LINUX.ORG.RU

Фулскрин с Intel GMA 945

 , , , ,


1

1

Имеется старый ноутбук Acer Aspire 3682WXC со встроенным видео Intel GMA 945. Сейчас на нём крутится crunchbang с репами debian testing. При запуске игрушек во весь экран (пробовал DukeNukem через dosbox и heroes3 через wine) с разрешением отличным от дефолтного, изображение улетает в левый верхний угол.

Прилагаю lspci -k

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
	Subsystem: Acer Incorporated [ALI] Device 0110
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
	Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
	Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
	Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
	Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: lpc_ich
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
	Subsystem: Acer Incorporated [ALI] Device 0110
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14)
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: sky2
0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
	Subsystem: Acer Incorporated [ALI] Device 0110
	Kernel driver in use: yenta_cardbus
0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Re

xrandr -q

Screen 0: minimum 320 x 200, current 1280 x 800, maximum 4096 x 4096
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 304mm x 190mm
   1280x800       60.0*+
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
TV1 disconnected (normal left inverted right x axis y axis)


[code]
Setting scaling mode
This can be useful for some full screen applications:
$ xrandr --output LVDS1 --set PANEL_FITTING param
where param can be:
center: resolution will be kept exactly as defined, no scaling will be made,
full: scale the resolution so it uses the entire screen or
full_aspect: scale the resolution to the maximum possible but keep the aspect ratio.
If it does not work, try:
$ xrandr --output LVDS1 --set «scaling mode» param
where param is one of «Full», «Center» or «Full aspect».
[code]

int13h ★★★★★
()
Ответ на: комментарий от int13h

Уже все три пробовал. С Full_aspect разрешение так же не меняется. Картинка в левом верхнем угле, по краям справа и снизу цвета с её границ.

BIOlan
() автор топика
Ответ на: комментарий от int13h

Пробую через

xinit wine heroes3.exe
выдает
Fatal server error:
Server is already active for display 0
И ещё, пытаюсь сменить разрешение через
xrandr -s 800x600
Менять не хочет. Просто уменьшает оболочку openbox с синим фоном

BIOlan
() автор топика
Ответ на: комментарий от int13h

cdrom floppy sudo audio dip video plugdev fuse scanner bluetooth netdev cbnetwork

BIOlan
() автор топика
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.