LINUX.ORG.RU
Форум — Linux-hardware  

usb mass storage


0

0 

Поставил Slackware, не могу использовать кардридер Apacer ER151

---------------------------
#modprobe usb-storage

# cdrecord -scanbus
scsibus2:
        2,0,0   200) 'Generic ' 'IC1210        CF' '1.9C' Removable Disk
        2,1,0   201) *
        2,2,0   202) *
        2,3,0   203) *
        2,4,0   204) *
        2,5,0   205) *
        2,6,0   206) *
        2,7,0   207) *

# cat /proc/scsi/scsi
Attached devices:
Host: scsi2 Channel: 00 Id: 00 Lun: 00
  Vendor: Generic  Model: IC1210        CF Rev: 1.9C
  Type:   Direct-Access                    ANSI  SCSI revision: 00

# sg_map
/dev/sg0  /dev/sda

# mount /dev/sda /mnt/disk/
mount: Носитель не найден

--------------------
/dev/sda1 ... отсутствуют
★
← Выбор WiFi роутера.
G-Pen F350 (планшет) и linux →
Ответ на: комментарий от JB 

часть вывода dsmeg
 =======================
scsi 3:0:0:0: Direct-Access     TOSHIBA  TransMemory      5.00 PQ: 0 ANSI: 0 CCS
SCSI device sdb: 8058880 512-byte hdwr sectors (4126 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 8058880 512-byte hdwr sectors (4126 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
sdb: assuming drive cache: write through
 sdb: sdb1
sd 3:0:0:0: Attached scsi removable disk sdb
sd 3:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 1-8: USB disconnect, address 4
Buffer I/O error on device sdb1, logical block 15744
lost page write due to I/O error on sdb1
FAT: Directory bread(block 15744) failed
usb 1-8: new high speed USB device using ehci_hcd and address 5
usb 1-8: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
kobject_add failed for usb_storage with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03e86f7>] kobject_shadow_add+0x117/0x1a0
 [<c013fba4>] mod_sysfs_setup+0x24/0xb0
 [<c0141458>] sys_init_module+0x1648/0x1940
 [<c0102ae8>] syscall_call+0x7/0xb
 [<c0710000>] __mutex_lock_slowpath+0x40/0x90
 =======================
scsi 4:0:0:0: Direct-Access     TOSHIBA  TransMemory      5.00 PQ: 0 ANSI: 0 CCS
SCSI device sdb: 8058880 512-byte hdwr sectors (4126 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 8058880 512-byte hdwr sectors (4126 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
sdb: assuming drive cache: write through
 sdb: sdb1
sd 4:0:0:0: Attached scsi removable disk sdb
sd 4:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 1-8: USB disconnect, address 5
kobject_add failed for usb_storage with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03e86f7>] kobject_shadow_add+0x117/0x1a0
 [<c013fba4>] mod_sysfs_setup+0x24/0xb0
 [<c0141458>] sys_init_module+0x1648/0x1940
 [<c0102ae8>] syscall_call+0x7/0xb
 [<c0710000>] __mutex_lock_slowpath+0x40/0x90
 =======================

GenuS ★
() автор топика
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
← Выбор WiFi роутера.
Linux-hardware
G-Pen F350 (планшет) и linux →