LINUX.ORG.RU

ASPLinux 11.2 проблема SATA на VT82C586A


0

0

Недавно скачал дистриб ASPLinux 11.2 (впервые ставлю линукс).
Не работает SATA диск! Материнка P5V-VM-DH ...
Изъеживался-ижъеживался, прям не знаю что делать ... Кто сталкивался или знает как исправить помогите пожалуйста ...

dmesg :

VP_IDE: IDE controller at PCI slot 0000:00:0f.1
PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0
VP_IDE: chipset revision 7
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: Unknown VIA SouthBridge, disabling DMA.
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 7
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: Unknown VIA SouthBridge, disabling DMA.
Probing IDE interface ide0...
hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
........
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xF880C100 ctl 0x0 bmdma 0x0 irq 11
........
usb-storage: device scan complete
ata1: SATA link down (SStatus 0)
scsi1 : ahci
ata2: SATA link down (SStatus 0)
scsi2 : ahci

lspci :

00:00.0 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. P4M890 Security Device
00:00.7 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:03.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:0f.0 IDE interface: VIA Technologies, Inc. Unknown device 5337 (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8237A PCI to PCI Bridge
02:00.0 VGA compatible controller: ATI Technologies Inc RV530 [Radeon X1600]
02:00.1 Display controller: ATI Technologies Inc RV530 [Radeon X1600] (Secondary)
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02)
04:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
04:04.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
80:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller (rev 10)


Ответ на: Re: ASPLinux 11.2 проблема SATA на VT82C586A от birdie

Re: ASPLinux 11.2 проблема SATA на VT82C586A

И так и сяк пробовал ...
Убил SATA в биосе ... повесил винт на JMicron ...
Пробовал в режиме AHCI и в IDE ... одна малина получил такое :

dmesg :

ata1: SATA max UDMA/133 cmd 0xF880C100 ctl 0x0 bmdma 0x0 irq 11
ata2: SATA max UDMA/133 cmd 0xF880C180 ctl 0x0 bmdma 0x0 irq 11
ata1: SATA link down (SStatus 0)
scsi1 : ahci
ata2: SATA link up 1.5 Gbps (SStatus 113)
Vendor: Generic Model: USB SD Reader Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 00
sd 0:0:0:0: Attached scsi removable disk sda
Vendor: Generic Model: USB CF Reader Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 00
sd 0:0:0:1: Attached scsi removable disk sdb
Vendor: Generic Model: USB SM Reader Rev: 1.02
Type: Direct-Access ANSI SCSI revision: 00
sd 0:0:0:2: Attached scsi removable disk sdc
Vendor: Generic Model: USB MS Reader Rev: 1.03
Type: Direct-Access ANSI SCSI revision: 00
sd 0:0:0:3: Attached scsi removable disk sdd
usb-storage: device scan complete
ata2: qc timeout (cmd 0xec)
ata2: dev 0 failed to IDENTIFY (I/O error)
scsi2 : ahci

lspci -v :

03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller (rev 02) (prog-if 01 [AHCI 1.0](при IDE mode типа : master primary и т.п.))
Subsystem: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller
Flags: bus master, fast devsel, latency 0, IRQ 11
I/O ports at dc00 [size=8]
I/O ports at d800 [size=4]
I/O ports at d400 [size=8]
I/O ports at d000 [size=4]
I/O ports at cc00 [size=16]
Memory at dfefe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at dfee0000 [disabled] [size=64K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint IRQ 1

Хотелось бы разобраться.
Может быть есть еще идеи?

bang ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.