Наткнулся на заметку в одном интернет-автомагазине. Там говорилось о машине, которая по мощности обходит многие суперкары, а продаётся по смешной для этой тачки цене в 16000 фунтов.
MIG welded round and square tube spaceframe chassis, Fully bracketed to accept Chevrolet V8 engine and Porsche transaxle, steering, fuel tanks, seat belts, pedals, radiator, handbrake, gear linkage and brake servo mountings. All powder coated in black satin finish.
Alloy panel kit in NS4 16swg aluminium sheet polythene coated both sides for cockpit floor, sides and bulkheads, pre-cut and bent including bonding adhesive, pop rivets and skin pins.
Lightweight fabricated TIG welded brake, clutch and throttle pedal set, with adjustable foot pads. Including all bearings fixing bolts nuts and washers.
Brake and clutch master cylinders, remote fluid reservoir with float level, adjustable brake bias bar, clutch clevis with all fixing nuts and washers.
TIG welded wishbone set with urethane bushes and plated fixing nuts bolts and washers.
Front suspension upper and lower ball joints.
Rear uprights in LM25 heat treated alloy, fully machined to accept Ford manufactured hubs, bearings and brakes. Including all plated fixing bolts, nuts and washers.
Rear toe in adjusters including rose joints and fixing bolts.
Front uprights in LM25 heat treated alloy, fully machined to accept Ford manufactured hubs, bearings and brakes. Including steel steering arms.
Front set of wheel hubs, wheel bearings, oil seals, dust caps, hub nuts, washers and long wheel studs.
Rear set ditto.
Front set of 260mm vented disc brakes, callipers and pads. (see accessories for other options)
Rear set of 260mm solid disc brakes, callipers and pads. (see accessories for other options)
Handbrake lever, fixing bolts and pair of cables.
Brake line kit in stainless steel pressure tested flexible pipe with all fixing clips, washers and brake light switch.
Steering column complete with universal joints, bearings and fixing bolts.
Sports alloy steering rack with 2.5 turns lock to lock complete with track rods, track rod ends, alloy mounting clamps, fixing bolts and rack boot kit.
Front mounted radiator and cooling kit comprising of five row radiator, preformed alloy water pipes, twin fans with water temperature sensor thermostat, alloy expansion tank, alloy swirl pot and all fixing brackets.
G50 gear linkage in 20mm CDS including all needle roller universal joints and chassis fixing rose joints. All plated. Gear lever 1/2" rod.
Foam filled alloy petrol tank with - 6 fittings, fixing kit, tube type fuel gauge sender unit, aircraft type external flush filler cap, alloy mounting, filler hose and clips. 40 litre capacity.
Set of standard front and rear dampers with height and bump adjustment. Coil spring poundage to suit proposed finished weight of car including all fixing nuts bolts and washers.
Drive shaft pair with lobro universal joints and fixing bolts Purpose made from high grade steel.
Wiring loom complete with fuse box, relay sockets and multi connectors for separate front and rear looms.
GTR bodywork in GRP with Isophthalic high heat distortion resin comprising front and rear sections, side pods, cockpit, doors, dashboard, headlight and instrument pods. All in coloured gelcoat.
Front and rear body hinges, door locks, door hinges, gas struts, body securing latches and releases.
GTR laminated glass windscreen, polycarbonate sidescreens, GTR perspex headlight covers.
Я тут подумал, а почему бы не скинуться всем ЛОРом, собрать её, покрасить в сиреневый цвет, нацепить логотип Gentoo и разъезжать по городам, предлагая диски с гентой?