а вы знали что есть man.config ?

Для Ъ, что там?

Kosyak ★★★★
(23.04.12 14:41:41 MSK)

Ответ на: комментарий от Kosyak 23.04.12 14:41:41 MSK

Для Ъ, что там?

Новый замечательный факт из жизни Ъ. Они не читают даже маны!

Sadler ★★★
(23.04.12 14:44:49 MSK)

чё-то такое слышал когда LFS собирал :)

true_admin ★★★★★
(23.04.12 14:45:02 MSK)

Ссылка

Ответ на: комментарий от Sadler 23.04.12 14:44:49 MSK

Изменение поведения memcpy в glibc привело к странным ошибкам (комментарий)

как выяснилось, авторы многих проектов документацию не читали.
но хотя бы осуждают?

ymuv ★★★★
(23.04.12 14:48:48 MSK)

Ссылка

Ответ на: комментарий от Kosyak 23.04.12 14:41:41 MSK

# This file is read by man to configure the default manpath (also used
# when MANPATH contains an empty substring), to find out where the cat
# pages corresponding to given man pages should be stored,
# and to map each PATH element to a manpath element.

dada ★★★★★
(23.04.12 14:52:15 MSK) автор топика

Ответ на: комментарий от Sadler 23.04.12 14:44:49 MSK

Их курят же.

Kosyak ★★★★
(23.04.12 14:52:18 MSK)

Ссылка

в моей системе нет man.config

ass ★★★★
(23.04.12 15:07:11 MSK)

Ответ на: комментарий от ass 23.04.12 15:07:11 MSK

Хорошенько посмотри в Application Data.

muon ★★★★★
(23.04.12 15:16:44 MSK)

Ответ на: комментарий от Sadler 23.04.12 14:44:49 MSK

Новый замечательный факт из жизни Ъ. Они не читают даже маны!

Ъ маны пишут, стыдно не знать.

mopsene ★★★
(23.04.12 15:34:14 MSK)

Ссылка

Ответ на: комментарий от muon 23.04.12 15:16:44 MSK

в нормальных дистрах это /etc/manpath.config ^)

true_admin ★★★★★
(23.04.12 15:40:02 MSK)

Ответ на: комментарий от Kosyak 23.04.12 14:41:41 MSK

Для Ъ, что там?

$ man.config
bash: man.config: команда не найдена

Фиг его знает что имел в виду афтар.

Xintrea ★★★★★
(23.04.12 15:50:01 MSK)

Ответ на: комментарий от true_admin 23.04.12 15:40:02 MSK

dmitry@stevie:~$ ls /etc/manpath.config
/etc/manpath.config

Моя убунта - нормальный дистр. Скажите, это точно ЛОР?

muon ★★★★★
(23.04.12 15:58:18 MSK)

в слаке почему-то аж /usr/lib/man.conf

Komintern ★★★★★
(23.04.12 16:01:05 MSK)

Ссылка

Ответ на: комментарий от muon 23.04.12 15:16:44 MSK

у меня не убунта, есичо.

ass ★★★★
(23.04.12 16:05:00 MSK)

Ссылка

Ответ на: комментарий от muon 23.04.12 15:58:18 MSK

это точно ЛОР?

это был вброс :)

true_admin ★★★★★
(23.04.12 16:07:41 MSK)

Ответ на: комментарий от Xintrea 23.04.12 15:50:01 MSK

вы издеваетесь ? nano /etc/man.config

dada ★★★★★
(23.04.12 16:08:58 MSK) автор топика

Ответ на: комментарий от true_admin 23.04.12 16:07:41 MSK

вброс вот это:

Моя убунта - нормальный дистр.

dada ★★★★★
(23.04.12 16:09:55 MSK) автор топика

Ссылка

нет, его нет
есть только /etc/man.conf

megabaks ★★★★
(23.04.12 16:14:00 MSK)

Ответ на: комментарий от dada 23.04.12 14:52:15 MSK

опять ответ неверный

смотри внимательно[code=bash]#
# Generated automatically from man.conf.in by the
# configure script.
#
# man.conf from man-1.6g
#
# For more information about this file, see the man pages man(1)
# and man.conf(5).
#
# This file is read by man to configure the default manpath (also used
# when MANPATH contains an empty substring), to find out where the cat
# pages corresponding to given man pages should be stored,
# and to map each PATH element to a manpath element.
# It may also record the pathname of the man binary. [This is unused.]
# The format is:
#
# MANBIN pathname
# MANPATH manpath_element [corresponding_catdir]
# MANPATH_MAP path_element manpath_element
#
# If no catdir is given, it is assumed to be equal to the mandir
# (so that this dir has both man1 etc. and cat1 etc. subdirs).
# This is the traditional Unix setup.
# Certain versions of the FSSTND recommend putting formatted versions
# of /usr/.../man/manx/page.x into /var/catman/.../catx/page.x.
# The keyword FSSTND will cause this behaviour.
# Certain versions of the FHS recommend putting formatted versions of
# /usr/.../share/man/[locale/]manx/page.x into
# /var/cache/man/.../[locale/]catx/page.x.
# The keyword FHS will cause this behaviour (and overrides FSSTND).
# Explicitly given catdirs override.
#
# FSSTND
FHS
#
# This file is also read by man in order to find how to call nroff, less, etc.,
# and to determine the correspondence between extensions and decompressors.
#
# MANBIN /usr/local/bin/man
#
# Every automatically generated MANPATH includes these fields
#
MANPATH /usr/man
MANPATH /usr/share/man
MANPATH /usr/local/man
MANPATH /usr/local/share/man
MANPATH /usr/X11R6/man
#
# Uncomment if you want to include one of these by default
#
# MANPATH /opt/*/man
# MANPATH /usr/lib/*/man
# MANPATH /usr/share/*/man
# MANPATH /usr/kerberos/man
#
# Set up PATH to MANPATH mapping
#
# If people ask for «man foo» and have «/dir/bin/foo» in their PATH
# and the docs are found in «/dir/man», then no mapping is required.
#
# The below mappings are superfluous when the right hand side is
# in the mandatory manpath already, but will keep man from statting
# lots of other nearby files and directories.
#
MANPATH_MAP /bin /usr/share/man
MANPATH_MAP /sbin /usr/share/man
MANPATH_MAP /usr/bin /usr/share/man
MANPATH_MAP /usr/sbin /usr/share/man
MANPATH_MAP /usr/local/bin /usr/local/share/man
MANPATH_MAP /usr/local/sbin /usr/local/share/man
MANPATH_MAP /usr/X11R6/bin /usr/X11R6/man
MANPATH_MAP /usr/bin/X11 /usr/X11R6/man
MANPATH_MAP /usr/bin/mh /usr/share/man
#
# NOAUTOPATH keeps man from automatically adding directories that look like
# manual page directories to the path.
#
#NOAUTOPATH
#
# NOCACHE keeps man from creating cache pages («cat pages»)
# (generally one enables/disable cat page creation by creating/deleting
# the directory they would live in - man never does mkdir)
#
#NOCACHE
#
# Useful paths - note that COL should not be defined when
# NROFF is defined as «groff -Tascii» or «groff -Tlatin1»;
# not only is it superfluous, but it actually damages the output.
# For use with utf-8, NROFF should be «nroff -mandoc» without -T option.
# (Maybe - but today I need -Tlatin1 to prevent double conversion to utf8.)
#
# If you have a new troff (version 1.18.1?) and its colored output
# causes problems, add the -c option to TROFF, NROFF, JNROFF.
#
TROFF /usr/bin/groff -Tps -mandoc
NROFF /usr/bin/nroff -mandoc
JNROFF /usr/bin/groff -Tnippon -mandocj
EQN /usr/bin/geqn -Tps
NEQN /usr/bin/geqn -Tlatin1
JNEQN /usr/bin/geqn -Tnippon
TBL /usr/bin/gtbl
# COL /usr/bin/col
REFER /usr/bin/refer
PIC /usr/bin/pic
VGRIND
GRAP
PAGER /usr/bin/less -isR
BROWSER /usr/bin/less -isR
HTMLPAGER /bin/cat
CAT /bin/cat
#
# The command «man -a xyzzy» will show all man pages for xyzzy.
# When CMP is defined man will try to avoid showing the same
# text twice. (But compressed pages compare unequal.)
#
CMP /usr/bin/cmp -s
#
# Compress cat pages
#
COMPRESS /usr/bin/xz
COMPRESS_EXT .xz
#
# Default manual sections (and order) to search if -S is not specified
# and the MANSECT environment variable is not set.
#
MANSECT 1:1p:8:2:3:3p:4:5:6:7:9:0p:tcl:n:l:p:o
#
# Default options to use when man is invoked without options
# This is mainly for the benefit of those that think -a should be the default
# Note that some systems have /usr/man/allman, causing pages to be shown twice.
#
#MANDEFOPTIONS -a
#
# Decompress with given decompressor when input file has given extension
# The command given must act as a filter.
#
.gz /bin/gunzip -c
.bz2 /bin/bzip2 -c -d
.lzma /usr/bin/unlzma -c -d
.z
.Z /bin/zcat
.F
.Y
.xz /usr/bin/unxz -c[/code]

megabaks ★★★★
(23.04.12 16:17:59 MSK)

Ответ на: комментарий от megabaks 23.04.12 16:17:59 MSK

чо за *?
зачем сломали код?

megabaks ★★★★
(23.04.12 16:18:18 MSK)

Ответ на: комментарий от megabaks 23.04.12 16:18:18 MSK

чо за *?

предпросмотром уже пользоваться немодно? :)

true_admin ★★★★★
(23.04.12 16:20:40 MSK)

Ответ на: комментарий от true_admin 23.04.12 16:20:40 MSK

забавный ты - предпросмотр работает же
а вот при постинге хером по лбу
достали ****, * заниматься!

megabaks ★★★★
(23.04.12 16:21:55 MSK)

Ответ на: комментарий от megabaks 23.04.12 16:21:55 MSK

опять ответ неверный

смотри внимательно

#
# Generated automatically from man.conf.in by the
# configure script.
#
# man.conf from man-1.6g
#
# For more information about this file, see the man pages man(1)
# and man.conf(5).
#
# This file is read by man to configure the default manpath (also used
# when MANPATH contains an empty substring), to find out where the cat
# pages corresponding to given man pages should be stored,
# and to map each PATH element to a manpath element.
# It may also record the pathname of the man binary. [This is unused.]
# The format is:
#
# MANBIN pathname
# MANPATH manpath_element [corresponding_catdir]
# MANPATH_MAP path_element manpath_element
#
# If no catdir is given, it is assumed to be equal to the mandir
# (so that this dir has both man1 etc. and cat1 etc. subdirs).
# This is the traditional Unix setup.
# Certain versions of the FSSTND recommend putting formatted versions
# of /usr/.../man/manx/page.x into /var/catman/.../catx/page.x.
# The keyword FSSTND will cause this behaviour.
# Certain versions of the FHS recommend putting formatted versions of
# /usr/.../share/man/[locale/]manx/page.x into
# /var/cache/man/.../[locale/]catx/page.x.
# The keyword FHS will cause this behaviour (and overrides FSSTND).
# Explicitly given catdirs override.
#
# FSSTND
FHS
#
# This file is also read by man in order to find how to call nroff, less, etc.,
# and to determine the correspondence between extensions and decompressors.
#
# MANBIN /usr/local/bin/man
#
# Every automatically generated MANPATH includes these fields
#
MANPATH /usr/man
MANPATH /usr/share/man
MANPATH /usr/local/man
MANPATH /usr/local/share/man
MANPATH /usr/X11R6/man
#
# Uncomment if you want to include one of these by default
#
# MANPATH /opt/*/man
# MANPATH /usr/lib/*/man
# MANPATH /usr/share/*/man
# MANPATH /usr/kerberos/man
#
# Set up PATH to MANPATH mapping
#
# If people ask for "man foo" and have "/dir/bin/foo" in their PATH
# and the docs are found in "/dir/man", then no mapping is required.
#
# The below mappings are superfluous when the right hand side is
# in the mandatory manpath already, but will keep man from statting
# lots of other nearby files and directories.
#
MANPATH_MAP /bin /usr/share/man
MANPATH_MAP /sbin /usr/share/man
MANPATH_MAP /usr/bin /usr/share/man
MANPATH_MAP /usr/sbin /usr/share/man
MANPATH_MAP /usr/local/bin /usr/local/share/man
MANPATH_MAP /usr/local/sbin /usr/local/share/man
MANPATH_MAP /usr/X11R6/bin /usr/X11R6/man
MANPATH_MAP /usr/bin/X11 /usr/X11R6/man
MANPATH_MAP /usr/bin/mh /usr/share/man
#
# NOAUTOPATH keeps man from automatically adding directories that look like
# manual page directories to the path.
#
#NOAUTOPATH
#
# NOCACHE keeps man from creating cache pages ("cat pages")
# (generally one enables/disable cat page creation by creating/deleting
# the directory they would live in - man never does mkdir)
#
#NOCACHE
#
# Useful paths - note that COL should not be defined when
# NROFF is defined as "groff -Tascii" or "groff -Tlatin1";
# not only is it superfluous, but it actually damages the output.
# For use with utf-8, NROFF should be "nroff -mandoc" without -T option.
# (Maybe - but today I need -Tlatin1 to prevent double conversion to utf8.)
#
# If you have a new troff (version 1.18.1?) and its colored output
# causes problems, add the -c option to TROFF, NROFF, JNROFF.
#
TROFF /usr/bin/groff -Tps -mandoc
NROFF /usr/bin/nroff -mandoc
JNROFF /usr/bin/groff -Tnippon -mandocj
EQN /usr/bin/geqn -Tps
NEQN /usr/bin/geqn -Tlatin1
JNEQN /usr/bin/geqn -Tnippon
TBL /usr/bin/gtbl
# COL /usr/bin/col
REFER /usr/bin/refer
PIC /usr/bin/pic
VGRIND
GRAP
PAGER /usr/bin/less -isR
BROWSER /usr/bin/less -isR
HTMLPAGER /bin/cat
CAT /bin/cat
#
# The command "man -a xyzzy" will show all man pages for xyzzy.
# When CMP is defined man will try to avoid showing the same
# text twice. (But compressed pages compare unequal.)
#
CMP /usr/bin/cmp -s
#
# Compress cat pages
#
COMPRESS /usr/bin/xz
COMPRESS_EXT .xz
#
# Default manual sections (and order) to search if -S is not specified
# and the MANSECT environment variable is not set.
#
MANSECT 1:1p:8:2:3:3p:4:5:6:7:9:0p:tcl:n:l:p:o
#
# Default options to use when man is invoked without options
# This is mainly for the benefit of those that think -a should be the default
# Note that some systems have /usr/man/allman, causing pages to be shown twice.
#
#MANDEFOPTIONS -a
#
# Decompress with given decompressor when input file has given extension
# The command given must act as a filter.
#
.gz /bin/gunzip -c
.bz2 /bin/bzip2 -c -d
.lzma /usr/bin/unlzma -c -d
.z
.Z /bin/zcat
.F
.Y
.xz /usr/bin/unxz -c

true_admin ★★★★★
(23.04.12 16:23:36 MSK)

Ссылка

Ответ на: комментарий от megabaks 23.04.12 16:21:55 MSK

у мну пашет. я тока переносы перед/после тегов поставил. Всегда так делаю :)

true_admin ★★★★★
(23.04.12 16:24:10 MSK)

А ещё существует более одной реализации man.

Deleted
(23.04.12 16:25:26 MSK)

Ответ на: комментарий от true_admin 23.04.12 16:24:10 MSK

переносы?
это что за высер новомодный?
опять максу вожжа под хвост попала?
нахера вообще было убирать то, что просто работает?
[censored], [censored], [censored]!

megabaks ★★★★
(23.04.12 16:31:00 MSK)