Имеется ноут acer e1 571g с федорой
$ uname -r
3.8.5-201.fc18.x86_64smartctl 5.43 2012-06-30 r3573 [i686-linux-3.5.0-17-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MK..65GSX
Device Model:     TOSHIBA MK6465GSX
Serial Number:    Z9N1B139B
LU WWN Device Id: 5 000039 239182dca
Firmware Version: GJ003A
User Capacity:    640 135 028 736 bytes [640 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Apr  9 14:54:29 2013 FET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (  37)	The self-test routine was interrupted
					by the host with a hard or soft reset.
Total time to complete Offline 
data collection: 		(  120) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 198) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   089   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       2177
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       1695
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   064   064   000    Old_age   Always       -       14644
 10 Spin_Retry_Count        0x0033   133   100   030    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       1576
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       63
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       155
193 Load_Cycle_Count        0x0032   098   098   000    Old_age   Always       -       27589
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       43 (Min/Max 14/55)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       43
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       8246
222 Loaded_Hours            0x0032   070   070   000    Old_age   Always       -       12179
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       295
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0
SMART Error Log Version: 1
ATA Error Count: 45913 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 45913 occurred at disk power-on lifetime: 14644 hours (610 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 02 7f 85 67 61  Error: UNC at LBA = 0x0167857f = 23561599
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 78 85 67 40 00      01:35:44.429  READ FPDMA QUEUED
  e5 00 00 00 00 00 00 00      01:35:44.359  CHECK POWER MODE
  60 00 08 00 1c 82 40 00      01:35:44.333  READ FPDMA QUEUED
  60 80 00 00 d6 b9 40 00      01:35:44.333  READ FPDMA QUEUED
  b0 d5 01 00 4f c2 00 00      01:35:44.332  SMART READ LOG
Error 45912 occurred at disk power-on lifetime: 14644 hours (610 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 02 7f 85 67 61  Error: WP at LBA = 0x0167857f = 23561599
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 08 00 1c 82 40 00      01:35:40.299  WRITE FPDMA QUEUED
  60 08 00 78 85 67 40 00      01:35:40.299  READ FPDMA QUEUED
  e5 00 00 00 00 00 00 00      01:35:40.282  CHECK POWER MODE
  61 80 00 00 d6 b9 40 00      01:35:40.282  WRITE FPDMA QUEUED
  b0 da 00 00 4f c2 00 00      01:35:40.070  SMART RETURN STATUS
Error 45911 occurred at disk power-on lifetime: 14644 hours (610 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 12 7f 85 67 61  Error: UNC at LBA = 0x0167857f = 23561599
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 10 78 85 67 40 00      01:35:36.027  READ FPDMA QUEUED
  60 00 08 00 1c 82 40 00      01:35:36.027  READ FPDMA QUEUED
  60 80 00 00 d6 b9 40 00      01:35:36.027  READ FPDMA QUEUED
  b0 d1 01 01 4f c2 00 00      01:35:35.998  SMART READ ATTRIBUTE THRESHOLDS [OBS-4]
  ef 10 02 00 00 00 a0 00      01:35:35.998  SET FEATURES [Reserved for Serial ATA]
Error 45910 occurred at disk power-on lifetime: 14644 hours (610 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 02 7f 85 67 61  Error: WP at LBA = 0x0167857f = 23561599
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  61 00 10 00 1a 82 40 00      01:35:31.965  WRITE FPDMA QUEUED
  61 80 08 80 d5 b9 40 00      01:35:31.965  WRITE FPDMA QUEUED
  60 08 00 78 85 67 40 00      01:35:31.965  READ FPDMA QUEUED
  b0 d0 01 00 4f c2 00 00      01:35:31.810  SMART READ DATA
  60 80 00 80 d5 b9 40 00      01:35:31.790  READ FPDMA QUEUED
Error 45909 occurred at disk power-on lifetime: 14644 hours (610 days + 4 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 41 0a 7f 85 67 61  Error: UNC at LBA = 0x0167857f = 23561599
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 00 0a 82 40 00      01:35:15.983  READ FPDMA QUEUED
  61 80 10 00 d4 b9 40 00      01:35:15.983  WRITE FPDMA QUEUED
  61 00 00 00 08 82 40 00      01:35:15.982  WRITE FPDMA QUEUED
  60 80 10 00 d4 b9 40 00      01:35:15.980  READ FPDMA QUEUED
  60 00 00 00 08 82 40 00      01:35:15.980  READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      50%     13330         -
# 2  Extended offline    Aborted by host               10%     13316         -
# 3  Extended offline    Completed without error       00%     13194         -
# 4  Short offline       Completed without error       00%     13192         -
# 5  Extended offline    Aborted by host               90%     13192         -
# 6  Short offline       Completed without error       00%     13172         -
# 7  Short offline       Completed without error       00%      5842         -
# 8  Extended offline    Completed without error       00%      4273         -
# 9  Extended offline    Completed without error       00%      2160         -
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
P.S. некоторые приложения падают при запуске либо при каких-либо с ними действиях с выхлопом segfault и разными ошибками.






