CardReader Techsolo TCR-1630 (All in one)
Не хотит работать в линуксе, хотя нормально работает в оффтопике.
# lsusb его не видит:
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
# uname -r
2.6.17-rc1-mm2
# dmesg
usb 1-6: new high speed USB device using ehci_hcd and address 2
hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
usb 1-6: new high speed USB device using ehci_hcd and address 3
usb 1-6: device descriptor read/all, error -71
hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
usb 1-6: new high speed USB device using ehci_hcd and address 5
usb 1-6: new device found, idVendor=058f, idProduct=6362
usb 1-6: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Mass Storage Device
usb 1-6: Manufacturer: Generic
usb 1-6: SerialNumber: 058F312D81B
usb 1-6: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb 1-6: USB disconnect, address 5
usb 1-6: new high speed USB device using ehci_hcd and address 6
hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
usb 1-6: new high speed USB device using ehci_hcd and address 7
usb 1-6: device descriptor read/all, error -71
usb 1-6: new high speed USB device using ehci_hcd and address 8
usb 1-6: device not accepting address 8, error -71
usb 1-6: new high speed USB device using ehci_hcd and address 9
usb 1-6: device not accepting address 9, error -71
Кто может что-то подсказать?