Здравствуйте. Имеется проблема, мож кто знает. Пытаюсь прикрутить beholder m63 в tvheadend. Тюнер beholder m63 имеет аппаратный кодек mpeg2, linux почемуто видит отдельно тюнер и отдельно кодер: в dmesg вывод такой:
[ 9.272311] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 9.539062] saa7134 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.539075] saa7133[0]: found at 0000:00:0a.0, rev: 209, irq: 18, latency: 32, mmio: 0xee004000
[ 9.539089] saa7133[0]: subsystem: 5ace:6191, board: Beholder BeholdTV M63 [card=143,autodetected]
[ 9.539118] saa7133[0]: board init: gpio is 40000
[ 9.688025] saa7133[0]: i2c eeprom 00: ce 5a 91 61 54 20 00 00 00 00 00 00 00 00 00 01
[ 9.688047] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688066] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688085] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688104] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688122] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688141] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688160] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688178] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688197] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688215] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688234] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688253] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688271] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688290] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.688309] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff
[ 11.644515] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-1/1-002d/ir0 [saa7133[0]]
[ 11.732391] saa6752hs 1-0020: chip found @ 0x40 (saa7133[0])
[ 11.748020] saa6752hs 1-0020: support AC-3
[ 11.756148] saa7133[0]: registered device video0 [v4l2]
[ 11.756220] saa7133[0]: registered device vbi0
[ 11.756299] saa7133[0]: registered device radio0
[ 12.201529] saa7134 ALSA driver for DMA sound loaded
[ 12.201598] saa7133[0]/alsa: saa7133[0] at 0xee004000 irq 18 registered as card -2
[ 12.203337] saa7133[0]: registered device video1 [mpeg]
т.е. определяется
[ 9.539089] saa7133[0]: subsystem: 5ace:6191, board: Beholder BeholdTV M63 [card=143,autodetected][ 11.756148] saa7133[0]: registered device video0 [v4l2]
[ 11.756220] saa7133[0]: registered device vbi0
[ 11.756299] saa7133[0]: registered device radio0
и отдельно видится
[ 11.732391] saa6752hs 1-0020: chip found @ 0x40 (saa7133[0])
[ 11.748020] saa6752hs 1-0020: support AC-3[ 12.203337] saa7133[0]: registered device video1 [mpeg]tvheadend это программа-бэкенд в логе пишет:
[INFO]:v4l: /dev/video0: saa7134 Beholder BeholdTV M63 PCI:0000:00:0a.0 capabilities: 0x05010015
[WARNING]:v4l: /dev/video0: Device lacks MPEG encoder, device skipped[INFO]:v4l: /dev/video1: saa7134 Beholder BeholdTV M63 PCI:0000:00:0a.0 capabilities: 0x05000001
[WARNING]:v4l: /dev/video1: Device does not have a tuner, device skippedкароче /dev/video0 это сам тюнер без кодера mpeg2, а /dev/video1 это кодер без тюнера )))
вопрос: как сделать одно целое? или может както в драйвере настроить чтоб команды настройки передавались /dev/video0, а поток брался с /dev/video1? или может както можно создать виртуальное устройство /dev/video2 которое бы их обьединяло?
ваши мысли господа...
