PulseAudio не видит наушники
Несколько дней назад после перезагрузки внезапно отвалился звук. При подключении или отключении наушников PA не видит/продолжает видеть наушники (подключённые через mini-jack на передней панели).
Перезагрузка (с подключёнными наушниками) и pulseaudio -k исправляют ситуацию до следующего подключения/отключения. Нормального решения я не нашёл.
Проблема не связана с наушниками или разъёмом, конфиги не менял, звуковая карта и контроллер определяются нормально:
$ lspci | grep Audio
22:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
24:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller
Пробовал добавлять и менять последовательность загрузки модулей - безрезультатно, вернул дефолтный конфиг.
$ pacmd list-modules
22 module(s) loaded.
index: 0
name: <module-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "14.0"
index: 1
name: <module-stream-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "14.0"
index: 2
name: <module-card-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "14.0"
index: 3
name: <module-augment-properties>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "14.0"
index: 4
name: <module-switch-on-port-available>
argument: <>
used: -1
load once: yes
properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are plugged/unplugged"
module.version = "14.0"
index: 5
name: <module-udev-detect>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "14.0"
index: 6
name: <module-alsa-card>
argument: <device_id="0" name="pci-0000_22_00.1" card_name="alsa_card.pci-0000_22_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1">
used: 0
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "14.0"
index: 7
name: <module-alsa-card>
argument: <device_id="1" name="pci-0000_24_00.3" card_name="alsa_card.pci-0000_24_00.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1">
used: 1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "14.0"
index: 8
name: <module-dbus-protocol>
argument: <>
used: -1
load once: yes
properties:
module.author = "Tanu Kaskinen"
module.description = "D-Bus interface"
module.version = "14.0"
index: 9
name: <module-native-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "14.0"
index: 10
name: <module-gsettings>
argument: <>
used: -1
load once: yes
properties:
module.author = "Sylvain Baubeau"
module.description = "GSettings Adapter"
module.version = "14.0"
index: 11
name: <module-default-device-restore>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "14.0"
index: 12
name: <module-always-sink>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Всегда оставлять хотя бы один аудиоприёмник загруженным, даже если он пустой."
module.version = "14.0"
index: 13
name: <module-intended-roles>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "14.0"
index: 14
name: <module-suspend-on-idle>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "14.0"
index: 15
name: <module-console-kit>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit session of this user"
module.version = "14.0"
index: 16
name: <module-systemd-login>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "14.0"
index: 17
name: <module-position-event-sounds>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "14.0"
index: 18
name: <module-role-cork>
argument: <>
used: -1
load once: yes
properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "14.0"
index: 19
name: <module-filter-heuristics>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "14.0"
index: 20
name: <module-filter-apply>
argument: <>
used: -1
load once: yes
properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "14.0"
index: 21
name: <module-cli-protocol-unix>
argument: <>
used: -1
load once: no
properties:
module.author = "Lennart Poettering"
module.description = "Command line interface protocol (UNIX sockets)"
module.version = "14.0"
Так наушники определяются после перезапуска:
$ pacmd list-sinks
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_24_00.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
state: RUNNING
suspend cause: (none)
priority: 9039
volume: front-left: 13099 / 20% / -41,95 dB, front-right: 13099 / 20% / -41,95 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 100,13 ms
max request: 17 KiB
max rewind: 17 KiB
monitor source: 0
sample spec: s16le 2-канальный 4410
channel map: front-left,front-right
Стерео
used by: 1
linked by: 1
fixed latency: 100,14 ms
card: 1 <alsa_card.pci-0000_24_00.3>
module: 7
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC892 Analog"
alsa.id = "ALC892 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfe800000 irq 53"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:24:00.3"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:24:00.3/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "1457"
device.product.name = "Family 17h (Models 00h-0fh) HD Audio Controller"
device.string = "front:1"
device.buffering.buffer_size = "17664"
device.buffering.fragment_size = "2944"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Аналоговый стерео"
device.description = "Family 17h (Models 00h-0fh) HD Audio Controller Аналоговый стерео"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: no)
properties:
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-headphones>