Установлен ASPLinux 9.2. (Ядро 2.4.20-9.asp). По USB подключаем цифровую камеру Canon A70. Камера не опознаётся.
Детали. В ядре включены опции:
General setup ---> [*] Support for hot-pluggable devices [*] Probe all LUNs on each SCSI device
Device Drivers ---> USB support <*> Support for Host-side USB
SCSI support ---> <*> SCSI support <*> SCSI disk support <*> SCSI generic support
USB support ---> <*> Support for USB <*> Preliminary USB device filesystem <*> UHCI (Intel PIIX4, VIA, ...) support <*> USB Mass Storage support
По команде dmesg имеем:
hda: Maxtor 6Y080L0, ATA DISK drive hdb: Maxtor 4D040H2, ATA DISK drive hdc: TEAC CD-W552E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=9964/255/63 hdb: host protected area => 1 hdb: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=4982/255/63 Partition check: hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > hdb: hdb1 hdb2 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 es1371: version v0.32 time 16:22:16 Feb 21 2005 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 usb.c: registered new driver usbscanner scanner.c: 0.4.9:USB Scanner Driver usb.c: registered new driver dc2xx dc2xx.c: v1.0.0:USB Camera Driver for Kodak DC-2xx series cameras usb.c: registered new driver microtekX6 microtek.c: v0.4.4:Microtek Scanmaker X6 USB scanner driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered
Вводим команду: mount -t vfat /dev/sda1 /mnt/camera Получаем: mount: /dev/sda1 is not valid block device
Почему невозможно обратиться к устройству sda1 несмотря на включение драйверов SCSI в ядро? Подскажите в чём дело и что делать? Заранее благодарен.
