Спасибо всем

Stazot ()
Ограничение на отправку комментариев: только для зарегистрированных пользователей